Using Lightroom 5 I made several changes to a photo. One of the first changes I made was to crop. I now find I cropped too much. Is there a way to copy or save the several correct changes and redo the crop? Is there a way to start a new copy of the photo with some of the changes from the first copy?
View 4 RepliesI can only see how to delete the entire history in the history panel. Is there a way I can remove only selected states? I am using LR 1.4.
View 6 Replies View RelatedIs it possible to make a VC where the copy hase the detail of the changes made to the original.
Currently, all the changes are in the copy, but the detailed history of changes is not there. This precludes making the same backward steps that one could do with the original.
I'm trying to take some writing from one image and paste it onto another photo.
View 1 Replies View RelatedIs it possible to copy and paste part of an image in one photo to another in LR4? I have a pc.
View 1 Replies View RelatedI have a folder of all my photo's with my Sony NEX camera - which I have set to capture RAW+JPEG, so the folder contains a RAW and JPEG copy of each photo.
I've just started using Lightroom and run an import on that folder with 'Copy as DNG', discard duplicates, with the destination directory structure set to use photo dates. The source and destination folders are both on remote directories on my NAS.
After the import I expected to find lots of folders, ordered by date, containing just DNS files. However I find there are DNG and JPEG files for each photo.
My understanding is the standard previews and smart previews are stored locally with the LR catalog. So what are the JPEG files that have been created?
Photoshop CS6 13.0.1
I generally use layers in Photoshop for cloning and healing. Unfortunately, every so often, I jump into PS and forget to create the layers before I race off and start cleaning up. I may go 50 steps of cloning or healing before I remember I'm on the background layer instead of the clone/heal layer........ Which causes me to utter profanities under my breath.
is there any way for me to do a bunch of cloning, then realize I forgot my layers, CREATE the layers, then grab the previous history steps, undo them from the background layer and redo them on my clone/heal layer?
Is there any reason history in Photoshop can't be made persistent like it is in Lightroom? It would sometimes be useful to end a session, go back into PS later on the .psd file and be able to have the previous history.
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
View 2 Replies View RelatedI am trying to learn layers and layer masks. I loaded an image, than control J to duplicate it. I then added a layer mask. Everything good so far. I then went to filters chose a blur. Then went to brushes with black as my foreground color, I just wanted to brush away the blur, and got an error message. "could not use the history brush because the history state does not have a corresponding layer."
View 3 Replies View RelatedEverytime I try to use my history brush, that error pops up and I have no clue why. If I try to just open a blank document and use the brush it does not give me this error and I can "use" the brush but you cant see anything on the project.
so when this error happens im trying to do a project and say I place a file(picture) into the project and this is the very first thing I do. I place it, then I size the image down some. I then make a new layer to use the brush for behind the picture and then this is when I get the error. I have no clue what is wrong
How do I copy one part of a photo and paste in another part of the same photo. element 12
View 2 Replies View RelatedHow do I get my history files from my old computer to my new one?
View 1 Replies View RelatedI would like to know if there is a way to see the names of the brushes used in the History Panel?? All it says is "Add brush stroke" I that if you click on the brushes dots on the photo that you can see which brush is used, but I hate editing with those on, so I turn them off. Which means I have to do several clicks just to see what brushes I have already used. It would be so useful to just be able to see in my history which ones I used especially when you have to stop editing before you are totally finished with the photo and come back to it later.
View 7 Replies View RelatedI am using Lightroom 3.4.1 and Windows 7. Upon shutting Lightroom down I got a message that Lightroom was unable to backup my catalog until it was repaired. When I reopened Lightroom it gave me the option to repair the catalog. The repair was "successful" and Lightroom opened as usual. However, the history panel of every single picture is blank BUT the pictures did retain my Lightroom changes. How to get that back? I do have a catalog backup but it does not include the work I just finished as I was shutting down Lightroom. I also have all my RAW files as well as their sidecar files.
View 2 Replies View RelatedI just installed LR4 and opened a catalog that was created in LR3. There is no history showing in LR4. How can I get LR4 to show the develop history.
Mac 10.6.8
I know it's in my catalog in the back up, but is there an easier and less data heavy way to move this data?
I only ask before previous iterations of LR had the develop history in the XMP data but it's changed location. I hand off my edits to a supervisor who oversees the final pass before it reaches a client's hands and he like seeing my work progress and teaching small corrections (as to tune to his studio image standards). It hasn't been a problem for a long time but he recently found the lack of develop history.
LR5 Win7. I open a previously edited image in Develop module. I click on the first step of the history ("import...."). Immediately, all the history steps disappear, and a new step appears, "Post-crop vignette style: paint overlay." There are now just two steps in my history. When I try to click on the first/origial step, LR doesn't let me do that, it immediately jumps to (highlights) the "post-crop..." step. If I go to the Effects panel, the only option under style is "paint overlay." If I add a few more edits (change color, etc.) they work fine. But as soon as I click on the first history step, the same thing happens again.
