I have the program and when I try to make GIF's, it will sometimes give me an error saying "not enough memory to complete the operation". The folder I have contains 50MB of .jpg, yet I can't make a GIF because I don't have enough memory?
AMD Athlon X2 4400+
gigabyte ga-ma78gm-s2h
4*1GB DDR2-800
Vista Business 32-bit
I have these two clips I want to make animated .gifs out of but when I open ImageReady 7.0 it says, "Quicktime is missing software required to preform this operation. Unfortunatley, it is not available on the QuickTime server". It still lets me open the clips though, except all the frames are blank.
View 5 Replies View RelatedI'd like to ask you what it is different between the ImageReady CS2 and Adobe Photoshop CS2, I am very confuse about them, they looks not different for me.
If i want to chose one of them for design webesite, which one is better?
When trying to open Adobe PhotoDeluxe 4.0 Friday, a window opened saying there was not enough RAM memory. Earlier in the week I had upgraded to 1,5 gigs of RAM.
I am 71 and have used Adobe PhotoDeluxe for a dozen plus years. Never any problems when I was using Windows 95, 98, or XP with far less RAM.
I've been told by a computer service tech that the installation of Windows XP Service Pack 3 caused this to occur. I've downloaded the Adobe update 4.0.1 for this program.
I want to make an animated gif with team logos. I know that I need to put all the images of the animated gif into a photoshop file first with layers, but how do I place my gif images onto the photoshop file? Photoshop only allows you to place AI, EPS, PDF, and PDP files.
View 1 Replies View RelatedAfter years of uploading photos with a memory card reader, Adobe suddenly stopped recognizing ithe reader and I can't upload anything. I bought a new reader and got the same results.
View 2 Replies View RelatedI have just installed Illustrator 9.0, running on Windows 7. The install was fine but when I try to launch the program I receive the following 2 errors:
1) "Pencil or smooth tool out of memory. Try editing at a smaller zoom magnification".I click OK because that's the only option. The next error window occurs with:
2) "The filter cannot complete because of an unknown error" Error: IMEM.I click ok again because that's the only option.
Then the program crashes and I have to exit.
II had 512megs of memory and occassionally had out of memory issues in photoshop.
So I spent $100+ to get 1 GIG more and now with a total 1.46GIG's of RAM installed and I STILL get the famous error
"Could not complete your request because there is not enough memory (RAM)"
In fact, I am getting MORE out of memory errors in photoshop with 2X more RAM than I started with..
I originaly had the default 50% ram given to adobe.. and then tried 75% and still get the errors 90% of the time.
I checked windowsXP Task Manager Processes and indicates that photoshop is using no more than approx 300-400megs of ram with approx 1010megs being given to photoshop, YET according to Processes, photoshop.exe is only using between 41MEGS - 400megs.. Processes claims a Commit Charge of "2244M/2688M"
Adobe recommends 384Megs of ram.. If that is the case, HOW can I be running out of memory if I have 1.4 GIGS?
Cache is set to 1.. I've tried up to 9..
The computer:
CPU: Pentium 3.0 GHz
RAM: 1.46GIGs
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies View RelatedI had Photoshop CS6 installed and working on my Mac using Adobe Creative Cloud. However now a dialog appears that says "Help Improve Adobe's Product". Regardless if I approve this dialog or not Adobe Photoshop starts up with every menu option grayed and I can do nothing. I have to force quit the application. At this point it is 100% unusable.
I've googled it and seen others with a similar issue but no solutions found. I have OSX 10.8.3.
Others with similar issues. URL....No real solution other than don't use Mac Keeper (which I do not) URL....
Product: CS4 64 bit: Adobe Output Module-Adobe updater downloads 2 updates 75.9mb (Camera Raw 5.3). After download and permission to continue under user account control, I receive popup menu advising me that Installation Incomplete, close Adobe Bridge - 3 choices, which always fail. My Adobe CS4 and Bridge are not open. I tried this several times with the same result.I downloaded the zip file, saved, unzip, and still get the same notice - close Bridge.
View 2 Replies View RelatedIt looks like the same 2.3mb file that the update program is trying to download. Once the update is started it just keeps trying to download that file until I cancel the update.
