I just installed Lr3 (was using 2.7) and CS5 (was using CS3). From Lr I took an image to retouch in CS5 and when it came back to Lr it looked terrible - the exposure had changed at least a stop and I did not do that in PS. I loved how I had Lr2 set up and I have lost it all. In Lr2 the edited image would automaticaalycome back with a T (for tweaked) added to the name and look like it did when it left PS.
View 7 RepliesImage Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.
running AutoCAD Civil 3D 2012. From the beginning of my course I’ve had CAD opening to my template; from the options, under the file tab, then template settings, I set all four of the subcategories to my template and the appropriate folders. My template is set with an engineering drawing scale. A couple weeks ago, I fired up CAD and it opened to a different template where it’s using an architectural scale. I checked my template settings in the options and they are the same. I closed CAD, reopened it, and have gotten the same result since then. When I open my drawings that I’ve been working on the scale goes back to engineering or if I manually open my template, it is an engineering scale as well. Is there another area that controls how CAD opens besides the options for templates settings? I really don’t understand how that could have been changed in the first place since we have always used our templates from the first week of class.
View 3 Replies View RelatedI tried the HOME key, but nothing happend.
How can I go to the first or last image without pressing for several minutes left or right arrow?
When I first load photos into lightroom I get a quick preview than looks like a JPEG? A second later after the image has time to load the color will change. I'm guessing that I'm seeing a JPEG preview then I'm getting what the RAW image looks like? If that is the case, is there anyway to get that preview color back without exporting as a JPEG?
View 1 Replies View RelatedI exported an image from LightRoom to Photoshop to edit it. After saving it in Photoshop and closing, I went back to LightRoom and couldn't find it anywhere. Usually it's in the same folder as the original. I also can't find it anywhere on my hard drive or in recent files in Photoshop. I know it saved it because it was a huge file and I had to wait for it to save before photoshop would close.
View 2 Replies View RelatedHow do you get back to your original image after you have made adjustments, closed Lightroom, made more adjustments, closed Lightroom etc?
View 4 Replies View RelatedHow can I get multiple images on 1 page to line up when printing on both sides? Dimensions are 3.5x2.5, 9 to a page. They are sportscards for son's baseball team. They are slightly off by 2-3 cm on all 4 sides and in betweeen. Extremely frustrating. I tried printing in Photoshops but text is blurry. In Lightroom, Images look absolutely perfect. If they would only line up. Using a Canon MG 6200 if that matters.
View 7 Replies View RelatedI would love to be able to export my image from 3d spherical panorama back to the complete Image. Raster image clips the image. Photoshop 3D is great for retouching the nadir (bottom) a spherical panorama image.
View 2 Replies View RelatedI have been trying to crop a section of a given size from a photo along with a 1px border (379 by 285).However when I try to do this the resulting image is 378 by 284. I also wanted to have a slight curve at the corners but can't see how todo it in this version.
View 9 Replies View RelatedI've got a dodgy Google Earth screenshot that I've chucked into CAD to scale it (approximately) and more importantly align it to the correct coordinate system as per the survey. However, I need to use that image in another modelling program (which only accepts image files).
Question is - is it possible to export just an image from Autocad back to an image file? I obviously don't want to plot the entire drawing to PDF/BMP or anything, simply extract the image that I have resized. Or any other way of getting an image from Google Maps or the like and scaling it correctly?
When I try to place a picture in photoshop CS6 either from drag&drop in the application window or from the place command, my image gets automatically resized based on the resolution (pixels per inch) of my document.
Example:
I create a new blank document, 1000*1000px @ 300ppi.I have another image that I want to place in the document and this image measures 500*500px @ 100ppi.I then go to File->Place and the image that appears is way too big. In the Info panel, it says that the image is 1500x1500 and the transform settings at the top indicate that the image hasen't been scaled because both width and height are at 100%.If I cahnge my document resolution (no resample) to 100ppi, the image has the right size when I place it.
Is this normal? Because it has never done that with past versions of Photoshop. If it is normal, is there a way I can change this because placing an image based on it's physical (printed) size makes absolutely no sense. 1 pixel = 1 pixel.
I was trying to resize some images to 1080 x 1920 (tiff) using Image Processor but the resulting images came out as 1080 x 1620 and the filesize appears to have remained unchanged. Similarly, another time 720 x 576 came out as 720 x 540.
View 2 Replies View RelatedWhen I go to send a pic to Photoshop to edit, it is looking at CS4, not CS6. How can I change this? I had a blue screen and had to rebuild everything and now it is wrong.
View 1 Replies View RelatedLR 5.3 selected PS 4 as my external editor. How do I tell it to use PS 5? I use Windows 7.
View 2 Replies View RelatedThe colors of my cr2 files are wrong in the developement part of Lightroom. Dark pixel are turnes into blue ones, bright/white pixels are turned into red ones.
The problem does not occur if I only watch the pictures in the libary mode
I imported photos and forgot to update the last destination to the new one I created for the new photos. So, they got imported into the last folder I imported the previous set to. I want to move them to the proper folder, but I am afraid to use the "move" option because it says it will move the photos and then delete the previous folder. The folder has the previous set of pictures that I saved there and I don't want to lose them. How do I move a selective set of my photos from the folder to the new on I want them to reside in without losing the set that were in that folder previously and were saved properly?
