I would like to use paint.net to produce double sided A4 flyers.
Is there a way to produce a 2 page document?
If not - and I have to use a separate file for each page - could you recommend the best way to combine them into a 2 page pdf?
My printer allows double sided printing. I opened two images in PDN and wanted to printed on one piece of paper (on both sides) and I cannot figure out how to this. Both images fit one page.
View 3 Replies View RelatedI'm relatively new to 3d modelling and I'm currently experiencing an issue with regards to double sided materials. I'm attempting to texture the trumpet/ horn section of a gramophone. the final result of the render is really poor and is no where near the desired outcome. I'm not entirely sure if this is due to my render setup, poor modelling or something else.
View 7 Replies View RelatedI need to print a 11x17 brochure double sided. I have a hp laserjet 5500 printer that is capable of duplexing. How do I need to set up my page(s)? Do I use 11x17 size or do I use 11x34 size when I tried 11X34 it shrank it down to fit on one side.
View 2 Replies View RelatedI'm workign on a school project that involves me printing out small double sided tickets. Can anyone offer any help to how I would set this up in PhotoShop so I could drop a sheet in, it would print the tickets on one side, and then i could flip the paper and it would print the back side? With it being lined up?
View 3 Replies View RelatedI'm new and I have been using GIMP 2.6. Is there any possible way to print double sided?
View 1 Replies View RelatedI am designing my Business Card in PS. Now my business card has a back and front...In illustrator I would create two Artboards. What would I do in Photoshop? Do I extend the canvas to double the size? Or do I create a seperate file for the backside?
What is the correct way from a printing perspective?
We have some weird printer issues here and i'm wondering if there is a config option within the print manager to set for simplex or duplex printing. I've looked in programming help and couldn't find anything as well as googling it. Looking for a oDrgPrintMgr.Duplexprinting=NO or something similar.
oDrgPrintMgr.ScaleMode=kPrintFullScale
oDrgPrintMgr.ColorMode=kPrintColorPalette
'oDrgPrintMgr.PaperSize = PaperSizeEnum.kPaperSizeDSheet
oDrgPrintMgr.PrintRange=PrintRangeEnum.kPrintAllSheets
'oDrgPrintMgr.Orientation = kLandscapeOrientation
oDrgPrintMgr.PaperHeight=ActiveSheet.Height
oDrgPrintMgr.PaperWidth=ActiveSheet.Width
I created a really simple missile model in sketchup and imported it into 3dsmax. The flat pollies that make up the fins of the missile only seem to exist from one direction. Do I have to give them thickness or is there a way to make them visible exturable from both sides?
View 1 Replies View RelatedI am using cs5.5 and i can't find any option in the print window to switch double sided printing on/off. The default printer settings on my Mac have already been set up for 1 sided printing.
View 2 Replies View RelatedIn illustrator, when I have two artboards to create a double-sided document, the second one must be upside down for both sides on my print-out to be pointing the same way.Is that normal? and if yes, why this quirk?
View 1 Replies View Relatedi created a double sided greeting card (5x7) portrait and selected email attachment under share tab. The result was two separate files. First file was the front of the card and second file was the inside of the card. Not resembling a card. Is there any way to share a card and have it resemble the actions of a real card. (ie: front of card shows first then by clicking next or open or ?? u see the inside of the card?)
View 1 Replies View RelatedI have CorelDraw Graphics Suite X6. I have created what I want in the end to be a double sided business card. However, when printing I am unable to get what will be the back design to align with the front design. Does Coreldraw have a option of sort to make this happen automatically? Or is there a technique to make this happen?
View 5 Replies View RelatedJoined the recent webinar on X4 and very impressed with the product. I currently use Photoimpact X3 but looking to change to the new product.
How do I import photos of all different sizes and output to a 800 x 600 photo suitable for import to a digital photoframe? In Photoimpact, I set up a new image that is 800 x 600, make changes to the photo (crop, hue, etc), resize so that the minimum ht or wdth is 600 or 800, right click, copy, move to new image, paste, then move the image about until I am happy with the finished photo and save to a file that will subsequently be copied to a USB pen drive.
