Is it possible to make a VC where the copy hase the detail of the changes made to the original.
Currently, all the changes are in the copy, but the detailed history of changes is not there. This precludes making the same backward steps that one could do with the original.
I have an image from a 7D to which I have only applied Enable Lens Profile, Remove CA, Constrain to warp, Manual Vert Perspective and Crop with Constrain Aspect Ratio Switched off.
The cropped dimensions of this image is now 2763 x 4472.
If I copy all settings and paste to a fresh untouched virtual copy of this image the resulting size is 2752 x 4453. The shot is part of a bracketed tripod shoot in AV mode, if I copy and paste to the other two untouched images the resulting size is also 2752 x 4453.
I need to make a series of subtle corrections to match an output. I want to use Virtual copies. But I can't see how I can for instance label copy 1 "Reduced Saturation" or "-10 Clarity"
With several VCs of the same original image, If I try to change something in meta data it copies over to its siblings as well.
Just upgraded Lr 4.2 to 4.3. Where is "make virtual copy the master"? It use to be a selection in the "Photo" main menu.
View 4 Replies View RelatedIn Windows Lightroom (3.5 at the moment), if I select one or more images and then, on the left, right click and create a new collection, I'm given the option of creating new virtual copies of the selected images for inclusion in the new collection. I use this all the time.
However, once the collection is created, I've not found a simple, one-step method to add virtual copies of additional images to that collection. Best I've come up with is the three step process: create a virtual copy, drag the virtual copy to the collection, and then remove the virtual copy from the folder/collection where I created it. It would be far cooler if there was, say, a keyboard shortcut, e.g. alt-click-drag or something, that would do this all in one step. Is there such a method?
I've completed a book and want to make sure that when I return to it, the pictures which will appear only if the edits I made at the time I published the book. I find a "create virtual copy" option when first saving a book, but am a bit befuddled as to how to ensure the book is associated with the correct copy of the photo upon subsequent saves.
View 7 Replies View RelatedWhen I import images into Lightroom 3 on my iMac I do so as DNG. Do I need to make a Virtual Copy of an image before I begin editing it? Is the imported DNG the Master and it will not be touched by editing, and is it safe or do I have to back it up on my hard drive---or is that done automatically?
View 4 Replies View RelatedI sometimes use a trick of creating a virtual copy to get a text element of a NxN image. For example, I might use 8 images for a 3x3 and need a fourth "image" (i.e., column 1, row 2) for text. I like to take image 3 and make a virtual copy, then get that looking the way I want as my text box. When I print, I don't have to create a collection to order my images as long as the sequence-taken, along with the text box in position 4, is okay. I guess in LR 3, the virtual copy sorted after the original.
Well, I just tried the trick and the virtual copy comes before the original. I still wanted to shy away from creating a collection, so played another trick - I used the option to change the capture time under the Library module's Metadata menu, and bumped the text box up 1 second later. But the sort hasn't changed! I even forced a reconsideration of the sort by changing from capture time sort to added time sort, then back again.
Though I'm being "devious" here, it does seem to not be working correctly. Maybe sorting ignores metadata of virtual copy images?
In LR 4, I have created a virtual copy for the purpose of cropping, but when I crop it in Develop, the original image is getting cropped as well. Have I misunderstood something?
Mac OS X 10.6.8
Using Lightroom 5 I made several changes to a photo. One of the first changes I made was to crop. I now find I cropped too much. Is there a way to copy or save the several correct changes and redo the crop? Is there a way to start a new copy of the photo with some of the changes from the first copy?
View 4 Replies View RelatedOnly one folder is being effected. I remove the Read only and it is reset back again.
View 10 Replies View RelatedI can only see how to delete the entire history in the history panel. Is there a way I can remove only selected states? I am using LR 1.4.
View 6 Replies View RelatedPhotoshop CS6 13.0.1
I generally use layers in Photoshop for cloning and healing. Unfortunately, every so often, I jump into PS and forget to create the layers before I race off and start cleaning up. I may go 50 steps of cloning or healing before I remember I'm on the background layer instead of the clone/heal layer........ Which causes me to utter profanities under my breath.
is there any way for me to do a bunch of cloning, then realize I forgot my layers, CREATE the layers, then grab the previous history steps, undo them from the background layer and redo them on my clone/heal layer?
Is there any reason history in Photoshop can't be made persistent like it is in Lightroom? It would sometimes be useful to end a session, go back into PS later on the .psd file and be able to have the previous history.
Is it possible by importing a drafting view or copying 2D details, to not duplicate the detail components families ? I tried many ways, but I always get my families duplicated.
