3ds Max Modeling :: Converted The Object To Edit Poly
Jul 17, 2011
I made a staircase rail made out of splines etc...
Converted the object to edit poly and duplicated + attached all the piece.
So I have this one object that is really long and this is the rail of the whole staircase.
Now I created a spline and once I select the object and add a Path Deform, the object isn't rotating correctly along the spline. At the beginning of the spline its @ 90 degrees and further down it starts to spin.
How do I make it so it's always 90 degrees to the ground?
Whenever I try to collapse a group of edges in Edit Poly mode there is always 1 edge that is left intact therefore creating undesired results. This doesn't happen in Edit Mesh mode, and also behaves accordingly in previous versions of Max.
Currently using Autodesk® 3ds Max® 2014 Version 16.0 commercial
I don't know what is going on but it is getting on my nerves. I created an OBJ file for my Glock model that I'm working on and re-imported it into 3ds Max to remove any five sided polygons. 3ds Max fixes them automatically this way. This fixed model won't export as an editable mesh, it gets stuck on "preparing polymesh for poly export" and I have to ctrl/alt/del to shut the program down. After some research, a few boards say to change the mesh to a poly. Tried that and I have random black polygons appear and I don't know what to do to fix it. I've attached both the file and an image to this post. The glock on the left is my original model and the one on the right is the OBJ I imported to have four sided polys throughout.
In mesh edit mode, when you assign a material to the selection, it works as expected, it assigns the material only to what is selected, for example, a face.
In poly edit mode, it works differently, if you try the same approach it assigns the material to the entire object and you have to deal with multi-materials and material IDs to achieve that, what is very boring and totally unintuitive imho. Is there an option to make the poly editing mode work like the mesh editing mode, or at least another way to achieve the same result in a intuitive or at least 'visual' fashion?
I found to model a joystick. I have created a spline mesh, and applied a Surface modifier. The next step is to convert it to an Editable Poly. Fine, no sweat there. The thing is, when i do that, Max creates a ton more vertices; so many that its blatant over kill. My Surface mesh contains only 214 verts, but after conversion, i have over 6000.
Im guessing its adding some kind of smoothing somewhere...? After conversion, the tutorial has no more verts than it did before conversion, and it looks pretty much the same.
Conversion does not add extra vertices?
Intel I7 3.8Ghz, 8GB DDR3, SSD, nVidia 460, Windows 7 Ultimate x64 3DS Max 2011 Hotfix 4 x64
I was trying to play around with the software to get to know it, and... well, I think I made something weird in it. Everything was flowing nicely when I was following the tutorial about Editing Objects: I created a box, I selected that edit poly option from the modify tab and I could edit vertices totally nicely.
But then, I really don't know what happened, but, I don't know exactly when, I suddenly could not move the vertices AT ALL. They are pretty visible, but when I select them, they turn red and the axis are not editable! I'm so confused! I can edit the axis very normally if I'm using an option like Select and Move but... With the edit poly thing I just cannot! I tried everything I thought of: Made a new box, restarted the program, restarted the PC! But NOTHING worked.
EDIT: It took me almost an hour to figure out I wasn’t selecting the Select and Move tool!
I have created a big spline. When I tried to "Convert to poly", it doesn't work. Usually, as result, the spline appears with a filled. In my case, the spline disappears. I thought it might be because the spline is not closed, but it is correct.
I'm trying to model glasses. I have completed the frame and the handle. They are different parts of the 3D object. [URL] ...
Now I would like to connect them together. I tried to choose some vertixes and use cap poly tool to cap them. But it doesn't work: [URL] ....
Then I tried to move those vertixes close to each other and use the weld tool but it doesn't work either.
I have had many problems connecting different objects together with cap poly and weld vertixes tools in the past and now I would like to know is this a bug or what I'm doing wrong?
so this is the most annoying thing ever. I have a subdiv. i turned it to a poly (to get rid of the bloody shell in render view, i dont even know why its showing) when i did this previously, the shell went away when it became a poly, now its not. I'm new to how subdiv's work so am i missing something?
is there any way to convert a bunch of splines into a poly? Its going to be a city, the shape is given. I need it as a poly, now its just a bunch of splines.
I cant solve this problem with edge selection tool, my task is to create an oil barrel and when I select the barrel with edge selection tool then press setting button next to connect there is that triangle pattern in between two lines that I don't want, how do I get rid of it?
I've been working on a tyre for a while. Now i need to model the side wall with some text on it. Because the tyre has to be printed in 3d i need this text as polygons in the model (not in a texture). So what is the best way to get a 3d text on my poly? It's very important to get an valid editable poly (from each vertice start 4 edges / an edge don't has 1 face on on side and 2 on the other ...).
