I started trying to mess around on paint.net trying to make a new background. I have the start of my design but it is all on top of white and that ruins it. Is there a way that I can either make the white transparent or change it all to a different color? It is the only white in the whole picture, but it is divided up into a bunch of places.
View 1 Replies
How do I make the white areas inside this logo transparent? I can't seem to find a way to do it and I would like to so it can be put onto different coloured backgrounds. The semi-cirlces are all seperate shapes, the white circle outline is a white cirlce with a smaller blue circle placed on top and the text is normal text on the blue circle.
View 7 Replies View RelatedI've got a drawing in Acad 2010 which consist of about 6000 lines. The image is a ship, and I need the drawing to insert in a HMI screen.
Now my problem: The accomedation of the ship is white, as is the background of the sheet. I need the drawing with a black background, but want to keep the white color of the accomedation of the ship. When I change the backgroundcolor of the sheet to black, the white areas inside the drawing will also change into black. If I trie to hatch the white areas inside the drawing the program gives a messages that there are to many open bounderies.
I tried to make a blok of the drawing and move it on a black square, but then again the white areas will turn black.
So for short: How can I make the white areas non-transparent without using the hatch-command?????
If there is a tool or plug in, or effective technique for copying the translucent areas of an image?
This is an original image [URL]......
[URL].......
This is the image I cut out, then added blurs by using color selection and then brushes, and the blur and motion blur tool, but its not an exact copy of the translucent areas.
I have a photo of the sky with telephone wires crisscrossing it. The "sky" is pure white", the wires are black. How can I make the white transparent.. as in, gone completely. I'm not talking about opacity. I want to convert the white to be transparent, ie: gone!
View 9 Replies View RelatedI think there is an easy way of accomplishing this without having get into selecting the background or the logo?
View 2 Replies View RelatedIn the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies View RelatedI made a logo using elements. I have tried numerous ways to make it transparent but when I put it on my pictures there is a white square box that appears with it. I want my whole logo to be transparent. I have saved it png, png 24. And still nothing works. How to get this box to disappear. Just to make sure I wasn't doing something wrong I took a photo and made the background transparent and took the selection that was not and put it into a different photo and the white square edge was still around it.
View 15 Replies View RelatedWhat I want to do is cut part of a photo out and place it onto another background.
I have been trying to do this by: using the magic wand tool to cut out the background of the image I want to move. Then I save that as a .png file. I then open the image I want to use as a background and (after copying the .png image,) I paste the .png image on top of the background.
At this point, one of two things happens: I either get the first image on there with lots of backgrounds showing through faces, etc; or I get the image pasted onto the background but I get the box with the little grey squares and I cannot see the background through that. I have tried playing with the transparency of the background, but then it still blends through the original images.
I've got all these great digital backgrounds that came with my studio set up and danged if I've been able to use a single one. (I don't have photo shop because its above my head and I really don't have the extra cash for it right now.)
I don't have photoshop and all the instructions say to save the transparency directly to pdf in photoshop. Saving to gif, tiff, png and opening as a stamp in acrobat or copy and pasting the transparency from paint.net into acrobat always removes the alpha channel.
View 2 Replies View RelatedCan I use a the color replacer tool in PSP 7 to replace a color in an image with a "transparent" color or is there some other way of doing this using the eraser for instance?
View 1 Replies View RelatedI want to create a collage of small pictures. I would like some of the pictures to be rotated, but not at 90 deg or 180 - at smaller angles off normal. I do not see how to rotate an image by a preselected angle, or rotate on the fly.
As a second question, for the pictures I want to make the background [usually a solid color, white] transparent so I can overlay one object with another.
How do I make just the background fully transparent, without affecting an object?
I have a JPG which is a black and white line drawing I want to drop this on a collage where the line drawing shows, but the background must be transparent so other things come through. Essentially, I want to turn the color [ or lack thereof] white to be transparent, and black to be black.
How to do this, or if it can be done.
How do I make a white background transparent? I tried using the fill option but that didn't work.
View 1 Replies View RelatedI'm sure there must be a way of doing this but I've been fiddling with it for hours. How can I remove, or make a background transparent so that I don't get the white box when I use this on a coloured background.
