Is there any way to get the transitions of the separate effects on images? That is, to an effect at 100 and then place it to 0, getting all the images from 100 to 0 (100 images).
View 3 Replies
Wouldn't the Adjustments fit in Effects>Colors? Or, if you're more conservative, perhaps Effects>Adjustments? The only negative I can think of is there'd be one extra click, but I think it's worth it for the sake of consistency. Adjustment/Effect split to me?
While we're on the subject of cutting out menus, I considered the results of cutting another menu; I'm not too sure about this one, but hey, throw mud at the wall and see what sticks. Rick has removed the Window menu in 4.0 after he moved its functionality elsewhere. This could also be done with the View menu. "Zoom to Selection" could be integrated into the "Fit to Window"/"Actual Size" button (a 4.0 feature) when a selection's made.
I have stared to create a collage, after inserting some of the images, I saved the project and closed the program (x3). When I opened again the callage, all the inserted images was merged together and I can move only all of them together.
How can I separate the images so I will be able to move each of them separately in order to insert more images and change the order of them in the collage.
I upgraded to PaintShop Pro X4 from PSP v9.0 and I noticed images are not opened in their own separate windows anymore? I need the ability to open an image in its own window and drag it around the workspace ...how to enable this in PSPX4 ??
View 8 Replies View RelatedI have been looking for a smoke effect to blend several separate images for a banner. I tried using clouds but couldn't get it to look right.
View 2 Replies View RelatedI have a film made from thousands of images that I would like to apply an effect to. There are quite a few posts on here about the subject but tend to end in,
"against the rules, thread locked"
Is there anything out there that can apply the same effect to thousands of images?
Is there an easy way to apply multiple effects on a set of images or individual images, similiar to something like a preset in LightRoom.
For example, if I run the following effects I have to apply it to each image one effect at a time and repeat for each image that I want the exact same effects applied but would prefer to do it all in one go
Blur/(GPU) Gaussian Blur
Noise/Reduce Noise
Photo/Sharpen+
I use these to clean up the moire from scans and reduce dust/dirt then apply a mild sharpen effect to bring back the now softenend image back up slightly. Being able to have presets would be a real bonus for quick clean ups, of digital camera images or camera phone images
I found it by spending a bit more time looking through the menus, under the Effect menu and the Advanced tab and creating a custom effects script ......
But now would like to see if I can have a list of presets instead of having to load them through the script engine one at a time, maybe an option under the 'Effects/Presets' menu option listing all the scripts that are currently saved.
Knowing that X5 won't apply effects to 48bit images unless I convert them to 24bit first, If I apply a mask first over to the 48bit image, then apply an effect to that, will this work? or do I still need to convert my image to 24bit?
View 3 Replies View RelatedHave reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies View RelatedI'm using a single file on a server that I need two animators to be ablt to work from. Can I do this with having each animator have to work from a separate file?
View 1 Replies View RelatedI have created a short (<3 seconds) video comprised of 2 layers. Each layer was filmed as a green screen, and I used Keylight in After Effects CC to create a transparent background. My ultimate objective is to use the clip to create a transition for use in ProShow Producer, as described in the link [URL]..... To do this, I need the main video file, and a second file containing only the alpha channel.
I have used Adobe Media Encoder to output a FLV, and told it to Encode Alpha Channel, as was suggested, but I only get the one file (the main video). How do I get the alpha file?
I am using AE CC.
How do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
Is there a way to keep the clone stamp's initial position and then add the path onto it?I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.
In PSP X5 I'm pretty sure there's a way to make User Defined Instant Effects in the Adjust mode, but I can't find the steps in the Help Files. I'm thinking these are just scripts, but I'm not sure.
View 1 Replies View RelatedI don't even know if this is possible, but I have a logo that has two separate images in it, overlapping. I would like to separate the two images whole.
View 4 Replies View RelatedHow do you stitch two separate images together so they become one image?
I have looked in Help and can find no reference to 'Stitch'. Does this procedure go under another name in PS?
How do I separate images after gangscan? I am scanning many old family photos. I am scanning 6 at one time and saving them as a .jpg. How would I go about separating those pictures into individual .jpgs?
View 2 Replies View RelatedNever used Photoshop before.
I have an image which contains 4 images in a PSD and want to extract them into seperate images so i can upload them to my website.
I guess this is very simple but i don't know which tool to uyse because there's too many
I'd also like to remove the text from within each image and save them as seperate png files
I'm trying to get an image to be the background on 30 odd seperate images. I keep getting things like "place" command not available when I use the batch. I can do everything manually but as soon as its automated it fails.
