I have created an animation where the objects move left to right.Is there a simple way of 'flipping' the timeline so that the animation effectively plays in reverse, rather than redoing the animation altogether?
View 3 RepliesI have multiple pieces on animation elements on my site. I'd like the animations to play when the user has scrolled to that position on the page and not beforehand. Right now, page loads, user is at the top of the page and all animations load and start playing. By the time I scroll down, the animations have ended.
View 1 Replies View RelatedI have started to work on an animation which will work as a splash-screen before the users see the actual site. (Yes I know... but the client wants it like this...)
The problem I have now is that the animation plays after a few seconds and that during these seconds it shows the content of the website. Besides that I still find it pretty difficult to actually position the animation the way I want.
I am using a plug-in for wordpress.
I tried fixing this with a pre-loader but this is also too slow. Is there any way I can force the animation to play sooner or to make sure they can't see the content before the animation has played?
You can find the concept of the website on: [URL]
I have the following
STAGE
SYMBOL_1
DIV_PLAY
MOUSEUP(COMMAND)
DIV_STOP
MOUSEUP (COMMAND)
[Code]...
I would like to do the following:
play "SYMBOL_2" - "DIV_ANIMATION_1" - "ANIMATION_1_START" from within "SYMBOL1" - "DIV_PLAY" with the mouseup command
URL....I know that i can sym.getComposition().getStage().getSymbol("div_animation_1").play(); from within "div_play" but how do i access a point on the timeline and play from there...
I start with several items on the stage, each an iteration of the same symbol. When I click on one, it performs an opening animation, then pauses. When I click on another, the first symbol un-pauses on its timeline, animating back to original position, while the second one I clicked plays its opening animation till its pause. Each of the symbols can tell the already deployed symbol to "play itself off."I'm sure this was done in Flash all the time, and there's a Javascript solution.
View 3 Replies View RelatedI play audio with the following code:
var a = new Audio();
a.src = "xxx.mp3"; //.ogg if IE
a.play();
It works on different browsers including IE, firefox and chrome, but have no sound on Safari. I tried Safari 5.1 on PC and on iPod 4.3.3. I tried .wav, .ogg, .mp3.
I have an embedded video in my animation , in an earlier state on my timeline I have a back button.
When the back button is pressed teh animaiton returns to this state but the video still plays in the backround.
The video cant be seen as its only appears at a later stage on the time line but the audio can still clearly be heard.
I have two symbols nested. On mouse over, the first symbol saturates the image, and moves it down. The second symbol makes the image cycle through three pictures. On mouse off, the slideshow stops, the image desaturates and moves up. This works really good!
I have a button below it, that when pressed, starts the timeline of the first symbol (saturates the image, and moves it down). This works great...but when I hover over the image, (after clicking the button), it snaps back up, and is desaturated. I'm not sure why it does that...I want the image to stay where it is!
I have a symbol，some timaline and labels in it.so now I want to play reverse between the Label A and Lable B but the action syntax is like
test1_play.playReverse();
so how can I play reverse rom LableB to LableA?
sym.playReverse ( position, executeTriggers )
position defaults to the current playhead position (which defaults to 0); If play is issued and the playhead is at the end of the timeline, play from the end.executeTriggers can be true, false, or null and indicates whether triggers at the starting position are fired:true - all triggers at the starting position are fired.false - no triggers are fired at the start point.null, undefined or omitted - triggers are fired at the starting position only if the timeline is being played for the first time, or if the starting position is different than the current playhead position as returned by getPosition().Description: Play the default timeline in reverse from the given position given in milliseconds (if position is a number) or as a label (if position is a string).
I have two compositions on a page and I identify them within the AdobeEdge.bootstrapCallback. As soon as the user scrolls to the first animation I want to start it with an external call (compId.play()). If this is the only composition on the page it does work correctly. But as soon as the second one is added to the page it doesn't play at all. If I trigger the first animation via the console (e.g. compId.play(1000)) the animation jumps to the 1000 ms mark but then it stops immediately and doesn't play on.
View 4 Replies View RelatedI have and element and what I'm trying to do when I click on this element, it starts to play reverse the timeline for 1 sec and after that it continues to playing the timeline from an other point.
View 3 Replies View RelatedI'm doing an animation where I have a 2d side scrolling concept.
I have a side scrolling world with road, and the user controls a car driving left or right from one area to the other. The user controls the direction of the car via keydown (arrow keys).
Now the problem is, if the user presses right, then it works fine and the car drives forward to where I want it to stop. But if the user presses left to go back to a previously visited area...the car reverses to the previous area.
The way the keydown events control the timeline is simply if the user presses the right arrow key I simply call sym.play(); and when the user presses the left arrow key I call sym.playReverse();
how I can manage to either swap the car symbol with another symbol...or flip the car symbol 180 degrees.
The desired effect is, if I call the play action the car must face right > and when I can the playReverse action the car must face left <
How do I add animation to Muse? I wish to bring a png file into an existing background.
