Paint.NET :: Drawing With Angles
Jan 7, 2014
1. Is there anyway to adjust the angles of lines outside of just using trial and error? For instance, I just the line tool and create a line - it tells me what angle the line is, and I have to move tiny little amounts to try and make the line a certain angle. Another example would be when you paste something and are rotating it, again, you have an angle value, but you just have to kind of eye it and get it close. So is there a way I can adjust these (using a field where I can type in the numbers I want for instance)?
2. I'm creating a line that isn't straight. Over the course of the line it deviates from 0 degrees to 5 degrees. Is there anything that I can use to create tick or hash marks along the line that would be right angles to the line at the portion they are located at?
View 1 Replies
ADVERTISEMENT
Sep 6, 2011
Where I can get a wheelchair drawing of all 3 angles?
View 1 Replies
View Related
Aug 7, 2013
I want to create a segmented polyline with known angles / lengths, but I want to do this in 1 operation without having to copy/rotate/chamfer etc.
I'm sure it has something to do with UCS, but I've not used it in quite some time, I am stumped and everything I have tried so far has failed.
View 5 Replies
View Related
Apr 6, 2012
I am using a 2007 autocad version,is it possible to take dimensions like radius and angles on a 3D drawing?
View 1 Replies
View Related
Dec 16, 2011
I'm currently working on a Spa design and using new tools which is all new to me. I've used Draft Angles before but on a spa where you sit normally the sit reclines back.
Now I'm not sure how to do / show this in a 3D drawing. I've read and serached for different things but have yet to find something similar I'm looking for.
I've attached a PDF along with the circled area as to what I'm trying to accoomplish. Wanna be able to show the dip etc via Inventor.
View 1 Replies
View Related
Sep 11, 2012
If I am drawing in 3D and I want to draw a line with a specific angle, how do I choose the plane that it is drawn in? Cos whenever I specify an angle the line is drawn in the horizontal plane
View 2 Replies
View Related
Nov 1, 2013
I have a model of that I need to save images of from different angles, but they all need to be proportional so they line up. How can I get images that are all proportional from different angles?
View 5 Replies
View Related
Feb 13, 2012
Is there a way to have AutoCAD use the "right angle symbol" instead of showing 90 degrees when it measures right angles?
View 8 Replies
View Related
Jun 28, 2012
Is there any way to import the extra angles from a DVD? There is only one box to check for each chapter but the additional angles are listed in the box above the preview window. I thought maybe clicking on them would do something but it didn't. I also tried "Select All" but only the first angle was copied.
View 7 Replies
View Related
Feb 26, 2013
I have created the following code in VB.NET that i allows you to calculate the internal angle of a polyline. First delivery getting the angle of deflection, a ves obtained 180 you rest this and get the inner corner. All fine, as long as the polyline is the image-1.png. Otherwise, if the polyline is as in the image-2.png there is an error in the vertex B.
That algorithm could follow in order to comply with the correct value. Since later this data i presented it in a table of AutoCAD.
Public Shared Function AngleDeflection(ByVal pto3d As Point3dCollection) As ArrayList Dim anguloM As Double = 0 Dim vangl As ArrayList = New ArrayList For i As Integer = 0 To pto3d.Count - 2 Dim V As Integer = pto3d.Count - 2 If i = 0 Then anguloM = Math.Atan2(pto3d.Item(i).Y - pto3d.Item(V).Y, pto3d.Item(i).X - pto3d.Item(V).X) - Math.Atan2(pto3d.Item(i + 1).Y - pto3d.Item(i).Y, pto3d.Item(i + 1).X - pto3d.Item(i).X) vangl.Add(anguloM) Else anguloM = Math.Atan2(pto3d.Item((i - 1) + 1).Y - pto3d.Item(i - 1).Y, pto3d.Item((i - 1) + 1).X - pto3d.Item(i - 1).X) - Math.Atan2(pto3d.Item((i - 1) + 2).Y - pto3d.Item((i - 1) + 1).Y, pto3d.Item((i - 1) + 2).X - pto3d.Item((i - 1) + 1).X) vangl.Add(anguloM) End If Next Return vangl End Function
View 2 Replies
View Related
Jun 27, 2003
How do I have 2 drop shadows with different angles? All of my dropshadows change angles whenever I change the angle of just one of them.
