I had to reformat My Hard Drive and then i re installed photoshop CS2. now whenever i open photoshop an error comes up that says "You are not allowed to continue because your account does not have the proper privileges. Please log in using an account with administrator privileges and try again" even tho i am the administrator. it was working fine before i reformated my Hard drive.
View 1 RepliesI have encountered a bit of an issue. i have used my CS4 photoshop for years now on my original administrator account which is the account I installed it on but now when i try to open it I get the splash screen and it starts to load and then where it should fully open it just goes away?? I can log in to any other account on my computer and it opens just fine. have to sign out go to another user account edit then log out and then back in to my normal admin account
View 15 Replies View RelatedEvery time I try to log into my Adobe account the little wheel spins and spins. Right now it's been spinning for 10 minutes. The log-in email and password are correct and I get no notice that the user name or password are incorrect. I have to change the password every time I log in. And why do I need to log in to download Camera Raw 8.2 anyway?
View 8 Replies View RelatedHow can i change country?
View 1 Replies View RelatedI have a problem with Photoshop CS, working in a limited account.
Namely, in admin account PS has in 'Save As' File Types list, among others JPEG file type.
But in limited account there is no JPEG file type in the 'Save As' list, so i have to go to 'Save for Web' to compress psd file.
I presume that's something about ntfs permissions, so i assigned full control to COMP/Users for Photoshop folders in 'Program Files' and 'Common Files', but to no avail.
Is there some Windows compressor, to which PS is addressing to compress files, and if so, where it could be located? If i knew that, i could assign user permissions to it.
I had serious corruption issues with the user profile I was using when I setup my CS3, when I created a new user account and tried to open PS it says my licensing is no longer valid... This is rediculous, surely this is a mistake right?
View 6 Replies View RelatedJust performed 10 installs of CS5.5 design Premium on Mac Intel Towers running 10.5.8 and 10.6.8. On three of the machines the PS app in 64-bit mode crashes on launch from the Standard user account. In the Admin account it opens in 64bit mode no problem. In the standard user account if I switch to open in 32-bit mode it opens without issue.
I have uninstalled and reinstalled three times. ( as per Adobe ) There are no third party plug ins, even if there were why would it run in the Admin account?All other Apps in the CS work fine.
I tried browsing my computer for the default program to open .psd files, but when I double click photoshop cs6, it doesn't show up in the list of default programs. Photoshop can open .psd files automatically in other user accounts, but not on mine.
View 2 Replies View RelatedRecently, when I try to open Photoshop elements 9, I am asked to allow PSElements 9 adobe systems inc. to make administrative changes to my computer. I have had Elements 9 on this computer for 2 years without being asked for this permission. If I click yes, photoshop opens, if I click no, it doesn't open so I then have to click yes!
View 5 Replies View RelatedI see how to establish a new shutterfly account, but how do I link to an existing account?
View 1 Replies View RelatedI just created my account to do the trial of the ps photo editor, but I don't know how to open the actual application?
View 1 Replies View Relatedi have another photoshop account under a different email.i tried to sign into it after not signing into it for years. yahoo told me the account had been deactivated due to no activity.
if i don't remember the password for that old photoshop account, how do i recover the password if i can't sign into that old yahoo account anymore?
i actually remember the password now but i already hit the button to send the reset the password email. thats how i discoved my old email account was deactivated and i couldnt sign in.
I'm at the stage where I input my date of birth and choosing a personal URL for Adobe Photoshop Elements 9. I DO NOT use symbols. I have tried simple words and names and sometimes include numbers. I've checked both boxes referring to updates and agreeing to the Terms of Use. I click on Update Account and I get this message:
"And error has occurred, and your changes were not saved."
I have registered the program on the website. My account is identified and recognized. Why can't I get passed Update Account? Why must I have a personal URL if it's the only thing stopping my progress?
We would like to be able to store all of our drawings on the Autodesk 360 cloud but have two users in different locations and want to share a common account. We already have two separate accounts with our 2004LT but that requires each of us to set up sharing for the other, notification, etc. If we purchase two seats of 2013 AutoCAD LT can we both use the automatic save (to 360) with the same account user name and password? 25GB of storage with one subscription is plenty for our needs but the main objective is that all of our files would be in the same account and there wouldn't be any chance of us having slightly different versions of the same file in two different accounts.
