I have a film made from thousands of images that I would like to apply an effect to. There are quite a few posts on here about the subject but tend to end in,
"against the rules, thread locked"
Is there anything out there that can apply the same effect to thousands of images?
Is there an easy way to apply multiple effects on a set of images or individual images, similiar to something like a preset in LightRoom.
For example, if I run the following effects I have to apply it to each image one effect at a time and repeat for each image that I want the exact same effects applied but would prefer to do it all in one go
Blur/(GPU) Gaussian Blur
Noise/Reduce Noise
Photo/Sharpen+
I use these to clean up the moire from scans and reduce dust/dirt then apply a mild sharpen effect to bring back the now softenend image back up slightly. Being able to have presets would be a real bonus for quick clean ups, of digital camera images or camera phone images
I found it by spending a bit more time looking through the menus, under the Effect menu and the Advanced tab and creating a custom effects script ......
But now would like to see if I can have a list of presets instead of having to load them through the script engine one at a time, maybe an option under the 'Effects/Presets' menu option listing all the scripts that are currently saved.
Is it possible to take 3-4 effects, all mixed together, like brush stroke, solarise, warp sharp, neon... mix them all together, and process a number of pictures while changing the mix level of each effect, and also varying some of the effect settings, such as brush size, brightness, etc...
are there any scripts that can do that? any macro plugins that can control other plugins? is there a crafty programming trick that could be fashioned to vary and mix effects across a task of batch processing?
I'm an architect and would like to automate a process we do all the time: shadow studies.
Here's a typical scenario: we render a view of a building, same camera angle, just changing the time of day for each rendering. Then we take those renderings and overlay them in Photoshop setting each layer to "Multiply", add a Brightness/Contast or Levels adjustment layer, and save said image. We do this for three times a year (one equinox and each solstice), often a few views of the building for each.
So a typical shadow study might be 4-5 views, three times a years, so that's 12-15 composite images. This process gets repeated multiple times for each project as we change the design, so there is a lot of repetition.
I know how to create simple Actions. I know how to run a batch. What I don't know how to do and would like is a way to run a batch where I select some files and it creates the composite. The hurdle is making the Action and Batch be "generic" so that when I run the batch, I can select the images I want and the place to save it. That's the part I don't know how to do.
The Action I created is limited by (a) files open and (b) therefore only applicable to a certain number of open files (if I create the Action with 4 open files, it will only work on 4 files, not 3, not 5).
If required, I could probably script something. I know some programming/scripting, but have never done it for Photoshop.
I have a whole bunch of photos I need to batch process, but, when creating an action for this, I stumbled upon the problem that the paths I selected with the pen tool, and saved under the "Paths" tab need to be in every image for to be used in the action.
View 1 Replies View RelatedI want to prepare mutliple images for press release, that include a small border wtih copyright information. Simply every photo i work on must be submitted with a small border and the same text indicating copyright on all of them.
I import from light room and use a batch action to create the border. Thats simple enough, is it possilbe to create an action or script so that can i drop in a text layer into each of the images without a manually copying the layer text and pasting it into each file ... one at a time .
I have a collection of images that vary from 2.5 x 2.5 to 8.5 x 8.5 ( all square ) i need to rezise all of them to print 2 x 2 , its about 3000 images and would take me a few days manually is there any way to do it in a batch ?
View 4 Replies View RelatedIf you can re-size batch images in paint.net, I'd like to know how you usually go about doing that. Just today I downloaded from a blog a some odd 40 game screenshots, in what looked like a standard widescreen resolution. After checking the dimensions on the pictures, I found that they were all 1920x1079...... Being off by 1 pixel is bad, enough to make me go crazy, so I opted to edit them into the 1920x1080 resolution. I found a plugin that would add in a batch re-sizer and it worked. But upon closer inspection, it blurred my original image just slightly. Thats even worse than being off by 1 pixel.
So, I came across this layer saver executable.. I opened all the images in one canvas as layers, re-sized the canvas by 1 pixel, saved the lot as a PDN, then extracted all the layers as a brand new perfect image except for 1 column of pixels. Other than re-naming everything in ordered numbers, it works perfectly. But still, I have to know, is there anything just as good that can be within paint.net?
Question: How do I “Add” multiple TIFF files to a Batch Process so I don't get the "what page" question?The PP9 Batch Process Added – OPENED - files, processed according to my script, then saved the result to new type & folder.
X5, a recent purchase, does an IMPORT of TIFFs instead of an OPEN and wants to know what page I want to load. Answering this on each file defeats the purpose of batch processing. How I should write the script?
I have about 1.000 files in .jpg and would like to create a thumbnail for each also in .jpg width 800 variable length adding a t prefix to the original name for the thumb name.
Can PSP do this in a batch process?
I frequently use a script to resize .jpgs from 3600x3600 to 1000x1000 dpi to save space on my hard drive. After resizing 300+ .jpgs last night, I found that they all retained their original file size. An image that started out as 3600x3600 dpi with a file size such as 3.5mb that was resized to 1000x1000 dpi using the script in X4 still had a file size of 3.5mb when it should have been considerably smaller than 1mb. I relaunched the application and rebooted my computer but no change. To fix the problem I had to run the .jpgs thru the batch process again using the same script but in X3.
The script I was using was created in X3 so I tried creating an identical script in X4. Regardless of which script I used in the X4 batch process, the same thing happened.
This problem seems to be unique to the script and/or batch process. I can open a .jpg file in X4, resize it from 3600x3600 to 1000x1000 dpi, save the changes, and the file size changes accordingly.
I have a set of around 100 images which I need to edit for hue and saturation. All are similar. Can I batch convert these with PSP X3?