View 2 Replies
View Related
Sep 25, 2013
I'm learning how to texture a tyre. I've applied the Unwrap UVW modifier to a torus. Then I've applied Flatten Mapping. After that I've manually rearranged the surfaces as can be seen in the below picture. Now the thing is, my teacher has asked me to apply Relax tool, especially Relax by Face angles. I can't figure it out how to use it.
I've read the Autodesk Document for this but its too technical. Also, how should my uvw mapping look in the end?
View 7 Replies
View Related
Aug 11, 2012
I render 36 frames from different angles to PNG files on 3Ds Max 2013 but now I want to hide a model and make it so all the parts its blocking to also become transparent.
If you don't understand what I mean I don't want to simply "hide" the instance because then all the parts in the back that otherwise would be invisible would become visible, I just want those parts to become transparent as if I "subtract" the image of the hidden instance out of the final render image.
Like the 3d model is invisible but erases anything behind it.
View 7 Replies
View Related
Jan 24, 2012
Is it possible to change the direction the camera is looking when making a walkthrough?
For example, is it possible to have the walkthrough move along the side of a building, but have the camera facing the building?Basically, If it was actaully a person walking, they would be walking sideways.
View 4 Replies
View Related
Jun 24, 2012
I want to draw the VW logo with AutoCAD, 2010 but the problem is that I do not know how to get the sizes/angles to draw it. how I can draw it?
View 8 Replies
View Related
Mar 31, 2012
i measure the angle between two lines. the value of angle is displayed in command line but annotation letters are so small i can't see them. i don't want to zoom to every angle i measure. how to make those annotations bigger size?
View 4 Replies
View Related
Nov 27, 2013
I am trying to bring an element (a building's floor plan) in one drawing into another drawing where it can be joined onto another building and the site plan.
The thing is, the UCS of the destination drawing is different from the first drawings. The Y-Axis in the destination drawing is pointing somewhere beyond the 3 O'clock position while it is still at 12 o'clock in the first drawing.
How do I determine the exact angle of the rotated UCS in order to insert the element at the right angle?
View 2 Replies
View Related
Mar 8, 2012
I have this block. It's called Linear Stock. In this block, there are 2 visibility states. The one that I'm looking at currently is called Stretch with Angled Ends.
What I'd like to have happen is for the angles created when I stretch each grip to the proper location to be readable by a table or excel document. I know that I need a parameter for this to happen, but I'm not sure how to make it happen.
Using AutoCAD2011
View 0 Replies
View Related
Aug 31, 2012
I am using Civil 3D 2012. I am drawing a water line in a profile with a vertical scale of 1" = 10'. I am trying to draw lines at 45 deg angles to account for standard fittings.
Now, I tried to block a 45 deg angle and exaggerate the y scale, but for some reason this does not work well mathematically. Is there a way to draw lies at a certain slope, or at a certain angle from another line, while taking into consideration the scale exaggeration?
View 1 Replies
View Related
May 15, 2013
In a part file is it possible to find the adaptive workplanes used to create extrusion1. And then find if the two workplanes are at an angle with respect to the origin planes.
Have been looking for a while but it seems hard to find information on workplanes
View 4 Replies
View Related
May 30, 2012
When I create a line using dynamic input, I key in the length, TAB, and the angle. Is there a toggle setting somewhere that will allow me to enter angles greater than 180°? Drawing Units are set to Base angle north (270°) angles in D-M-S measured clockwise, yet dynamic input angles are measured from east (0°) both clockwise and counterclockwise. I.E. an input of 90° gives me either north or south, depending on where the cursor is located.
