I am trying to make an animation for a school project. It is a stickman animation, and I want to move a characters legs without deselecting him. However, I also want to save the image at the same time(to put in Movie Maker). Is there a plugin for this? Or do I have to go through the process of constantly redrawing stickman?
View 2 Replies
It's a problem occurring frequently If the contents of a specific layer is comprised of thin, short or small objects, brush strokes etc. and I need to move them.
When I try to select them (in order to move them), many times the mouse goes a little to the side of the objects (because they're so thin/small) and clicks on the object(s) on the layer beneath. This also has the unwanted side-effect of automatically deselecting the current layer.
Isn't it possible, once a layer is selected, to click and drag anywhere on the canvas to move its contents without deselecting it, like in Photoshop?
If i want to make 10 even horizontal selections of my picture, how can i do this?
For instance, if my image is 800x1000, i want 10 even slices to be 800x100...
I'm trying to take a particular image out of my picture to use as a logo and be able to put it on business materials. I'm not having any luck with it.
View 5 Replies View RelatedHow do I take background out of picture? I am making a flyer and only want to focus on the item I am selling. Using Elements 11
View 1 Replies View RelatedI have a picture of a man that i deleted its background using the magic wand. I chose the background with the best tolerance that i can and push "delete" button. his deleted the background.
But when i put that man on another dark background, i can see a very thin white line around the man, like it was "cut" from another image (which is true...) how do i get rid of this white line around him?
I tried to focus and delete it manually but it is an endless work. I attached the image, do you see the white stripe around the man?
Attached Thumbnails
I've been averaging about 10-15 seconds from clicking on a pic until the program opens and the pic is displayed. Today a .jpg (272KB) took 26 seconds from clicking the pic to PSP opening and displaying it.
I have everything disabled in startup and all non Microsoft services except Protexis unchecked.
PSP ProX4 was just purchased and installed last week and has the latest patch.
Intel 2600K @ 4.5Ghz/8Gb RAM/1Tb main HDD/Asus Radeon 5870/Asus P8P67 Deluxe mobo.
Why is PaintShop Pro X4 so crazy slow to open?
i'm making a map showing arid areas, dry areas, plain, mountains. i'm using the live paint bucket function with great difficulty. i'm using this for first tim, i have almost zero experience in illustrator . i'm stuck now. the greean area on the left can't be isolated out, or lets say cut paste as a new individual shape. I'm using illustrator cs5
[URL]
I'm just working on a flyer for a party and I like how the picture looks like after clicking on the picture with the magic wand.Now the question if I can save that picture with that looking someway?
I could use the print button, yes but then I lose the quality of the pic.
you could copy the layer from picture 1 to picture 2.
So you coud copy whole "effect-strings" much easier as before.
Is there a chance to implement this feature to P.net?
I downloaded the free CS2 version from the Adobe website.
I am trying to create a watermark for my images.
I have followed several tutorials to a point where I am ready to crop my watermark and set as a defined brush.
I select the crop tool, and go to select the text and the text disappears. If I go ahead and retry to select an area...then the crop tool actually works, but my text is gone.
The other thing is, my text is in what I would describe as a "free selection lasso" meaning the text isnt in bold, but rather has a floating edge around it.
Often I will have a complicated path that took a long time to make, only to lose it by selecting another tool. How can I restore a path after this happens? The undo function does not restore paths.
Also, is there a way so transform (scale, rotate, etc) a path? I know I could turn it onto a selection first, but I usually need to edit the path itself afterwards.
I'm getting the hang of tool "o" & tool "shift o". After I make this selection, is there a way to deselect only part of it?
Especially when the part is not connected to the rest of the selection.
I use [k] to get me into local adjustments, and [z] to zoom in, how I can pan around without deselecting the local adjustments (which loses which local adjustment I have selected). I tried [fn]+[arrow key] without any luck. This is very disruptive for me.
retina MBP + OS X 10.8 + LR4.1
We just installed AutoCAD P&ID 2013 and there is a HUGE problem with deselecting. This problem is not just on one computer, it is a systemic issue in P&ID 2013.
View 5 Replies View RelatedI am having an issue that appeared this morning when I woke up and turned my computer on... My AutoCAD 2012 (full) is locking up on certain things:
-When I select something without a command on (free selecting) it selects the items fine, but when I press the ESCAPE button to deselect everything there is a 1-2 second pause and then it deselects everything, instead of it instantly happening as it did for the past, oh I dunno, 10 years.
