While using a word, is there a way to write text using different colors within the same word ? When I attempt to change the color, it changes the color of the whole text.
E.g. I want to write a word like this :
TEXT EFFECTS
im using corel x6 on win7 x64 i have some critcal issue on some arabic fonts spacially word ALLAH (الله) when im writing Word ALLAH in Arabic its disapears.
View 1 Replies View RelatedI am just writing my math book on Corel Draw and unfortunately I could not import correctly all the information from Word, this because all those formulas which I have done in Word using the equation editor could not be transferred to Corel Draw. "How can I transfer all the math formulas written in Word to Corel Draw?"
View 4 Replies View Relatedive got paintshop pro x5 ultimate i want to write in flames but need a flame pic tube its not in the verion ive got can you get it from any where else and can i have a link if youve got it
View 2 Replies View RelatedI am trying to blend the wording above on the photo into the photo, so it doesnt interfere with the pic, and you can see the pic as well, without losing the quality of the font and writing too.IS this possible?
View 4 Replies View RelatedI have a vacation picture that is on a beach. I want to make it look like there are some words or designs drawn into the beach.
How can I do that? I don't work in Photo Paint to much. I do most of my work in Draw since I deal with vector images 90% of the time.
I am trying to write some text onto the screen, and it is invisible. No matter what colour I have the text and/or background, it comes up invisible.
View 2 Replies View RelatedI recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
How do I change the color of the text when I want to write on a photo?
View 3 Replies View RelatedI created my first project that consists of 4 layers and saved it! However, when I tried to paste it into a Word doc only the background layer (a photo) shows up without the other 3 layers containing writing.
View 2 Replies View RelatedI use Paint.Net a lot to create images for Word. So I save in .jpg org .png. And everytime I save my work (which contains layers), Paint.Net asks if I want to flatten it.
Add an "Remeber my selection" check-box, or auto-flatten the image. I think, after seeing that dialog-box for 100x times, you know that there will be no layers afterwards.
Alternatively, you could add a command "Save As Copy..." which doesn't ask for flattening, and will not change the currently active image. (This solution would not require you internally keep track of the user choices.)
it's possible to copy and paste form Word and keep the formatting. I've tired using the text tool but the formatting is lost and I've tried direct pasting but it results in a huge size. Resizing the result leaves the print blurry.
I'm trying to add formatted text to an image size of 490 x 680.
I have a number of textures of marble, stone, rock... much of which I use in construction projects within Second Life where I am a Builder.
I have a small project in the works to produce a stone structure; that has some text engraved into the stone. I have the text typed up in MS Word. But when I copy/paste that into Paint.net; there is no left/right/center alignment; and the text has no 'word wrap'... it just pastes it all as one single reeealllllly long single spaced line... like there is no bounding box to contain it. Further more, I am not sure how I could make it appear as though it were 'engraved' ...
Now I do know how to make/add Layers... I use Paint.net often to manipulate many of my existing Second Life textures that I buy from within Second Life, and upload onto my computer to 'tweak' them. Sometimes I'll add an alpha transparency layer of Spanish Moss to a Stone Wall, for example, then re-upload that back into SL.. and I now have a building with stone walls, and spanish moss hanging over the walls to give it more unique look.
I know I can create a "layer" of Text, that can then be added over a stone or marble texture image...But I can't figure out how to get that text to wrap or center, or appear engraved
How would I acquire these features, is there a plugin that does all this for text?
I have just purchased this upgrade software having used XARA Xtreme4.0 for many years.How can I change the black background screen with white writing to grey with black writing?
View 9 Replies View RelatedHow can you changed the text editor to a word processor like word?
View 1 Replies View RelatedI have just joined and installed Paint.net earlier this week.
Well my title is what it says, I got a picture from a website via Screenshot/Screenprint and it will not save in your picture app feature, it keeps saving as a word app which I had first printed the Screenshot/Screenprint to.
Would I be better Screenshot/Screenprinting direct from the webpage, I wouldn't want to lose this perfect picture.
How to export the .dwg file to Microsoft WORD as a base/background for further word processing on top? Is there any direct way to convert the file that can use in WORD?
