I created a really simple missile model in sketchup and imported it into 3dsmax. The flat pollies that make up the fins of the missile only seem to exist from one direction. Do I have to give them thickness or is there a way to make them visible exturable from both sides?
View 1 RepliesI'm relatively new to 3d modelling and I'm currently experiencing an issue with regards to double sided materials. I'm attempting to texture the trumpet/ horn section of a gramophone. the final result of the render is really poor and is no where near the desired outcome. I'm not entirely sure if this is due to my render setup, poor modelling or something else.
View 7 Replies View RelatedI need to print a 11x17 brochure double sided. I have a hp laserjet 5500 printer that is capable of duplexing. How do I need to set up my page(s)? Do I use 11x17 size or do I use 11x34 size when I tried 11X34 it shrank it down to fit on one side.
View 2 Replies View RelatedI'm workign on a school project that involves me printing out small double sided tickets. Can anyone offer any help to how I would set this up in PhotoShop so I could drop a sheet in, it would print the tickets on one side, and then i could flip the paper and it would print the back side? With it being lined up?
View 3 Replies View RelatedI'm new and I have been using GIMP 2.6. Is there any possible way to print double sided?
View 1 Replies View RelatedMy printer allows double sided printing. I opened two images in PDN and wanted to printed on one piece of paper (on both sides) and I cannot figure out how to this. Both images fit one page.
View 3 Replies View RelatedI would like to use paint.net to produce double sided A4 flyers.
Is there a way to produce a 2 page document?
If not - and I have to use a separate file for each page - could you recommend the best way to combine them into a 2 page pdf?
I am designing my Business Card in PS. Now my business card has a back and front...In illustrator I would create two Artboards. What would I do in Photoshop? Do I extend the canvas to double the size? Or do I create a seperate file for the backside?
What is the correct way from a printing perspective?
We have some weird printer issues here and i'm wondering if there is a config option within the print manager to set for simplex or duplex printing. I've looked in programming help and couldn't find anything as well as googling it. Looking for a oDrgPrintMgr.Duplexprinting=NO or something similar.
oDrgPrintMgr.ScaleMode=kPrintFullScale
oDrgPrintMgr.ColorMode=kPrintColorPalette
'oDrgPrintMgr.PaperSize = PaperSizeEnum.kPaperSizeDSheet
oDrgPrintMgr.PrintRange=PrintRangeEnum.kPrintAllSheets
'oDrgPrintMgr.Orientation = kLandscapeOrientation
oDrgPrintMgr.PaperHeight=ActiveSheet.Height
oDrgPrintMgr.PaperWidth=ActiveSheet.Width
I am using cs5.5 and i can't find any option in the print window to switch double sided printing on/off. The default printer settings on my Mac have already been set up for 1 sided printing.
View 2 Replies View RelatedIn illustrator, when I have two artboards to create a double-sided document, the second one must be upside down for both sides on my print-out to be pointing the same way.Is that normal? and if yes, why this quirk?
View 1 Replies View Relatedi created a double sided greeting card (5x7) portrait and selected email attachment under share tab. The result was two separate files. First file was the front of the card and second file was the inside of the card. Not resembling a card. Is there any way to share a card and have it resemble the actions of a real card. (ie: front of card shows first then by clicking next or open or ?? u see the inside of the card?)
View 1 Replies View RelatedI have CorelDraw Graphics Suite X6. I have created what I want in the end to be a double sided business card. However, when printing I am unable to get what will be the back design to align with the front design. Does Coreldraw have a option of sort to make this happen automatically? Or is there a technique to make this happen?
View 5 Replies View RelatedHow can i make this chair part nurbs or poly modeling?
View 4 Replies View RelatedAny chance I can make an Image Plane behave like a one-sided display? Like sort of a Backface Culling option for Image Planes?
View 2 Replies View Relatedcan make a design with as few polygons.
View 3 Replies View RelatedI'm using 3dsMax 2010.
I have created a big spline. When I tried to "Convert to poly", it doesn't work. Usually, as result, the spline appears with a filled. In my case, the spline disappears. I thought it might be because the spline is not closed, but it is correct.
I'm trying to model glasses. I have completed the frame and the handle. They are different parts of the 3D object. [URL] ...
Now I would like to connect them together. I tried to choose some vertixes and use cap poly tool to cap them. But it doesn't work: [URL] ....
Then I tried to move those vertixes close to each other and use the weld tool but it doesn't work either.