-If I select the items then type the command, normally it would instantly start that command with the items I had selected. Now, after selection items, when I type the command, it pauses for 1-2 seconds and the runs the command as usual.
-I am trying to edit an AutoCAD table, normally this is as smooth as butter. Now, not only are the same issues mentioned above happening, when I go to edit a cell, the typing has a 1-2 second delay and then starts. Once I start editing one box, it will move to the next cell smoothly. But if I click outside the box to end editing, there is a 1-2 second pause.
Last night, I randomly thought, "Oh, I'll run my McAfee virus scan because I haven't for a long time", literally I don't remember the last time I ran that. I also thought, "Oh, I might as well run the Dell PC Checkup scan", this is a factory program that came on the computer that again, I can not remember the lst time this was ran. Both scans went through Full Scans and found ZERO issues. The PC Checkup found one issue on an external hard drive that I use for BACK UP ONLY, I was not concerned with this because I figured it was either just an issue in the connection or between the 2 softwares. Also I wasn't concerned with it because if it does fail, it's a backup drive only anyway, so I'd just replace it.
Multiple objects are selected, I hold shif and cross-window over objects from right to left, I expect everything I cross to be deselceted. I my testing only one item is deselected.
Is there a variable I am forgetting about here or is something a miss?
After I position a crop on an image it keeps moving up, to the top of the image, after I deselect the image. I did use the upright functionality at first but turn it of to do it manually. Maybe this feature has left some settings in the LR develop settings for this image. I could post some screenshots if that will work.
View 29 Replies View RelatedI'm having troubles using Photoshop CS6 (64-bit) on Windows 7 (x64). After deselecting the move tool, or any tool that has move capabilities, such as the various transform tools, Photoshop crashes to the desktop.
I have reset all preferences by holding CTRL + ALT + SHIFT while starting Photoshop and by manually deleting the preferences files. I've also tried uninstalling and reinstalling Photoshop in its entirety. These attempts to solve the issue didn't change anything regarding the crashing. I am using the latest drivers for my graphics cards.
I have some lines/plines..Pedit - J, then select my line and once I select the second one the first (last) selection is deselected. I cannot find the answer to this myself on google on here, i'm starting to get paranoid at my in ability to recall any of my AutoCAD working memory.
View 5 Replies View Relatedi'm use to using the shift key to deselect something. it doesn't seem to be working when i select a whole bunch of lines
View 3 Replies View RelatedBeing new to AI, I find that as I draw paths, sometimes I would like to view them without all the anchors and handles, etc. So far, I've been doing this by clicking the 'deselect' option. Is there a faster way to do this, some sort of shortcut perhaps?
View 1 Replies View RelatedA while ago I found out you can deselect something from your current selection set by holding down the shift key and clicking on it. This was a pretty useful tool...but then it randomly stopped working today for me.
View 4 Replies View RelatedWhen I try to select areas in PS CS6 my whole document turns black. As soon as I deselect it comes back in view.Is there something wrong with my setting?
View 1 Replies View Relatedwhen I select several objects and try to deselect some of them in the object manager the list scrolls down after each click. This happens only in long lists when I deselect objects that are rather in top of the list. It then scrolls until the end of the list and I have to scroll up again for deselecting any further object. Can this be fixed?
Furthermore I would like to know if there is any way to select/deselect by a filter? For example: Deselect all objects that are of the type text or all curves that have a border.
I just installed paint.net and the Photoshop PSD file plugin a few minutes ago in order to cut *.TIFF-files into pieces to be saved as *.PSD-files. That worked quite well, but I am not able to see the color depth of the new PSD-file I've saved.
View 12 Replies View RelatedHow can I add 'snow' to a still picture?
View 14 Replies View RelatedIn the older versions I used to just import an image and then import another image and it would place it on top of the first image. Done. Now it places the new image in a box in the upper right hand corner and for the life of me I can't figure out how to put the two images together.
View 7 Replies View RelatedI already have a picture made with writing on it on paint.net. How can I remove picture and only have the writing (no picture
View 1 Replies View RelatedAll morning I have been trying to get two pictures side by side. I finally got the two pictures side by side and saved. When I open the picture it will only open in paint. I would like to put this pic up on my desktop for wallpaper.
There is not even an option to save as background. I tried saving it as a jpeg as well and same thing....nothing.
how do i add 3 difference picture in to one.
View 1 Replies View Related
