I have a photo and need to blur/distort out a face. When I use one of the blurs or distorts it does the whole photo. If I use the elliptical thingie it just makes the ellipse, but I don't know how to apply the blur to that spot.
View 8 RepliesIn FX what plugin do I use? I remember seeing it but cant find it.
View 2 Replies View RelatedI am using VSP X4. In trying to blur or pixelate a face in a video, I first copied the video from the main track onto the overlay track. I then added crop and with keyframes followed the face. I then added the pixelate filter and adjusted. It seems no matter how I adjust the pixelate sliders, the finished product is a very minimal blur and you can still identify the person (I am using a video of me for practice). I have left trancparency at zero in the Mask and Chroma key section.
On the same topic, is there a way to hide the face with color rather than pixelate?
I cannot figure out how to distort text into a curve to achieve a similar result to this Lucasfilm logo:
Hopefully I haven't overlooked a tutorial here somewhere - I've searched but not found anything. I'm guessing this'll have a really basic solution that I've missed completely...
I was wondering, is there a way to take a rectangular object and constrain it to a circle?
Two restrictions:
No using Shape3D
No using the circle selector. I'm not asking about cropping an image. I want to distort it so that it is a circle.
But I only have (can only afford) the Photo Net free Version 3.3x, 3.5.I have a photo, say 2000 x 1500 px. But it is distorted. It looks like the two people in it have 25-inch legs. So I need to select the bottom half (rectangle select)
- and "stretch" that selection (not the whole image) from 1000 x 1500 px to 1250 x 1500 px!
The revised image with therefore be 2250 x 1500 px.
- but it will no longer be distorted
- and will include all the data in the opriginal photo.
All Serif PhotoPlus does is:-
- stretches the selected rectangle
- but keeps the same 2000 x 1500 dimensions
- simply by cropping off the bottom 200 or so pixels. This is not what I want. instead, whether or not Photo Net Version 3.3x, 3.5 is capable of resizing / changing the dimensions of a selected part of an image, i.e. stretching it along one axis?
It will really get me out of a hole that could never have been envisaged for such a simple, routine photographic requirement.
I don't know how to do an edge blur. basically I have a smokey cloud in the background and a picture in front of it. i want the edges of the picture in front to be blurred so it appears to be all one picture.
[attachment=0]tss.jpg[/attachment]
Attached Images
I am new to Paint.net and I didn't find the Blur Tool (with a water drop icon).Is there a plug-in to add it the the tool menu?
View 3 Replies View RelatedI just downloaded paint.net and I'm making a icon for my youtube channel. I'm usually good when it comes to photoshop (i had it for years, it recently was uninstalled by mistake and I couldn't be bothered re-downloading it) but I cant seem to find out how to do something.
I'm trying to colour the blur behind the text (the layer under layer 5) but I've tried making a new layer, colouring green over it and using overlay, that failed. I've check multiple tutorials, but nothing is working.
The Median Blur effect is suppose to be available with PdN V3.0Alpha3+.
How in the world can I get this into my PainNet program?
I edit allot of sports photos and I would like to get to be able to use the Motion blur effect. I know Paint.net has the motion blur effect but I have a hard time just blurring the parts of the photo I want. Is there anyway I can get a better selecting tool?
View 2 Replies View RelatedI can't find median blur. is that in a plugin? I wanna do this tutorial but cant i think they done away with median blur idk. Can you update this?
View 19 Replies View RelatedWorking on a header. I would like the background of the header to be blurred (gaussian blur). How to do this or post a link to a guide? If so, do I need any plugins?
View 2 Replies View RelatedHow do you blur something in an image without blurring the whole picture?
View 2 Replies View RelatedI am wondering why the gradients that paint.net generate look so dull, and i've experimented with creating the gradient by just filling two colors and then applying gaussian blur. Is there a reason why the gradient looks dull? and is there already a tool for creating a gradient like a gaussian blur provides?
it looks like the gradient tool creates a lot of "in between" color, in my example gray. I've attached an example. The gradient is on the left, gaussian blur on the right.
Attached Thumbnails
I want to blur or fade just one side of a picture to blend into a new header image.
I don't want the picture to look as if it has just been stuck on top of the background....It must look as if it's an integral part of the background.... the picture has a very defined, dark "hard" edge . And I would like to "soften" it ....is that possible?