View 4 Replies View RelatedAfter downloading Lightroom 4.4 (Mac) I see only the lenscorrection for the Fuji Finepix X100 and not my camera the Fuji XE-1.
View 1 Replies View RelatedI just bought Lightroom 4 and used "move" instead of "add" when importing photos from my photo files on my HD. Can I reverse this by using export?
View 2 Replies View RelatedI seem to have a big (and very weird) problem with dates in Lightroom. This relates - for the moment at least - to images dating back ten years, to when I had my first digital camera, a Nikon D100.
My belief is that the photo in question, one of many, was taken at around 2pm on the afternoon of 17th April 2004. Note the following from the image (EXIF data):
- The "date/time original" shows 17/04/2002 13:58:48
- The "date/time digitized" shows 17/04/2004 23:15:29
- The "date/time" shows 17/04/2004 23:24:17
The same image in Windows explorer (see second image) shows:
> Date 17/04/2004 23:15
> Date Taken 17/04/2004 23:15
> Date Imported 17/04/2004 22:24
Given the subject matter of the image, it is 100% certain this image was in fact taken in April 2004.
How can it be, then, that the "original" shows a date two years earlier? Why would Lightroom use this field (the ONLY one showing 2002 when every other shows 2004)? And why does Explorer correctly show the date but Lightroom does not - surely if anything one might expect the opposite?
This is urgently needed to be resolved as I am making a photo book for my wife's 40th and, as it turns out, I am putting all the photos in all the wrong years!
And so does the export. I'm on a Mac.
Premiere is fine, but not Lightroom.
When I enable lens profile correction, choose default, auto or custom, LR5 will assign Tamron 28 75. However, the correct lens is the Tamron 24 70 (nikon). I checked my Lightroom 5 lens profiles list and the Tamron 24 70 is listed. How do I get LR5 to recognise the correct lens?
View 2 Replies View RelatedTake a picture with my Canon EOS 1000D (RAW)Import to LR5 as DNGAdjust the settings just the way I like itExport to a folder on my Windows 7 PCFile format: JPEGColor space: sRGBSync that folder to my iPad using iTunesView the image on my iPad and the colors are all wrong:It looks like my white balance was set too cold. I used to use Canon Digital Photo Professional (DPP) and never had these issues. I spend this whole evening trying to find a solution to my problem but for nothing. What can I do? Did I waste 80 € on a software that is useless to me!?
View 10 Replies View RelatedI am trying to print a landscape oriented image. I choose an 11 x 17 paper size (entered as a custom size) to accommodate the print.
In Page Setup I choose landscape mode. On screen the paper is landscape but the image is vertical. When I choose vertical mode, the paper is vertical but the image is horizontal.
I try to switch width and height in Manage Custom Sizes but it only makes the opposite happen from the above scenario.
When I print, the paper is vertical with half the image printed horizontal.
Do the following
- Open LR 4.0
- Chose a Collection set
- right click, "Create new Collection"
- The collection is created in the previous collection set and on in the one selected.
To me. It is more logic to place the new collection in to the selected collection set and not next to .
i have to admit i rarely printed from LR before.most of the time i print from photoshop.but yesterday i had to print a lot of small images so i thought i try LR for it.
i wanted to print a few 35x45mm images on DIN A4 paper.
images dimensions are correct (35x45mm 360 DPI) and it prints as 35x45mm images when i use photoshop.
when i use LR and i set the cell size to 35x45mm the prints come out to small by a couple of millimeters.
LR has not so many print settings i could have messed up.. right?
I'm a new user of LR-5. I converted my catalog from PSE-11, and noticed ( after using the catalog for several days) that many of the capture dates are wrong. They were right in PSE-11. I use an HP PC, Windows 7 Home Premium 64-bit Service Pack 1. What did I do Wrong?
View 5 Replies View RelatedI've been importing lots of photos from my hard drive into lightroom and been moving/renaming them in the process. I only got lightroom a few weeks ago.
This has worked fine but i've recently imported a few hundred photos off my iphone and doing the same thing - move and rename. The trouble is, these photos keep going into the 2009 folder, instead of the 2012 or 2013 folders that they should be. When i look at the photos, they have the correct name, and the capture date seems to be correct, its just lightroom keeps wanting to put them in the wrong folder by year.
naturally I want all my photos sorted into the right date folders as this is the way ive decided to organise my photos...
I'm trying to lay out an 8x10 cell in LR5. My page is a custom package and set up as an 8.5x11 sheet . When I click to add an 8x10 cell, I only get a cell that is ~ 8x8 and I have to drag the bottom down to 10".
View 2 Replies View RelatedI am having trouble with Lightroom 5 exporting images at incorrect file sizes. For example, if I use my export preset for images with long edge 2500 pixels and maximum size 1000k it is exporting images at 1500-2500k.
View 7 Replies View RelatedMy rig includes Windows 7, Asus P8Z68 Deluxe Gen 3 with i7 2600K, 16GB DDR3 mem, SSD drives, fast Radeon video card.
I'm using Lightroom 4, just upgraded, have this problem: when I export to Folder1> Subfolder 1, it puts the export images in the next up hierarchical folder, i.e. Folder1. I select the folder I want in the Export dialog, and I don't have any subfolders selected or created, but it always sticks the shots in the next folder up the tree, it's happened every time I've exported.