View 1 Replies View RelatedI create a child symbol on the stage animate it and store the varible in the window
var infoscreen = sym.createChildSymbol("_01", "stage");
window.infoscreen = infoscreen;
I put a Btn_inside the symbol and want to delete it. But first - I want to fade out the symbol. I dont know how to do this. So the animation has to be complete before delete, but how?
infoscreen.getSymbolElement()
.animate
([code]....
Is there a way to speed up animation? For example I have 5 sec animation. I want to play it normally (5sec) and play it reverse for 2 sec.
View 5 Replies View RelatedI am using the rollover and rollout features to get a slide up and down kind of button panel. However when I rollover each of the three section (it's divided into three panes) it gets really twitchy and won't do the roll up and down smoothly are do it at all. URL....
View 1 Replies View RelatedI have this button that, when clicked, opens a new URL - window.open("http://www.xxxxxx.xxx", "_self"); - after playing a 1000 ms animation. The problem is that it changes to the new URL too soon, before completing the 1000 ms. I tried a setTimeout, and it worked great, but it's not so elegant as it depends on the user's computer/net speed...
View 18 Replies View RelatedHow do I make my animation play when someone scrolls down where the animation is located?
View 30 Replies View RelatedI created a simple banner with a couple of basic animations. I never even touched any code. Only basic images are used, no triggers, no symbols.If I preview within Animate, everything works fine.
As soon as I hit ctrl+enter to preview in my browser, everything just stays blank. I checked in multiple browsers, all have the same result with no errors in console.Autoplay is turned on.
I am a graphic designer and I work on w7 64.I find the latest version of Edge Animate.I saw several tutorials, amongst those showing how to make a loop on an animation. I proceed as explained in the preview on my browser (Chrome), the animation runs, but no loops.In fact, I tried other interactions and other triggers : nothing of these works there!
View 5 Replies View RelatedI need to create a mask that will hide the elements as they rotate out of a free-floating window. I have an animation currently that sits in a circular window and plays when the page loads. The screen shot below is from the page in Muse with the .oam file playing. The images are PNGs with transparent backgrounds so the animation plays over the background images.
What I'm trying to add is an iris effect I've animated in Edge Animate. I haven't been able to hide the edges of the vanes in the iris during animation. I've tried to cut and paste code that I've found on this forum and others but I don't know much about coding and I haven't had any success. This screenshot is shortly after the animation starts to play as the vanes rotate out of the window:
Basically, I need to mask the iris animation to keep the images from showing outside the circular frame. I've found that the clipping tool in Edge only does square or rectangular masks. I have a PNG that I can use as a mask but the coding has really got me flummoxed. The mask:
I just made my first edge animate project and made a progress loader animation. Works well.When i placed the code in the site the animation was always on, so i've hidden the item in css
#Stage { display:none; }
When my animation is needed i'm making is visible however the animation has already been started in the background so wont begin the right place. I'm wondering should i stop the stage autoplay in the config and then start the animation in JS? If so how can i go about starting the animation via JS.
I've been playing around with AdobeEdge.bootstrapCallback but cant seem to get it to play.
I created an animation for a landingpage on my website(built with wix.com).
My problem is, that wix.com has got no folder-organisation or upload-function and my Edge animation has *.html, *jscript and *.jpeg/*.png files.
In a Wix.com-forum, I've found a response, that said, that I should use external storage-websites for my files.I did so and put these files in my dropbox/public folder, copied the open links in the *.html file like this:
<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
<title>Ani1</title>
<!--Adobe Edge Runtime-->
<script type="text/javascript" charset="utf-8"
[code]....
But, when I copy the code into my wix-page-html-app (for not-wix-user: a small field to insert html-code),nothing happens...
i created an animation for my index page of an already existing website. i tried to "publish settings" but app would not allow me to publish to my directory however it did allow me to "publish". when i uploaded the files to my server, only the splash image came up but the rest of the animation did not run. what am i doing wrong?
View 4 Replies View Relatedi have a little problem with my animation. If I want to see the animation without SSL it works. With SSL it doesent works and I dont know why?
My CC ist the newest and I tryed everything but the animation is not displayed on https://
when I import a project .oam in InDesign, and over the project, into a higher level, there is text, the text is covered from the animation when it run in folio.
View 1 Replies View RelatedI created an animation and am having an extremely difficult time figuring out how I can display it on my Joomla website. I am using a Yootheme template and have spent countless hours trying to get this to work.
View 2 Replies View RelatedHow to submit an animation project to a remote co-worker, or to a client?
View 2 Replies View Relatedhave made draggable and droppable objects in my project. Everything is working great but also i have made a button Restart. The function of restatrt is that by pushing on this button everything goes on its places. Like reloading the page (but of course without reloading) How can i do this? Because i cannot do anything honestly.
View 6 Replies View RelatedI am trying to get an animation to auto play, and loop only a particular part of the animation.
For example, the first part of the animation is my logo dropping in and bouncing. Then certain parts of the logo are animated continually, but I cannot figure out how to do this without just creating a huge timeline?
how use animation loop without trigger?
I tried to do mouseover
var my_time = sym.getSymbol("mySymbolInstanceName").getPosition();
if ( my_time == 0) {
sym.getSymbol("symbolName").play();
}
loop not work.