If one guy is logged into the account will that prevent the other from gaining access until the first one signs off? I saw something on Autodesk's site saying they were working on being able to combine cloud units but they don't have it yet. I don't know if this would also allow combining separate subscriptions?
I have had a Corel account for several years. I bought, downloaded, and installed PSP X6 Ultimate several days ago. When I first loaded it, a window appeared asking me to register for a "Corel PaintShop Pro X6 Membership" (Standard), or to login under my existing account. However after I fill in the blanks for either new or existing membership and click the button, nothing happens...absolutely nothing. Then a smaller window opens that asks me to sign in (or if I'm not a member, offers an opportunity to learn more about PSP X6 Membership). When I fill in those blanks and click the button, I'm notified that I am not a member, so I click the link to learn more about PSP X6 Membership and am directed back to the window that doesn't do anything.
View 1 Replies View RelatedI recieved my serial # and product key.
But I can't apply it because the site states my account has not been activated. It places me into a loop to resend to my email to activate my account. I'm in a never ending loop. There seems to be a glitch to the site.
I was using some horizontal guidelines to line up text, and was infuriated to find that this doesn't work because Draw snaps the bottom of descenders to the guideline, instead of (duh) allowing them to descend below it.
View 7 Replies View RelatedWhen I export as a jpeg the images obviously are compressed, however, they also get darker and more saturated. Is there anyway to compensate for this without having to overcorrect the image before exporting?
View 4 Replies View Relatedway of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner?
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
AutoCAD LT 2011 has been installed in a Windows XP computer.When logging into this computer using the Windows Administrator Account, all AutoCAD LT 2011 features are available.
But when logging into this same computer using the Windows Limited / Restricted Account, all AutoCAD LT 2011 features are missing.How can we get all the AutoCAD LT 2011 features back using the Windows Limited / Restricted Account?
I run a school provided MacBook and i recently updated my OSX to Lion but now my Cs6 wont work.
View 21 Replies View RelatedI have just purchased a Nikon D600 and have CS5.1 and find that it will not open raw images. Is there a solution or anticipated download for these purchasers?
View 2 Replies View RelatedI recenlty got a new computer and loaded my adobe cloud onto it. The first few times it worked fine but today it only minimizes into the lower tool bar and never opens. It won't even let me max it it's just the main splash screen minimized. I tried uninstalling and reinstalling but it's not working.
View 2 Replies View Relatedjust got a D70s and the NEF files won't open in photoshop. I'm using the latest 2.4 raw plug in.
I haven't loaded any of the supplied software yet, which is just picture project 1.5 I thought that NEF's could be imported straigh into photoshop
I can open RAW files at work on CS3 that has my olympus softwear on the computer, but I can not open at home in CS3. get message (can not open this type of file ) Do I have to have the olympus factory softwear installed to open olympus RAW files ?
View 2 Replies View RelatedI have a pdf file that was created with Illustrator and that is supposed to show all the design layers. However, I am not able to see the layers when I open it with CS3 because it automatically rasterizes the file before opening it. Is there a a way to make it open teh file without rasterizing it?
View 1 Replies View RelatedI have photoshop 7.0 and i use it often but a week ago everytime i would open photoshop it would load the fonts/brushes/etc. But after its done loading it just shuts off without giving me an error message.
View 3 Replies View RelatedI have Windows 7 , Photoshop was working fine! Next time I tried to open up CS2 ....I clicked on the program and nothing happened. I tried CS5 and nothing happened.
View 4 Replies View RelatedI Have transferred a CS6 Raw photo session from camera to hard disk. Now some files show all camera details and they are working fine but some files show only right photo number and proper file size and Photoshop can't recognize them. The file names are exactly same type. Is there any way to fix these hidden files?
View 7 Replies View RelatedI have canon 70D photoshop cs5/6 lightroom 5 camera not supported downloaded DNG still won't open raw files even though I have put settings right in DNG 8.2
View 4 Replies View RelatedSo I use Photoshop a lot. I think I got CS6.Anyways. Last week I could play 3 internet files, two movies, photoshop 5 different documents and much more. However, now I can't open internet and do photoshop. I have to restart my computer to run photoshop and make sure I don't use any other program. Sometimes the file only lasts 30 minutes before it won't allow me to edit.
I have A LOT of room left on my computer. 706GB free of 907GB. I tried to clean my computer, but that didn't work. It also is saying extrusion file is curruptied or damaged.