View 2 Replies View RelatedWhen i open file with paint.net and click save sometimes it make it larger and sometimes it make it smaller. When the bith depth is selected as auto are there any chance that paint.net will loose quality ? I check that generally bith depth is not changing it is 32 bit but it is able to reduce size of image which have been yahoo smushed or pgnoutwin processed. How is this possible ?
Are there any plugin which will batch read images and save them if the new size is smaller without quality loss ?
Is there any way to get the transitions of the separate effects on images? That is, to an effect at 100 and then place it to 0, getting all the images from 100 to 0 (100 images).
View 3 Replies View RelatedKnowing that X5 won't apply effects to 48bit images unless I convert them to 24bit first, If I apply a mask first over to the 48bit image, then apply an effect to that, will this work? or do I still need to convert my image to 24bit?
View 3 Replies View RelatedI am a Mac user and have a printer that can print pictures 9 by 3 feet big, one sheet at a time. How to stack multiple images together in a 9 by 3 ft frame so that when they print out i can cut them and have a bunch of posters.
View 1 Replies View RelatedI would like to print multiple images on a single sheet other than those available on the sidebar of the print dialogue box.
I searched: "when you hit the print button-the wizard will come up- there is a "printing preferences" button- when you go there you can set the "pages" per sheet to 16- this will give you 16 copies of the picture on each sheet". The options I have available are 1, 2, 4, 9, 16 but I'd like 6 & 15 or possibley some other configuration. The second suggestion was to paste multiple images onto the page, is there a way to do that so the images line up in a regular grid such as might be done with cells in a word processing program?
I have the most recent version: 3.5.8
how to save all the images i have opened on paint.net at once?
View 7 Replies View Relatedin X4...seems they keep making the Organizer worse and worse (why I still use X). When I drag an image from the organizer to Edit and then want to edit another image, it closes the first image and I don't want it closed. How do you have multiple images open in Edit from the Organizer?
View 7 Replies View RelatedIf there is a way you can open up for e.g. 100 images then make changes to the image like Hue and saturation then apply it to all the images and save them all? I do stop motion and have a lot of images that i need altered in exactly the same way but i need a more simple way than 1 at a time.
View 2 Replies View RelatedBut Im trying to watermark my still pictures of a gif i created, and whenever I add text to one image, I dont know how to make the text "bleed through" to the other images so I wont have to replace them in the same place ect. it always looks sloppy and out of place whenever I re-type the text into a different image.
View 5 Replies View RelatedI'm a photographer, and I would like to add a small watermark to photographs I publish online. So that people would find my name and website. I know how to add a watermark to a single image, but I was wondering if there is any way to add the same watermark to multiple images in one operation. This can be done in PS so I was hoping that there is also a way with Paint.NET.
View 5 Replies View RelatedI have a folder full of icons (.png) that I have created for an application at work but they now need greyed out versions for use as disabled buttons. There are 71 icons and it will be time consuming to do it manually so I wanted to see if there was a way to turn all images to a grey state in one go?
View 1 Replies View RelatedPSP7 installed on Win7 Pro, 32-bit.
When I double-click an image file name in Windows Explorer a new instance of PSP7 is opened for each image. What I need is to open multiple images in one instance of PSP when I double-click the image name.
I'm a new user of PSP X3, having upgraded from X2 and previously from X. When I used earlier versions, I could have numerous images open in the workspace, re-sizing, comparing, cross-cloning, etc. Now with X3 I can't seem to find any setting that will allow that same multiple image viewing. I've looked at the documentation but can't find any mention of this issue.
Am I just missing some checkbox or did Corel abandon this capability?
Just upgraded to PSP4. In the older versions I could open multiple images into the workspace. Each one had a border with a banner at the top identifying each picture. Each one would come forward by clicking on it. I could move them around and position them so I could even clone from one to another. Can I not do that in PSP4,
View 1 Replies View RelatedHow to make a rotating gif, sliding through multiple images but couldn't seem to find anything. I know that this is a pretty simple task and used to be able to do it but have forgot in the long while I haven't got to use Paint.Net.
View 4 Replies View RelatedI'm a bit of a Newbie to Paint.net. Is there any way to have multiple images open at the same time on ythe screen -- and to be able to select parts from one image and paste them in another -- that sort of thing?
View 3 Replies View RelatedEver requested multi-image editing capabilities which would allow you to see more than one graphic (full size) on the screen at once? I'm constantly editing multiple graphics at once (often copy/paste into one or the other), or comparing two graphics side by side, and I REALLY miss this interface from the old version of Paint Shop Pro. (Not the new, devil version of PSP by that spyware bloatware peddling "Corel" company, I mean real PSP (version 5 or so), by JASC. Corel ruined that program! )
Example:
If this is possible to do in Paint.NET easily, another thing would be to provide a way to auto-layout multiple open image windows (attempt to arrange all open windows so that each image is fully visible with no window overlaps).
I am just trying to identify and select a group of photos which I can then copy to an external USB drive to have prints made. I know how to identify and select the photos. I have been unable to figure out an easy way to copy all of the selected photos to an external drive.
I can use 'Save As' to copy individual photos, but have been unable to figure out how to simply create a 'tag' and then copy all of the tagged photos to the drive. I can also copy all of the photos to a Media Tray, but cannot figure out how to work with a group of photos rather than just an individual photo.
how to take a photo or image, create multiple images to print and when cut out, will create a complete image when painted. Similar to how its done in photo shop only, I'd like to zoom in to areas, trace out the areas, then take those selected areas that I traced and move them to a different layer. Is this possible?
View 1 Replies View Related