View 3 Replies View RelatedI need to create white letters on a transparent background, but don't know how. You can't see white letters on a white background, and if I set the layer to invisible I can't see the letters either.
View 4 Replies View RelatedI'm trying to make the attached icons have a transparent background. Tried just selecting the white space but this causes the edges to look awful on dark backgrounds.
I've also tried the Grim Color Reaper but cannot find a setting that keeps the icon as it is, only making the edge semi transparent.
I'm not sure if you can do this but if any of you have seen the Itunes Color Effects app, I'm wondering if there is a way to keep color in one part of a photo while making the rest B&W? I know how to make it B&W & I can't get it to work with the paint bucket or anything like that.
View 2 Replies View RelatedHow can I change the color of the background in an image from white to transparent?
I am using PSP v7.04
I didn't realized that as I'm importing images, the 'background' was defaulting to white. I'm working a couple images right now, in which the transparent setting is really needed. I found where to change the default, but not how to change it for existing images in PS already.
View 2 Replies View RelatedIs there a way to restore lost opacity to a layer? Let's say I have a semi-transparent area, and want to bring the opacity there back to 100%.
View 14 Replies View RelatedI need to cut out an image from a transparent background. Is there a way to do that with Photoshop Elements 10?
In other words, I have an image (say a face) that is on a rectangular background that is transparent. I need to cut away all the transparent area so there is NO background, just the face, and an irregular shaped image. Is that possible with Photoshop?
This is for inserting the image in another program (Sketch Up) which does not always allow transparency.
In LR 3.6 I worked with panoramas imported as 16bit TIFs from PTGui which, at their margin, are transparent. These transparent areas were initially marked white in LR 3.6. and, most importantly, it was readily possible to modify these areas with the brush or repair tools in LR. After updating to LR5 and importing my LR 3.6 libraries I realised that all of the retouche and modified transparent areas are white again and all the retouch I did is gone, where by e.g. the circles indicating where I used the repair tool are still in place.
How can I retrieve and retain the modifications I made in LR 3.6?
How can I turn transparent areas in TIFs within LR into areas I can modify?
I am in the process of adding lighting effects to one of my images. I'm trying to get a lightning effect, and decided to use Supernova off of the image's frame. This worked for full-frame layers, but on smaller layers, not so well.
What's happening is that I'm trying to get single objects in layers to have a lighting effect, but it's lighting up the transparent space around them, making a distinctly brighter area... well, it's better if I show you:
Base:
Adding the Effect:
The Unsatisfactory Result:
How to merge two or more specific layers together, that'd be fantastic.
I have a logo file, saved as PNG, that is black on transparent. Very simple file, just stylized black lettering on a transparent background. In Illustrator CS5, I can place that file, do a "Live Trace" in "Lettering" mode, and Illustrator will correctly ignore the transparent areas when I expand the trace. After expanding, I'm left with scalable paths and an easy way to change the fill color to have the logo work with my background.
Fast forward to Illustrator CS6. I try to do the same thing but a) there is no "lettering" preset for Image Trace and b) there is no setting I have yet found to cause Illustrator to ignore the transparent areas when I expand. If I then fill, everything inside the bounds of the placed image (the square containing the logo) is filled with that color. The only way I've found to get similar results is to go through the layers panel after the Expand and deselect each piece of the image that should not be filled. I have a hard time believing this is the desired approach.
how to make only certain areas of a stock images transparent.
View 3 Replies View RelatedI can't recolor white to transparent with the recolor tool, is this a bug? is there any other way to do it? :?:
View 4 Replies View RelatedI have a multilayered psd file. All layers should remain opaque except the black to white gradient layer where I need the white to be transparent. So that when I place the final psd on top of a block of solid colour in Indesign the gradient shows the background colour through where the black fades off.
View 4 Replies View RelatedHow do I make the blue areas white? I rotated a black and white line art and solid (background) blue areas appeared. (CS3 on XP)
View 10 Replies View RelatedHow do I get rid of the white areas of the pieces that are fragmented and animated? Is there any possible way to make a texture go through the object?
View 3 Replies View RelatedI have an ink drawing intended for part of a comic book that I scanned in black and white (no grey) and I am just trying to replace the white areas with transparency so that I can come in with other layers and add color to the image...I am just wondering how I would go about doing this...
View 4 Replies View Related