When I try to add a layer mask either by clicking the icon in layers panel or going layer>add mask I am not getting a usable mask. The layer mask icon in the layers panel is added to the image, but it is still the rectangle with a white circle in it, not an icon with an all white or all black background. Clicking on this icon does not produce a mask to paint, whether white or black. why I am not getting the typical pixel layer mask that can be used to paint and reveal the image beneath?
View 2 Replies View RelatedIs it possible to set up a view in CPaintX5 with identical 'live' versions of an entire image or even just an object with the purpose of being able to work on either version with them set at different zoom levels, for example a 'wide shot' and a 'big close up'. I seem to recall that older versions of PSP had this facility as standard in a toggled pair of floating tabs called Preview and Image Info or some such. (I haven't used PSP for years so I might well be remembering incorrectly). It feels like it should be such a simple thing to do but it is eluding me. Of course it would be of most use as a standard feature of the Cut Out Lab but alas, no.
View 2 Replies View RelatedMy mind is totally blank because I cannot think of a fun and colourful flyer design for a kids clothing store, anyone got an suggestions or something I can look at for a little inspiration?
View 4 Replies View RelatedI'd like to make flyers like the type that you see advertising clubs and rave type events. I can see how I could use photoshop for the background designs but I don't know how to create those eyecatching fonts. Would photoshop alone be enough for this or do I need another program or a plug in?
View 5 Replies View RelatedI have been sorta hooked on doing cooler stuff. Problem is that photoshop is pretty complicated and very intimidating.. I was just wondering if anyone knew of some good (and free or cheap) tutorials that cater specifically to making club flyers.
View 1 Replies View RelatedI am using PS7 to make a website. Have a number of layers done and want to add a long text page Cannot see how. Tried new but that takes me out of that folder, and I want them all together when I upload them.
View 5 Replies View RelatedHow do i set up a template to print 1/4 flyers in illustrator?? i need 4 designs on one 8.5 x 11 size paper??
View 3 Replies View RelatedAll of my fonts on PSP Pro X4 are double-lined and hollow in the middle. How can I fix this so that the fonts are like they should be?
View 3 Replies View RelatedI am trying to make a logo size of 1500 bye 400 when i go to colour it all in black its ok but when i add text its fine then when i go to add photos to it.keeps going on to double size page
I like to have more than 2 photos in the logo
Do I need to change settings as it was working fine for me before as am trying to make logos for my envision free board.
What I'm after in an 'increase photo resolution' tool similar in result to PhotoAcute Studio (without the hefty price tag). I suspect this may be available but named something else.
View 2 Replies View RelatedMy corel x4 was coryupt and I had to install my older Corel 12.
Options on this corel are different. So in Corel 12, how do i change the settings so that when I double click on an image, it will open it in Corel photo for editing?
I have imported a jpeg image by double clicking it and it is showing as a vector in the workspace.All the tools on the left are greyed out(eg clone brush) except for the text tool.On selecting the text tool instead of the usual box showing a blue bar appears on top of the screen which can be moved about.
View 2 Replies View RelatedMaking a logo in gimp.... Yes i'm new to photoshopping etc. ANyway i need to make a double circle and a double triangle
Here is a drawing of my logo: [URL]...
How can Inventor calculate the paint area of a one-side open container with a double bottom?
The container should be painted at the inside and outside.
But not the hollow space between the double bottom and the real bottom?
I am attempting to create a short animation of two asteroids colliding and exploding. I created two spheres with noise and used a bomb to break them apart and added a sphere gizmo for the explosion. Everything is working great, however when I render, the normals are an issue. My asteroid pieces are see though on one side despite checking two-sided in the standard material parameters and checking force two sided on the render options panel.
View 2 Replies View RelatedI just installed 3D Studio Max 2014 and eveything is 2 sided in the viewports, how do I turn this off??
I don't see an option anywhere, but rendering the images shows they are in fact correctly 1 sided. I have checked on several computers so it doesn't seem to be a driver issue.
Everytime i press the shift key and quotation mark key for the double quotation mark to display on my text on PS cs5 doesn't work. It display a double arrow instead.
View 4 Replies View Related