I am a newbie and simply take my Panasonic Lumix .JPGs at about 5,800 kB, open them in the advanced editor and then simply save-as - no editing, no resizing etc. They then are saved at very low resolution of 281 kB. Must be a setting somewhere, but did not find any answer.
View 4 RepliesProgram that I use call Sketchup. In SketchUp you draw model of a building to post it in google Earth but it can't be any larger 10 MB what makes the file size grow is the pictures that you applied to your model, (Downsample all texture files that have been used to paint the surfaces. Take each texture into a photo editor and reduce the resolution) this will supposedly minimize the file size? Is this possible when I transfer my photos from SketchUp back into Corel , how do I reduce the resolution so it would reduce my file size?
View 2 Replies View RelatedI want to take my out of camera image, which is at 314ppi at about 9x12 and crop it to 8x10 at 300ppi. But, when I go to the crop tool, and click 8x10 preset, the resolution is set at 72ppi, and i can't see how to change that. So, the preset crop tool gives an outline of the crop area that is very small. The picture itself when it comes up is something like 33 " x 38" at 72ppi. If I go into resize image, it gets time consuming; you'd think I could just select the 8x10 preset at 300ppi and get a file that is about 2400 x 3000 ppi....8x10, 300ppi.
View 4 Replies View RelatedI have resized my images to an 8 x 10 format, but when I sent the files to my print lab, they told me they are less than an 8x10, with a resolution less than what I had indicated in prox3.
View 2 Replies View RelatedJust came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedI was asked to design an advert for a magazine by one of my web clients.....
I went and set the size of the advert to A5 (see original settings attached) and completed the advert. I got a call from the magazine company saying that the advert was too "small" and that they needed the image to be at least 300dpi. They said that I needed to "set up the palette to 300dpi" (I think they were referring to Photoshop)
Boy, so I'm faced with having to go and redo the whole job.
My questions are: When I set up the new job in PDN it tells me that the New Size is 2.0Mb, but when I finished the job it had gone down to 295kb - How do you set up the whole job to result in a resolution of 300dpi?What is the relationship between pixels/cm and dpi?How do you set up the job for the right size ie A5 but increase the resolution?I'm loathe to ask this question here but will it be better to go and design this advert in something like Gimp?Designing for a webpage is the exact opposite as for designing for print because with the web you want images to be very small. Here I need the finished advert to be 2Mb is size. At the moment, the finished advert is only 295kb.
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedMy program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View RelatedHow can I resize an object bigger and still keep it at high quality. The resize tool makes the image look blurry.
View 5 Replies View Relatedif is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies View RelatedI want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
The DPI is modified from 96 to 192 and the image pixels is also scaled to twice resolution.But the screen the images size changes from 3 inch to 6 inch, when 100% zoom.This is wrong, the image should be displayed in what the size the image is.
View 2 Replies View RelatedFor some reason now when I import a high resolution bitmap file into Photo Paint for editing it reduces my dpi to an extremely low resolution. It just started doing this today.
View 5 Replies View RelatedNo matter what resolution I save a jpeg at, they all seem to open at 480 dpi. I would like my jpegs to open at their native resolution. I have looked through the options and settings, but can't find the command to change this. (When I go to resample it always displays 480 dpi)
View 10 Replies View RelatedI have some really large blueprints (black and white). Some of them exceed 30000 x 8000 in size. I want to reduce the overall size of these but when I try this my image gets really fuzzy. Is there a way to make these images smaller without messing up the clarity?
View 7 Replies View RelatedWhat I'm after in an 'increase photo resolution' tool similar in result to PhotoAcute Studio (without the hefty price tag). I suspect this may be available but named something else.
View 2 Replies View RelatedI'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies View RelatedI am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies View RelatedOk, either I am totally loosing it, or it just ain't happening.
I cannot get the Nik HDR module to work with my PSP X5
It's installed, it shows up in my Effects menu, but it only imports one of the photos I have opened in my edit tab.
What am I missing??
i have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
Using PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
I installed PaintShop Pro Ultimate X3 several months ago. It worked fine initially, but then stopped running and gave me an error message pertaining to a language error. In an effort to fix the problem, I have completely uninstalled the application and removed all of its registry entries. I then reinstalled the program, which appeared to be successful, however, now it simply will not run and gives no error message whatsoever. When you click the desktop icon, it tries to load momentarily, then does nothing more.
I have removed my virus protection and my User Account Control.
What is the best method to upgrade from X3 to X5...should I remove X3 first for example?
View 2 Replies View RelatedDuring preparing a collage, when I try to save the project, I receive the the message that I don't have enough memory.I am using windows 7 and as far as I know, I don't have memory problems. I am working a lot with VideoStudio x4 without any problems.
View 5 Replies View RelatedI would like to add some Plugins to PSPPX3, I read/understand i should add the Plug-ins path at Preferences>File Location>Plug-ins - But there is no such option or Preferences>Workspace>Plug-ins - Same story
There was also no Plug-ins map or Workspace map in: C:Program FilesCorelCorel PaintShop Photo ProX3PSPClassicLanguagesNL
I installed PSPPX3 today, and i updated it and downloaded patch 1-4. How / where to install plugins?
When I open a jpeg in X4 it always says it is at 72 dpi. Even when I resize it so it is at 220, when I open it again and look under image information it always says 72 dpi. If I open the same image in any other editor, including X3 it reports the correct dpi. This coupled with the extreme compression is making X4 useless to me unfortunately.
I'm not prepared to sit and do the math to try and figure out what it is really at.
I have reset the number under preferences/general program preferences/units and it doesn't respond to that either.
For me, this version is problematic and not worth taking the time to learn. I need to be able to depend on and trust the information I'm getting from my software.
I normally upgrade every other version. I currently use X2 on a Windows XP computer. My primary uses are photo editing. My key interests are:
- processing 16 bit per color files
- use of layers and blends
- stereo photography (combining and aligning stereo pairs)
- use of various tools such as cloning and healing.
- Color management and Printing
Reviewing the product page, I haven't really found anything that shows a list of upgraded or added features. Most of the things mentioned appear to be in X2 already. Looking at the thread calling for future features, it appears that the things missing are still missing. X2 is serving me well, but there has to be some reason to upgrade?
I have a trial version of PSP X6. I'd like to move and use my workspaces from X5. I've tried everything I can think to do: point to the X5 workspaces folders, copying the X5 workspaces to the X6 folder, adding the X5 folders in the File Locations Preferences, etc.
View 1 Replies View Related