Lightroom :: Tag Only 6 Various Placed Photos In Library Grid With Graphic Watermark?
Dec 15, 2012
I am a photographer shooting photo sets of cars and need to keep them in order of shooting upon uploading. I am trying to attach a graphic logo watermark to the first shot of each set while keeping them all in the same export order. But...I understand in order to attach the logo, I must be in export mode. Upon completion of the first photo watermark attachment.....I need to complete the export before going on to the next first shot of the series in the same library grid.
Maybe I am missing something here but need to figure this out other than in the export mode. If I take the pic to edit in photoshop to apply and flatten I back into Lightroom it puts the watermarked photo at the end of the library grid of photos.Do I need to apply to original instead of a copy to keep in right order?
I've seen several adobe tutorials and youtube videos that show moving photos or folders by drag and drop in the library grid view. I cannot get it to work.
Steps: 1. Mousedown on a photo (not the frame) in the grid 2. Drag the mouse to a folder in the "Folder" pane (left of the grid) 3. Mouseup on the destination folder
Results: Nothing happens. The mouse cursor doesn't change from the arrow. There is no indication I can drag and drop. The photos are not moved.
The photos are stored on a NAS. Of course I can move them around via Windows Explorer, but I want to do this from inside LR4 for obvious reasons. From LR4, I can create new folders, but I still cannot move photos into those folders. I also tried creating a new folder on a local drive. Again, I was able to create the folders, but was not able to move any photos into the folder.
How do I get the watermark to work in lightroom? worked fine in the trial but does not show up on photos now. I am starting to get very frustrated with it.
Having a screen flicker problem since 5.cRC came out, but only in Library/Grid mode when scrolling or selecting from the grid. But only when there are more images than can fit on one page in the grid.Seems to use an unusually low amount of memory with nothing else running on the system.
I used to be able to highlight several images in the Library Grid mode, type in a Metadata Label, and that label would be applied to all of the images. Doesn't work any longer. What am I missing? Doesn't work for Keywords either.
I have a standard watermark for all the photos I import. Recently I importred wedding photos, that I want to give a copy to the couple without the watermark. How do I eliminate the watermark short of doing it indivdually? Is there a way to retract the watermark on a folder of photos?
I make it a habit to always place a simple watermark on all my photos during Export. When i was using LR3 this always worked, but when I recently updated to LR5.2 the Copyright watermark does not show in my photos. I tried several repetitions exporting to .JPEG files, making sure that the Watermarking box is checked. Still, the photos do not show the Copyright symbol and my name.
Have a job upcoming which will involve a massive amount of photos, nothing to exciting, just volume. All of the selects will need to be resized to 4x7 and then have a 1x7 graphic added to the bottom each, so that the finished image fits a 5x7 (7in wide length) print. The obvious answer is to resize each photo and manually drop it onto a template of somesort in photoshop. Any better/easier/faster way to do this with 2000+ images?
I run a HP DV6 Laptop with Core I7 and Windows 7. While editing my photos my computer appeared to over heat (which is a recurring issue that I'm working to resolve) during mid-post production. Upon restarting my computer, and when I accessed the same photos, I got a very lengthy loading icon when I clicked on a photo under the "Develop" tab. This problem recurred and in attempt to resolve the problem I decided to delete the library and re-import the files. Upon re-import, I cannot view all the photos in the library grid view. I'm not sure if my files are now corrupt from the sudden crash or is it just a data issue with LR?
I've attached a screen shot of what the problem library looks like...
A big bummer that in the library grid mode (or any other scrollable part of lightroom) I can't scroll with my touchscreen monitor like I can in IE or Chrome or Word etc.?? What is touchscreen compatible in lightroom? I would love for lightroom to be touchscreen friendly.
Change to the grid view and resize the LR window by double-clicking the frame title - the window will be resized but the grid view is not updated -
maximing the windows --> blank area to the right of the thumbnails (the images in the grid view)press tab two times to if fix the problemrestore the window--> some thumbnails are only half visible or not visisble at all because there is no horizontal scrollbar and the thumbnails have not been wrappedpress tab two times to if fix the problem
I think I did not have this issue with LR 3.5 - or same problem with LR 3.6?
I add five photos to a folder in Lightroom 4.3. The photos are in the specified folder in Windows. Import shows the five photos as imported but greyed out and semi-highlighted. Library does not show these five photos. What can I do?
I just installed Lightroom 5, and I can't seem to select the middle grid photos. There are also times when I can't select the outer grid photos or can't scroll within the grid. It is almost like the program isn't recognizing that my cursor is hovering over the photo. This doesn't seem to be effecting the selecting of photos in the horizontal strip at the bottom of the page. I'm using a macbook pro; it has the most recent OS.
A few days ago I was importing photos (RAW to DNG) and my computer locked. i had to reboot, and ever since when i import photos they will not load (preview) in Library. Also Histogram just reads "calculating", but no graph loads in. If I go to develop, the photo will load in, and I can export it with no issue. I just can't view photos in Library. also, photos imported prior to that event will load in and can be viewed in Library. Just nothing going forward. My OS is Vista and i'm running Lightroom 4.4
When i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
I downloaded LR 4 and it opens but only the LR 4 superstructure (frames, info on left side) is visible. There are no phoyos from the catalogs listed on the left side.
How can I get to my photos that are in the iPhoto Library to import them into Lr5? Clicking on the library opens iPhoto. I no longer want to use iPhoto.
I have organized all my pictures into year>season (winter, spring etc)>event. I have been using photoshop to edit and output my pictures and then taking the edited ones and loading them into iphoto which makes them as "events" I have liked this a lot. As I switch to Lightroom (something I am very ready to do), I don't see a similar grouping feature. It seems you can make key words or collections, but I don't see an automatic grouping system that would nest photos from events (ie taken on the same day).
I am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
It seems like a simple enough request, but I'm just not seeing it. When I export (from Library) I want all the photos and snapshots of each to be exported. Is there a way to do this? Or, do I need to make virtual copies of each snapshot, THEN do an export?
This is a recent development. I publish photos to Flickr, Smugmug, etc., and today, I cannot see any of them in the grid view. They DO show up in the filmstrip, but they don't show up in the grid. So, I cannot select, nor can I publish newly added photos.
If I go to Edit and choose "Select none", they are deselected for a a few brief seconds and then highlighted again. If I go to another photo, it leaves one of the previous photos selected and also selects the second photo. I've tried restartting Lightroom, restarting Windows 8.1, all to no avail.
I basically want to know if the graphic grid system can be used to create design for web pages. Ive found a good book on amazon-
Grid Systems in Graphic Design by Josef Muller-Brockmann , Josef Muller-
Ive been designing websites for a while now, Mainly using html and css for layout. Ive just got in to flash and now find it quite hard to lay my pages out so they look clean and professional-
Is there a procedural way to download my photos to LR3 instead of Image Capture on my iMAC? I had Apple Store Geniuses fix the Safe Mode problem (which i posted in a different thread) so when I got home and tried to download my photos from the CF card reader it showed up in the Image Capture screen but not in LR3. I had the CF card reader attached to the computer's USB port before turning on the computer.
Should I have turned on the computer first and then open LR3 before connecting the card reader? My guess is that because LR3 was not opened first, the downloading went somewhere else.
I can't use the library filters in collections as they return no results despite there being valid search criteria. Images with one star rating are not shown when filters are set to rated in the collection. The filters do return results when searching in collection sets however.