Update as i work on this: if I click on ANY previous step in the history, LR adds the "Post-crop..." step at the top and does not then let me click on any previous step.
This does not happen with photos I have edited recently. It only happens with previously edited photos. I think it only happens with photos with 2003 or 2010 process, but it doesn't happen with all of them.
Then I tried opening one of these photos in the Develop module. I create a virtual copy, then go back to the original. I click on the first history step in the original, it does this strange thing described above. If I add more history steps to the original, then click on the first step, it also does this strange thing. However, if I add edits to the virtual copy, then click on the first step, it does not do this strange thing.
What I have tried:
-I have opened and restarted LR.
-I have gone back to a catalog from a few days previously and it exhibits the same behavior.
-I have tried updating the process before clicking on the earlier step, and this does not prevent the behavior.
I wanted to try to re-install LR, but when I try to download it, I get this message, "We're sorry, something seems to be wrong on our end. Please try again later."
For the second time, which is two times too many, I've found myself browsing through images and noticed they were all starting to change. Essentially I've apparently instigated a sync settings command to too many images and it wasn't immediately noticable when it happened so I couldn't just do a Ctrl-Z to undo it. I want to make sure I'm not missing something that would allow me to sync all selected images back a step in History. I would think this would be an easy enough feature to add to any version of Lightroom (using LR3 for now because I'm waiting for the LR4 I purchased to get an update that might speed it up). I've checked out auto script programs but they're a bit unweildy and frankly Lightroom should have that feature available.
View 4 Replies View RelatedI understand Lightroom 5 does not change the original image; instead it maintains a delta-like file within its catalog. When, in Lightroom 5, I select 'edit in Photoshop CC' and make changes then return to Lightroom 5 does Lightroom 5 delta those changes in its catalog or is the original image replaced?.
Also, in Lightroom 5, when I go back using 'History' and find a version I like; how do I lock that in. That is how do I ignore/delete the most recent changes I no longer want?
Say I have a file with the following history:
Export
Crop
White Balance: Custom
Auto-Tone
Import
If I then import the exported file, the copy has all the changes but none of the history. If I don't like the crop or any of the other previous changes, I can't revert back to the original file. How do I go about exporting file history?
Can I transfer/save my history from a trial package of Lighroom 3 to a purchased Lightroom 4?
View 5 Replies View RelatedI'm using Lightroom 3. When I pull up a DNG image that I had edited and exported as a DNG, the image doesn't show any of the editing history. How do I get this history to show for DNGs so I can make changes to that editing history?
View 25 Replies View Relatedhow to create a new polyline which vertex is from a old polyline. My code seems have a copy a polyline in debug, but I can't find the new polyline in AutoCAD,why?
The code is below:
[CommandMethod("CopyPartPolyline")]
public void CopyPartPolyline()
{
[Code].....
It's probably the best to explain my problem with a picture
The background of the text was transparent (Y'u know, white/gray dotted thingy) but when i copy it, it keeps copies the transparent part with it and... Yeah... How do i copy without the transparent part?
I am using Lightroom 4 and developed a picture in it last week. I saved the picture onto my desktop and sent it to my client. She loved the way it looked and wants other pictures to look the same way (tone/cold color, etc). I did not save the history as a preset before I exported it out. How can I get the history back from when I worked on it last week? Is it stored in the pictures data somewhere or do I have to try and recreate the image adjustments??
View 1 Replies View RelatedI have installed the new Beta for Lightroom 4. It is unable to use or import from the existing LR3 catalog so I've had to create a new one.
Aalthough the most recent adjustments have been applied, I've lost the history and also attributes such as flags and ratings. This also happens when in LR3 I've imported images from aother LR catalog.
No one seems to understand what I mean but I can't explain it any more clearly!
I would like to find a way to restore the history or record of adjustments for each image. They must be saved somewhere as LR3 had them.
I'm using Lightroom 3.6
I have a large catalog of images I have touched up to prepare for use.
Today when I loaded the catalog, every image has a 'reset' at the top of this History stack. This is undoing all my modifications, but all the operations I did perform are still listed under that.I want to remove the 'reset' from the top of History of every image in this catalog so I get back to what I had already done.
I am trying to edit the history after making some changes in Develop.
I have highlighted the last (ie top) entry in "history" and used CTRL and Z.
I get the "undo" message on the screen.
However, the bit of history I am trying to get rid of stays there.
It was working fine yesterday.
Manage image history and snapshots?
View 5 Replies View RelatedPhotos now have presets on them but I can't access original image in the history. How can I do this?
View 1 Replies View Related