Product: CS4 64 bit: Adobe Output Module-Adobe updater downloads 2 updates 75.9mb (Camera Raw 5.3). After download and permission to continue under user account control, I receive popup menu advising me that Installation Incomplete, close Adobe Bridge - 3 choices, which always fail. My Adobe CS4 and Bridge are not open. I tried this several times with the same result.I downloaded the zip file, saved, unzip, and still get the same notice - close Bridge.
After installing CS2 on my new Vista computer when I start Photoshop I get the message "The Adobe Updater could not be started, please reinstall application and components." Knowledgebase ID 331634 offers solutions for Windows 2000 and XT, but not for Vista.
I'm running Photoshop CS3 on Mac version 10.7.5. Every time I open PS I get the error message "adobe updater quit unexpectedly". Once I click out all I see is a white box for "Adobe Web Suite Premium CS3" that is blank. It can only be minimized - not closed. Everything else in PS is greyed out and unusable.
Error message (No connection - Please check you internet settings and/or firewall. Waiting for connection....)
I have attempted to check all internet settings in my Google Chrome browser and in the Windows firewall I have included it as an "Allowed Connection". Still no joy, unable to connect and of course no updates?
I tried to install the update with Adobe Updater and it failed with error code U44M1P7.I then downloaded the update patcht directly from the site and tried to install. Again error code this time U44M2P7.
Output sharpening in Adobe Camera Raw (ACR) and Photoshop CS5 I want to do two-pass sharpening - capture and output - with output capture done just before I print. I do the initial (capture) sharpening in the ACR Detail/Sharpening panel, with Amount slider set to, for example, 100. Then, I open the image to PS CS5 as a Smart Object, and use layers and masks for further editting.
My question is, can I go back to ACR for the final (output) sharpening pass? When I re-open the file in ACR, the Sharpening Amount slider is back to zero, but the other three sliders are still at the settings I used at the start of the process, i.e., the capture sharpening. If I again set the Amount slider to a positive value, then again open the image in PS for printing, will my second pass through the ACR Sharpening panel take effect - will it accumulate on top of the initial sharpening?
By the way, the reason I want do output sharpening in ACR rather than, say, PS Unsharp Mask, is so I can use the Masking slider in ACR, which is much easier than the comparable techniques available in PS. I am aware that some say you should not do any masking for the output sharpening. I'd like to though.
I'm changing computers and need to transfer over my custom document output settings in Bridge but don't know how to locate them. I have several types of custom documents.
I'm creating video clips in Corel Video Studio X4 Ultimate (Education),for use in creating multimedia PDFs with Adobe Acrobat X Pro.
The formats Adobe Acrobat says is accepts include MPEG 4 / H.264,so in Corel Video Studio X4 I've tried selecting the following types of output file:
1) "MPEG4: iPhone H.264 (640 x 480)" My preferred resolution, but Adobe Acrobat won't accept it, apparently because it's "Sony PSP" (according to an analysis by MediaInfo), not supported by Flash, according to an advisor on the Adobe forums.
2) "MPEG4: iPod H.264" (320 x 240) This is accepted by Adobe Acrobat, even though it's also Sony PSP (according to MediaInfo). But this isn't enough resolution for my purposes.
3) "MPEG4: iPhone 4/iPad HD" This is also accepted by Adobe Acrobat, but the resolution is too high (1280x720) as the files are too large.
I had Photoshop CS6 installed and working on my Mac using Adobe Creative Cloud. However now a dialog appears that says "Help Improve Adobe's Product". Regardless if I approve this dialog or not Adobe Photoshop starts up with every menu option grayed and I can do nothing. I have to force quit the application. At this point it is 100% unusable.
I've googled it and seen others with a similar issue but no solutions found. I have OSX 10.8.3.
Others with similar issues. URL....No real solution other than don't use Mac Keeper (which I do not) URL....
It looks like the same 2.3mb file that the update program is trying to download. Once the update is started it just keeps trying to download that file until I cancel the update.
I'd like to ask you what it is different between the ImageReady CS2 and Adobe Photoshop CS2, I am very confuse about them, they looks not different for me.
If i want to chose one of them for design webesite, which one is better?
When I export RAW files, specifying that I want the output to be in sRGB color space the resulting files have the Adobe RGB color space. The same is true if I specify I want them in ProPhoto. Is this a bug? I have done it successfully in other versions of Lightroom, but not in 4.3.
We were talking a while back, about the apparent demise of the Output Module in Bridge CC. In case this slipped you by, John Nack blogged this info a couple of days ago: URL....