Is there a way to conform an object (with a thickness) to an editable poly surface, like you can with patch deform to a patch surface ? I know you can use the compound object 'conform', but that does not give the result I'm looking for.
I was hoping that is was possible to simply convert an editable poly surface to a patch surface, but then I just get "illegal surface" when I pick the deform surface.
Patch deform is great, but almost worthless if I can't use it for editable poly objects...
I was modeling a unicorn in ZBrush (because it's so comfortable and intuitive with modeling) for a film in a project of my studies and imported it to 3ds Max then, because I know how to rig and animate there (and in ZBrush I didn't even find out how to MOVE an object).
After a while I finally killed all the triangles in my mesh, but it's just... horrible. So many polys where they aren't needed, so unclean. It looks like this:
i have failed to convert this polygon to sub div. I have tried all cleaning options but it still wont convert. scene is attached. the error message i get is this
deleteInternalValence2Verts |body1|body1Shape; polyToSubdiv -ap 0 -ch off -aut on -maxPolyCount 100000 -maxEdgesPerVert 40 |body1|body1Shape; // Warning: Nothing is selected. Select objects or components to delete. // // Error: Command polyToSubdiv failed. Open Script Editor for details. //
When i try to convert Poly to Subdiv I get this message in script editor:
polyToSubdiv -ap 0 -ch off -aut on -maxPolyCount 1500 -maxEdgesPerVert 32 |polySurface8|polySurfaceShape9; // Warning: Nothing is selected. Select objects or components to delete. // // Error: Command polyToSubdiv failed. Open Script Editor for details. //
It is strange, because I fixed all non-quad faces. I also tried all cleaning options with no success.
I created a really simple missile model in sketchup and imported it into 3dsmax. The flat pollies that make up the fins of the missile only seem to exist from one direction. Do I have to give them thickness or is there a way to make them visible exturable from both sides?
how can i reduce the poly count of a static mesh I made. I am attaching a screen shot of it. Rather than re-modelling the mesh or re-topologizing what can i do to reduce the poly count??
I'm used to being able to select and hide polygons while creating models in programs like Lightwave and Modo. It is an essential function that I can't imagine Maya lacks, yet there isn't an obvious way to do this as far as I can tell. Is there a workaround?
We've had to re-image machines, so it's been a few days of trouble shooting new issues with re-install of Maya2012.
Installed SP2 for Vista yesterday in hopes some of the modeling issues would be fixed. But still having two issues.
The worst is each time I try to cut faces my faces in sections of model disappear. The face is there and it's closed. If I re-launch Maya then the display is correct.
The last but less of a nuisance at this time is a white display during view port changes. Didn't have this issue before. But all of our machines here on the team are doing the same thing.
Maya 2012 64bit, Win7..I can not convert a polygonal model to subdivision with proxy (command failed),do not see error description in the script editor. What typical problems of convertation (poly->subdiv) do you know ?
I want to Boolean text onto a PolyPipe I made. Let me include a pic for reference.
Like I said, i built the "ring" with a Polygon Pipe turned 90 degrees. Then I created 3D text. but I do not know how to "bend" the text so that I can move it over part of the ring and Boolean it through.
I'm trying to update an old drawing that has been a part of my military organization for decades that was originally drawn on some old paper.
I am currently using Maya 2012 Student Version and am having trouble when extruding edges. When I click 'extrude' many of my polys disappear. I will attach some screen shots.
I would like to make a star shape - but I need lots of verts and faces - I know how to make one with splines but when I extrude it there is not enough geometry in the face to do what I need to. Basically I'm wanting to create a rather beat up/bent in places sheet metal star.
I know that I can just manually move the vertices around or use FFD (4X4X4). So far the two previous methods seem to be the best but I want it to be a little more natural and not manually dented by the hand of man. I'm working on a few sort of apocalyptic designs, buildings put together by corrugated dented metal and such.
I created a very simple two poly object and then deleted my construction history and now I cannot seem to create a new polygon in the scene unless I turn off interactive creation.
If I choose create>sphere etc the little sign that says drag on grid appears but when I do nothing happens. I made a new scene and did the same thing and I don't have the same problem so Im not sure why in this particular scene.
Is there a way to make an editable mesh or poly somewhat transparent when a material is applied? Think of the material being a thin cloth such as nylon. You can't see directly through it, but it isn't like a thick material such as jeans etc. I also want to make this object deform like a balloon inflating, so I don't know if that will cause issues with transparency.