View 3 Replies View Relatedif it was possible to send a single print job from photoshop to a printer so that an image1 is sent to be printed on page 1, and an image2 is sent to be printed on page 2. can 2 seperate image files be printed so that the first is considered page1 and the second is considered page 2?
View 7 Replies View RelatedI'm new to GIMP. I want to use it to create/test colour (or greyscale) separations for a woodcut, but I'm finding it hard.
For example I have attached a black and white image. kirsty.JPG (84.7K)
Number of downloads: 3
I open the image in GIMP, then from Image I choose mode - indexed, 4 colours. So far so good as this gives me the 4 greyscale levels I need to create a two block woodcut. Now I use the 'select by colour' tool to find the first colour, and I paste this into a new layer. That works fine. Then I select the next colour and try to paste that into a second new layer, but it doesn't work. It produces another layer called 'Floating Selection (pasted layer)' and won't paste the second or third layers.
How can I separate the 4 layers into individual images??
I could seperate multiple images - like an old photo album page - with my old Photoshop. I can't find that on my new CS6.
View 1 Replies View RelatedHow do you import four separate images( four separate TIFFs) into four channels?
View 3 Replies View RelatedI'm basically trying to match the colour of the single jar shot to that of the jars in the colour reference file (the one with loads of jars), so it looks as if the single shot could be a closeup from the group shoot.
There's a batch of these single jar shots so I was looking for an adjustment I could do once and then apply uniformly to the rest.
My attempt was to create a series of adjustment layers that worked for one image and then apply that to the rest, but I couldn't come up with the correct combination of adjustments that matched the reference.
I'm confident with doing colour adjustments on the items inside the jar so you needn't worry about that, it's more the overall white balance / slight lessening of shadow underneath the shelves / shine of the glass jars / warmth and cleanliness of the picture's tone.
The single shots will cycle through as a GIF, so it's important to look as if it's just the content of the jars changing, rather than the entire shot - hence needing a single solution that was applicable to all pictures.
Ok gang my daughter as asked me to print of a image of her and her sisters - she's going to redraw over it with thick pencils.
My question is this, how do i or can i make four separate proportional images of the one big one for print of on A4, so it would be four quarters re assembled as the one big original?
I am preparing a multiple page document and would like to know if there is a method of importing separate .eps files into individual pages, with only one image per page. I have been using CorelDRAW X3 for awhile, but do not know any Visual Basic to create a macro to do what I am looking for. Is there any method of importing each file to a new page, rather than adding a new page and importing the file separately?
View 2 Replies View RelatedHow can I combine separate jpg images onto one page in Photoshop Elements 11
View 1 Replies View RelatedI have 9 separate files/folders of images on my drive in LR . I want to save (export) the images to one CD, keeping the images in the 9 separate files as named in the hard drive. How do I do this?
View 1 Replies View RelatedI'm working with InDesign CS5.5 on a Mac and need to import multiple images into separate layers. The imprint project has a base layer template and several company logos that need to go into their own layer. Is there a way to bring all the logos in at once and have them create their own layer without manually creating each layer and placing images one by one? Can InDesign do this automatically or is there a script? I can't seem to find a way to automate this process.
View 3 Replies View RelatedIs there a way to have separate objects in 1 layer, what i mean is that if you paste something, that i want it to show up as a objects in de layer, like in photoshop, so i can still drag it around.
but the way it is now, is just if you paste something that it REALLY pastes it on the images, you can't move it around after you deselected it.
I've recently finished a catalog with 700+ images and I'd like to create an index for future use.
I would like to have an action which allows me to save a general purpose size image for e-mailing to customers as well as a thumbnail size image for photo invoices. This I could do normally by making two seperate actions for the two, but there is an issue with the categories of image types.
Within the catalog the images are of products, and thus are related to a brand. I would like to index the images into a brand based folder, and then into seperate folders for thumbnails and general use.
So essentially, the workflow would be something along the lines of
Create New Folder for Brand/ Category
Open Image
Resize for General Use
Save Image As... in Brand > General Use
Resize for Thumbnail
Save Image As... in Brand > Thumbnails
Close
Repeat for all images in category.
Create New Folder for new Brand Category
Open Image
.... Etc etc.
Also, is there a way to select a resizing of an image by it's longest/ shortest edge within an action/ droplet? I know Image Processor has this capability but it seems strange there is no ability within an action.
Currently working on a PowerPoint styled animation.I've parented the source text of 5 text layers to 1 text layer so I can easily alter the text. It is essential that I have 5 identically texted layers.
My requirement isn't much: To assign colors to individual words without having to separate those words into different layers.