View 1 Replies View RelatedRecently, had to stop using Corel PhotoImpact, since Corel stopped supporting it. Switched to PaintShop Pro X4
Running Win 7 64 bit, Office 2007
I have to repeatedly copy and paste from PaintShop Pro X4 into Word 2007.
When I choose the default paste, the pictures are fuzzy in Word
1) this is not a problem with other programs, such as Irfranview, as the source, instead of PaintShop Pro X4.
2) if choose "Paste Special" in Word-->bitmap, pictures are sharp. It is the default paste that is the problem.
3) I do not want to have to use "Paste Special" all the time
This is rather odd, to say the least. Why should the same image captured by the Windows clipboard from PaintShop Pro X4 vs Irfranview behave differently when pasted into Word 2007?
1. How can a PDF document be converted to a Microsoft Word document. I just want images and text.
2. How can the images be converted to grayscale.
PS: I want to convert, modify and then print the AfterShotPro manual which downloads in PDF format.
Losing image quality after adding layer and inserting into MS WORD.
View 6 Replies View RelatedI accidently exited out of my color changing tool bar thing and now I can't change colors. How do i open up the colors again?
View 1 Replies View RelatedI created a 8-bit .bmp file which shows 257 (=2^8+1) colors in Windows Picture Viewer. The image shows a black frame with 256 different red colors inside. You may load it with Paint.Net and count the colors. ;-)
You can get the image here 8-bit bitmap showing 257 colors.bmp
What i would like to do is add a background texture to an image that already has color without the texture pictures color taking over, how can this be done?
I am using an apply texture plugin, but once again it applies the texture and the color of the picture , all i want is the texture.
How to mix colors in Photoshop like you would mix colors in real life to get that "in between" look. I have tried smudging and blending options but could not find anything. Here are some pictures of what I am looking for.
View 8 Replies View Relatedhow would you go about changing the color of cars?
View 2 Replies View RelatedWhen I put orange gabriola font, 144 size, Bold effect on a canvas--and then try to make it 3-D by adding white. The white is smaller --not the same size as the orange--yet everything else is the same!
I tried measuring them together by putting the white behind the orange (it is smaller!) by going back to a file I'd resized before making the white (in case I did) --same thing. Made new layer, duplicate layer, put the active layer below, above..nothing would make them the same size!
Not that the actual letters are so badly different is size, but the spacing appears to be wider in the orange than in the white--which means that the white doesn't fit on the orange.
I need to get my manuscript published. And after all I've had to do to learn to get as far as I have, I sure don't feel like having to repeat if for one contrary white font!
I would like to acheive this:
Is it possible to have some kind of calc mode or another technique that would allow me to have an object that I could move around without having to "magic wound->recolor" each time?
I want to be able to change colors across my entire image. Kind of like the bucket tool when it is on universal, but with a few changes. It would be able to change dark red into dark blue and also light red into light blue at the same time when the tool is used. It would scale based on the lightness of the color throughout the entire image.
I could basically choose blue, click on any red part with the tool, and then every red color (with a certain tolerance) would change into blues of the same lightness and darkness as red. I was thinking that this would be useful for changing the colors of objects that have certain shading effects or shadows in them.
I am trying to blend certain portions of an image where I have done some cut and paste work. I have tried many effects and plugins, but have yet to find a fairly seamless solution (yes I have tried Seamless Texture maker).
I have attached a part of the pic where you can see my copy and paste issues. A
What does the magic wand tool do on PAINT.NET. I need to know What it is for b4 I can follow the instructions referring to me doing something I have no clue about, since I can not be doing it, as I do not know what the function of this tool is. 6 words (or 10) or less?
Or what has happened to the once great function on Adobe software called smudge? Unless I was dreaming, this was a simple function that would allow one to rub two different colored or shaded areas together, to blend them subtly into one color. This allowed one to blend a color or fix a big flaw, with out days of screwing around fixing 1000s of pixels one by one. I am trying to take the shadow out of the background in a picture, I just need to blend the two colors of white together to get rid of the shadow.
Also, why is crop command gone on my paint.net? It will not work. It is there, but it is lite (gone) and will not work.
It's been a while since being on PDN and I can't find the tutorial where you have different colors scrolling horizontal or vertical within the text. Think you created a .gif file to do this.
View 7 Replies View Related