View 3 Replies View Relatedhow I changed the background on an animated gif, from white to transparent, on all frames, at one time. I did do that using ImageReady, didn't I? I must be having a major senior moment.....
View 2 Replies View RelatedI have a psd that looks right but when I save optimized the layers that have been duplicated and moved to other locations sit on top of each other.
View 7 Replies View Relatedhow do i make a basic animation. everytime i try to edit a frame it edits all the frames as the same!
View 1 Replies View Relatedi am trying to make a website with imageready, and i have the animations saved, but it wont let me optimize it (in the box) so then it automatically makes it a jpg, and i cant find a way to get it to a .gif.. because i want the animations.
View 5 Replies View RelatedDon't tell me that ImageReady does not come with Photoshop CS3! Where is it? How do we optimize and slice images for the web?
View 29 Replies View RelatedI just started working with Photoshop and IR CS2 recently, migrating from PS 7. I am working on an image in photoshop and I want to jump to IR to add some rollover buttons. When I jump to IR and preview my work in IE or firefox, or view in the optimized view, it moves my images. It looks the way it should in normal view, but in the show optimized view things are moved. Why does it move the images? It seems in PS7 IR and PS worked more harmoniously. What has changed?
View 1 Replies View RelatedI was working on an image, and I wanted rollovers. I finished those up and went to save it [Save Optimized As...] and realized it was saving the images as .gif files. That's no good; it's a large image that looks terrible in .gif format.
I have been trying for quite some time now to get it to save as a 100% Quality, 0 Blur .jpg, I know I've done it before, and now it isn't working. As far as I can get is 60% [High; I want Maximum].
i have a pretty noob question, how do u make button rollovers for a website through photoshop/imageready? once my layouts are sliced, how is it possible to make rollovers? do i have to use dreamweaver? (i.e.- navigation text underlined when mouse is over it..) something basic as to that.
View 7 Replies View RelatedOpening .avi files into IR
When I try to import/open an avi file in ImageReady, the import/open window comes up but then another window pops up telling me that quicktime does not have the plugins required to import the file and the plugins are not available on the quicktime server, when i proceed to import/open the image turns blank. I tried updating my quicktime, I updated image ready.
I have been looking but can't seem to find a good tutorial on how I can create a website using Photoshop and Dreamweaver. Anyone know of any good ones? I see talk of using ImageReady...anyone know of a good tutorial on how to do this as well?
View 1 Replies View Relatedwhen I use the pen tool to select and copy something in photoshop and then paste it in imageready, it has a blank background for what wasn't selected.
View 2 Replies View RelatedI have some text in one animation frame and in another frame it's supposed to move and get smaller. The problem is, when I adjust the size of the text (smaller) in the second frame to tween it later, the text size in the first frame gets smaller as well. I hope I make sense. Is it possible to tween text and make it get smaller in imageready?
View 4 Replies View RelatedI just made this .gif in ImageReady, and I'm wondering how to get rid of that pause between the last and first frame.
View 3 Replies View Relatedi created 3 frames of a pic, but when i edit like the 2nd frame all 3 frames change. how can i get it so i can make each frame individual. and, is there a way to change a lens flare color?
View 2 Replies View RelatedI am trying to put together a powerpoint presentation and would like to insert a map on one of the slides. I want the map to show an animated route like you see in the Indiana Jones movies, starting at one point with a line drawn to another point. The line should look like it is being drawn, not just appear.
View 2 Replies View RelatedI'm working on an animated texture which features a frame (think picture frame) that has text panning through it, but I don't want it to show up on the outside of the frame (picture frame). How do I make this text slide through the frame, but not show up on the outsides?
I guess to try and make it easier to visualize, picture a yellow smiley face ( > <) on a white background. Next, picture a red bar sliding from the right side of the image, across the smiley face, and then off the left side of the image. Now, imagine that the red bar does not
Is there a way to get imageready cs to write the html using a percentage for each slice so the website will adjust to different resolutions I have many templates that I have downloaded and that is the way they are and they fit any resolution
View 1 Replies View Related