I have had many problems connecting different objects together with cap poly and weld vertixes tools in the past and now I would like to know is this a bug or what I'm doing wrong?
I'm new to 3DS Max and am coming from C4D. How do I separate a poly from an object into its own object?
I have a box which I want to convert all 6 sides/polys to their own object.
so this is the most annoying thing ever. I have a subdiv. i turned it to a poly (to get rid of the bloody shell in render view, i dont even know why its showing) when i did this previously, the shell went away when it became a poly, now its not. I'm new to how subdiv's work so am i missing something?
View 1 Replies View Relatedis there any way to convert a bunch of splines into a poly? Its going to be a city, the shape is given. I need it as a poly, now its just a bunch of splines.
View 8 Replies View RelatedI cant solve this problem with edge selection tool, my task is to create an oil barrel and when I select the barrel with edge selection tool then press setting button next to connect there is that triangle pattern in between two lines that I don't want, how do I get rid of it?
View 7 Replies View RelatedI've been working on a tyre for a while. Now i need to model the side wall with some text on it. Because the tyre has to be printed in 3d i need this text as polygons in the model (not in a texture). So what is the best way to get a 3d text on my poly? It's very important to get an valid editable poly (from each vertice start 4 edges / an edge don't has 1 face on on side and 2 on the other ...).
View 3 Replies View RelatedIs there a way to conform an object (with a thickness) to an editable poly surface, like you can with patch deform to a patch surface ? I know you can use the compound object 'conform', but that does not give the result I'm looking for.
I was hoping that is was possible to simply convert an editable poly surface to a patch surface, but then I just get "illegal surface" when I pick the deform surface.
Patch deform is great, but almost worthless if I can't use it for editable poly objects...
I was modeling a unicorn in ZBrush (because it's so comfortable and intuitive with modeling) for a film in a project of my studies and imported it to 3ds Max then, because I know how to rig and animate there (and in ZBrush I didn't even find out how to MOVE an object).
After a while I finally killed all the triangles in my mesh, but it's just... horrible. So many polys where they aren't needed, so unclean. It looks like this:
[URL]..........
And I'd rather want it to be clean like that:
[URL].......
i have failed to convert this polygon to sub div. I have tried all cleaning options but it still wont convert. scene is attached. the error message i get is this
deleteInternalValence2Verts |body1|body1Shape;
polyToSubdiv -ap 0 -ch off -aut on -maxPolyCount 100000 -maxEdgesPerVert 40 |body1|body1Shape;
// Warning: Nothing is selected. Select objects or components to delete. //
// Error: Command polyToSubdiv failed. Open Script Editor for details. //
scene file can be found here [URL]......
I made a staircase rail made out of splines etc...
Converted the object to edit poly and duplicated + attached all the piece.
So I have this one object that is really long and this is the rail of the whole staircase.
Now I created a spline and once I select the object and add a Path Deform, the object isn't rotating correctly along the spline. At the beginning of the spline its @ 90 degrees and further down it starts to spin.
How do I make it so it's always 90 degrees to the ground?
Pic included
When i try to convert Poly to Subdiv I get this message in script editor:
polyToSubdiv -ap 0 -ch off -aut on -maxPolyCount 1500 -maxEdgesPerVert 32 |polySurface8|polySurfaceShape9;
// Warning: Nothing is selected. Select objects or components to delete. //
// Error: Command polyToSubdiv failed. Open Script Editor for details. //
It is strange, because I fixed all non-quad faces. I also tried all cleaning options with no success.
how can i reduce the poly count of a static mesh I made. I am attaching a screen shot of it. Rather than re-modelling the mesh or re-topologizing what can i do to reduce the poly count??
View 2 Replies View RelatedI'm used to being able to select and hide polygons while creating models in programs like Lightwave and Modo. It is an essential function that I can't imagine Maya lacks, yet there isn't an obvious way to do this as far as I can tell. Is there a workaround?
View 5 Replies View RelatedWe've had to re-image machines, so it's been a few days of trouble shooting new issues with re-install of Maya2012.
Installed SP2 for Vista yesterday in hopes some of the modeling issues would be fixed. But still having two issues.
The worst is each time I try to cut faces my faces in sections of model disappear. The face is there and it's closed. If I re-launch Maya then the display is correct.
The last but less of a nuisance at this time is a white display during view port changes. Didn't have this issue before. But all of our machines here on the team are doing the same thing.