Ideally, I would like to be able to enter either 225° or -135° and have the line head off to the southwest. So far, I'm stymied and have to resort to command line entry. How to make dynamic input do what I want it to?
View 7 Replies
View Related
Oct 4, 2013
In the course of working up a tooling proposal, I attempted to replicate a 3D part from a customer print. While doing so, I noticed that 3D Sketch will not, under any circumstances that I can find, allow an angular dimension between a line and a plane. The customer print has two pipes projecting at odd angles from a base flange, one of which has an elbow. The print lists datum dimensions for the open pipe ends and the elbow, and gives vertical and horizontal angular dimensions to define the directions in which the pipes emerge from the flange. I have defined these three datum points in 3D space without any trouble, but Inventor 2013 will not allow me to define an angle between these sketchlines and the XZ and YZ origin planes, or between these sketchlines and the faces of the flange base I've constructed.
I am currently waiting on a proper 3D CAD model from the customer, and I'm considering longhand trigonometric calculations to place these lines properly, but I find it very hard to believe that Inventor is incapable of constraining a line to lie along what is effectively the surface of a cone.
Using:
Inventor 2013
AutoCAD 2013
View 5 Replies
View Related
Sep 15, 2005
Ok i know how to do motion blurring and radial blurring just fine, but i was curious how pictures like these two are done? Dont worry i had permission from the authors to post these
Wondering how the motion on the ground was done
Wondering how the different angles of mation blur are done all over the picture... Also how the radial blur was done on the wheels since it isnt a perfect circle.
View 4 Replies
View Related
Jul 4, 2006
What I would like to do, for a logo I'm working on, is to add [what I call perspective] a "turn" or angle to the elements of the logo. If you imagine a couple of diagonal lines running north and south at a 45 degree angle. They are separated and meant to resemble the outline of a road.
Now I would like to add elements to the surface of this "road" and have the perspective be correct - as if they are laying on this surface.
View 9 Replies
View Related
Dec 17, 2004
how to make a glowing effect with satin layers.... I want the stars in this picture to twinkle. I am very familiar with gregs plasma tutorial its just that for some reason since the stars are white its difficult.
View 1 Replies
View Related
Sep 1, 2011
I am using inventor 2012. Is there a way to ordinate dimension angles? For example dimensioning an irregular bolt pattern in a flange.
View 3 Replies
View Related
Sep 21, 2011
I have a arc that is about 21.5 radius and .5 in width. My problem is that it is going on a bench that i have made and the corner piece needs to be cut out and i am trying to figure how to make this line look like an actual piece. I can extrude the piece to 21 inches tall, but then i need it tapered back to fit this bench were making.
View 9 Replies
View Related
Jun 17, 2011
I face problem to draw angles. Normally angle are defined clearly but if they show the angle b/t two lines . Then may problem to understand . More clearly view image. I want to draw line with these angles more quickly and easily.
View 9 Replies
View Related
Apr 8, 2013
I'm having the hardest time creating a marquee style image in illustator.. (something like this:
[URL]....
So far i've been able to make the rectangle witht he curved angles, but can't seem to get the circles inside of the marquee..
Any tutorial or a quick guide that can create one?
View 4 Replies
View Related
May 24, 2013
When modifying a pre-existing shape by dragging an anchor point, the paths refuse to stay straight/right-angled (see image below, red lines). Even when I line it up beautifully and cannot see any hicks in the line, they become crooked the moment I let go of the anchor point. Certainly the shift key won't work. Is it something I need to change in my settings? 'Snap to point' doesn't do anything either, obviously. Smart guides are on too.
View 2 Replies
View Related
Apr 30, 2012
I have two questions to be exact :
1) Can I use the drawing tablets like the Wacom Bamboo with Paint.net???
2) Can Paint.net be downloaded onto a netbook or a computing tablet/eReader???
View 3 Replies
View Related