Just upgraded to CS5.1 I see contact sheet II has changed and is handled by Bridge / Output module.I don't like that you can't print directly from Bridge, but have to save as a pdf, then reopen the doc and print from Reader or PS.I can only hope that changes.
I created a custom layout in Bridge, 3.9 inch x3.9 inch at 300ppi. 3 across and 3 down. Made the contact sheet, saved as pdf. Opened in CS5.1Here's the problem. The document which is suposed to be 3.9.x3.9 (square) is actually 3.092 inch x 2.318 inch (not square!).
The reason for the problem is that I drag and drop the contact sheet onto another document template (it has logo, name, etc.) to print. The other document is 4.5" x 4.5" So the contact pdf doesn't fit the template. (This used to work great in CS3 as you didn't have to save the contact sheet as it was created. It was a layered doc which you could drag onto another doc / template.) I can't see any reason the contact sheet would not be the same as created in Bridge / output mod. when opened up in CS5
if the print module sends srgb data to the printer by default?
The reason is I use a rip (it controls the printing) and the input needs to be matched so srgb > srgb this is the setting I have at the moment, but then someone meantion it was prophoto rgb which has me thinking?
I have isolated two issues in AE CC where I can duplicate a failed render with this message:
After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
This happens when opening an AE CS6 project and trying to render a simple comp with only one text layer and a moving mask. It also just happened after my first round trip test with Cinema 4D. I could RAM preview the c4d layer but the output to Quicktime h.264 failed.
I have even tried a full reinstall of AE CC. I have the basic FxFactory Pro plugins and MagicBullet Looks installed, but neither are being used since this is a single 1280x720 comp with a single C4D layer. Plus like I said it failed with the same error in past CS6 files.
I don't know how to force disable a plugin to test that, but I can't see how an unused plugin could cause a render to fail like this.
I'm on a new (late 2012) 27" iMac 3.4 GHz Intel Core i7 8GB RAM NVIDIA GeForce GTX 680MX with 2GB VRAM OS X 10.8.4 AE CC 12.0.0.404 CUDA driver 5.0.59
Currently you have to check a box, and then build a module for H.264 export.
We all get it that you want people to use Media Encoder. But I never use it. It forces me to render a separate file, then re-render that file. I don't need the extra lossless files floating around my machine, and H.264 mp4's looks great coming straight out of after effects.
Since upgrading I've had set up 4 people output workflow. They all went back to making huge MOV files.
I know Adobe Photoshop Extended can be used for 3d modeling but can just the normal Adobe Photoshop CS4 be used in the same way because i dont feel like buying it for $1000 but I need Photoshop for my 3d models for texturing. So can the normal Photoshop be used the same way as the Extended can and will not make a difference?
I received a message that an Adobe Raw update was available. I started the update and it told me to close PS CS6 which I did.
I restarted the update and it continues to give me the message to close CS6 even though it is already closed. I tried rebooting and had no affect on this problem.
I am currently running a Mac with OS 10.8.2 and have installed Adobe CS 5.5 Production Premium. Within Photoshop- Preferences- Performance, Photoshop is only recognising 2100MB of RAM, while my Computer has 16GB of RAM available. I have checked and according to the OS Finder, this 16GB is active.
I have also checked across other Adobe programs such as Adobe Premier and have confirmed that here it is also recognising the Available 16GB of RAM. Thus it is only in Photoshop that this is occurring. I have since deleted all of my preferences from both the user level and the hard drive but no recification. I have noticed a recent discussion which sounds very familiar, [URL]....
however this is on a windows based system and the last suggestion from a user was to a windows related issue and I am not sure that fixed the issue for them or not.
I am about to purchase Adobe CS6 soon. Noticed that the specifications say it needs at least Win XP or Win 7. I will be using Windows 8 & need clear clarification that Adobe CS6 will work perfectly and smoothly on Windows 8. If there are serious setbacks or problems to using adobe cs6 on Win 8.
I don't own Creative Cloud but use OS X 10.6.8 on the i Mac (2011 model) working with previous versions of Adobe CS products ( Photoshop, Illustrator, InDesign, etc.) for my creative work.
Will these software applications work with the latest OS X Mavericks without any hiccups, even if my system doesn't have any Retina display resolution? I've been considering upgrading to Mavericks but wanted to make sure.
I have cs6, I want to scan from the program, My all in one Lexmark is not recognized? I tried to get a plug in from Lexmark, they said they don't support cs6?
i use Adobe Photoshop CS5.1 and i know that it's possible to add some fonts on it. I've downloaded them but don't know where to put them, i can't find the "Fonts" folder in Adobe folder. Also i want the font that is on this website: URL....