What techniques are available to integrate a picture into a header background?
I have an image with some text in it, however the text is quite blur. How can I make the text clearer so that the text is readable?
View 3 Replies View RelatedI'm learning how to use a Gaussian blur mask to airbrush portraits, but one issue I keep running into is that whenever I paint close to a colour other than skin (e.g., glasses, hair, shirt) then the paintbrush picks up that colour and paints it on the skin. Even when I try a very small diameter of brush or increase the hardness to 100%, it still shows up. I'm not sure what I'm doing wrong.
View 5 Replies View RelatedCan I use a brush to apply gautasian blur? I have paint shop pro x6.
View 6 Replies View Relatedhow to blur the images for a client website..What I have done is to take 2 images and put them alongside each other, but I need to blur the area where they join to make the join look less severe.Also, I need to blur the complete outer edge of the whole image as well.
View 13 Replies View RelatedI need to know how I can crop a face out of/from an image.I only need the face by itself.
View 1 Replies View RelatedI am trying to get a blur effect (Gaussian) on a vector image, and it is not allowing it to happen. It appears that it will only affect bitmap images. Is this true, or can I actually do the effect as I want?
View 6 Replies View RelatedWhy not allow paint.net to have the feature of blending pictures in order to create motion blur as it is was in 3d space.
View 2 Replies View RelatedI have some random curves (already created) and I want to blur them just from one side to have the same blur distance and effect one the whole curve.
To more precisely describe what I need, I need to create gradient with direction of normal for every "point". The best example I have found so far are borders in Civilization IV game. Here are two examples:
3.bp.blogspot.com/-40x9Kw5vrrA/TiHjTNwOuQI/AAAAAAAAADA/uw2NeAnsmOk/s1600/Civ4ScreenShot0008.JPG
apolyton.net/civ4/files/info-images/agade.png
As you can see, there is a solid curve, which gradually blends (i.e. alpha channel is lowered) till the gradient disappears. I have the solid curve and the question is, what would be the simplest way how to do this (the number of curves is around 100) gradient.
I just got PSE CS6 and the blur too will NOT work ....blur filters work, but not BLUR in the tools panel I have tried: unintstall/reinstall, updating, using it no a picture straight after opening it, duplicate layers, selecting an area and then blurring....flattening an image, every single different setting in the the blur tools menu bar NOTHING works. And everything I find about blur is the new blur filters....
View 1 Replies View RelatedI have been obsessed with this effect, but have never been able to manage it (at least not on pictures of me). Apparently it's not a secret, because people have figured it out, like in these two album covers I have attached. (Fallen by Evanescence and Burlesque) Now, I also realize it's possible that Photoshop may be the only program that can achieve this (with the masking tool maybe?) and Paint.net can't. I just need to know these things. It's difficult for me to attempt, how to phrase my question without photos.
View 1 Replies View RelatedI'm looking for a function that lets me take a rectangular face viewed from an oblique angle, and square it up as if I were looking straight at it.
For example (can't draw pictures to show you what I mean), suppose I take a photo of an apartment building while I'm standing across the street and off to one side. I need a tool that lets me click on the four corners of the building's face and un-distorts the face, making it rectangular.
I have used a non-PDN tool (GIMP? Photoshop?) that had this capability. We used it to model the buildings at [URL] .... from actual photos.
Now I'd like to do this with PDN. I read about Evan Olds' Quadrilateral Reshaping and dpy's Perspective Effect. I've installed both plug-ins, and while they can do the trick with a little nudging, they're not exactly what I'm looking for.
I want to add a pair of sunglasses to a painting of Shakespeare and I have no clue how. Any tips/tutorials?
View 11 Replies View Relatedi have outlined this pic and used the Gaussian blur , but how would i soften the edges of the blur so it doesnt look so "sharp"? I want it to kinda blend in so to say here is the pic.
View 7 Replies View RelatedHow to remove shine from the face in photos?
View 4 Replies View RelatedWhen you try to select a human face (and maybe body) from a complicated background then seperate it. You'd end up with this face having small parts coming off its edges (ends). You might try to use the eraser to some extent. Still the face or body will not look smooth. How to smooth it?
View 1 Replies View Related