Copying 'Gypsum' will always duplicate with 'Gypsum1', even if they are exacly the same original family.
I can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
I am trying to learn layers and layer masks. I loaded an image, than control J to duplicate it. I then added a layer mask. Everything good so far. I then went to filters chose a blur. Then went to brushes with black as my foreground color, I just wanted to brush away the blur, and got an error message. "could not use the history brush because the history state does not have a corresponding layer."
View 3 Replies View RelatedEverytime I try to use my history brush, that error pops up and I have no clue why. If I try to just open a blank document and use the brush it does not give me this error and I can "use" the brush but you cant see anything on the project.
so when this error happens im trying to do a project and say I place a file(picture) into the project and this is the very first thing I do. I place it, then I size the image down some. I then make a new layer to use the brush for behind the picture and then this is when I get the error. I have no clue what is wrong
On the v.c.'s I've already made (in Develope) I get no "Delete Virtual Copy" option, only get "Create Virtual Copy" with a right click or "Delete Photos" (which then deletes all copies and the original!).
View 1 Replies View RelatedI installed LR4.4 and now it won't create virtual copies. It says it did but none show up. The show badges is still checked in view options.
View 2 Replies View RelatedWhen I create virtual copies, the total number of instances of the image goes up but I don't see any of the virtual images. I unstack and it shows they're unstacked and "1 of 2" but I still can't see the other. I've turned off all filters and still nothing.It was happening in 4.3rc and is still happening in 4.3. It is only present in certain catalogs.
View 6 Replies View Related1. Made virtual copies, count goes up, can't see them in grid in library, develop, or in loupe. Thought they were stacked, but when I went to Photo>stacking> the rest is all grayed out...can't do anything. "set as master copy" also grayed out,. Read somewhere "preferences for lightroom might be corrupt"???? I tried to do the thing in the library to correct the preferences,:(on moubntain lion 10.8.3), but in the user file there is no library...so I then looked up how to find the hidden library, but I can't find the stuff to do THAT!!! And, there IS a library on my hard drive, but when I open THAT up, there isn't anything about preferences.
I JUST bought this 2 mos ago--how can it have corrupt preferences when I only just started using it???--used it once, then discovered diddn't have right processor in old computer...bought a new computer...took several weeks to get (bought increased ram)...now I am just using for first time today. Started importing, but they are all coming up missing photoi (when I had lightroomn installed on old computer, I deleted uit and pics), then reinstalled and it was migrated over to this new computer. I looked up how to massive transfer missing photos and there is NO folder with a question mark, so I have to do hundreds and hundreds manually--can I tell you I am really hating LR4.4?
When I created a virtual copy of an image in LR3, and then I renamed the images, the virtual copies would have the new name with a hyphen.i.e if there were two virtual copies associate with the file, the renamed sequence would be as follows jcp0001, jcp0001-1(vc), jcp0001-2(vc), jcp0004
This had the advantage of keeping my file numbers in sync when I uploaded them to my online lab (Pictage) and the client gave me a file name. In LR4 renaming sequencing doesn't take into account the virtual copies in terms of the chronological # and compensating for the vcs. So the same sequence would be jcp0001, jcp0001-copy(vc), jcp0001-copy2(vc), jcp0002..This has the affect of misalignment my files with those of the online host.
I am currently making virtual copies of all my photographs converting them to black & white I am then choosing which one to keep. If I keep the original no problem, I can remove the virtual copy however if I choose the virtual copy I have to keep the original copy or export the virtual one. Is there a way I can make the original the virtual copy and the virtual the original. As things stand I have loads of photos showing in lightroom that I do not want.
View 3 Replies View RelatedI can't determine if I've encountered a bug or operator oversight. From within LR 5.2 I opened an adjusted [NEF] file in PSCC (not as a smart object) and added adjustment layers, etc. With file still open in PS, I returned to LR, made a virtual copy, changed LR adjustments, and attempted to "Edit in..." I simply get referred back to the existing canvas. I'd like to work with both, side by side, and save when I'm ready.
LR 5.2
PSCC
OS 10.8.5
I recently upgraded to LR 5 and discovered that many of my virtual copies were missing.I've found them in a previous library backup and was wondering what the best way to import them was considering that the images are dispersed over dozens of different folders.
View 4 Replies View RelatedIf you export a group of photos as a Catalog, does this export all virtual copies including their own repsective xmp data? I need to send a batch of RAW files to someone but need them to be able to see all the virtual copies as well.
View 1 Replies View RelatedIs there any way to find virtual copies in smart collections without using "copy name is not empty" ? Basically I am trying to use copy name as a version number for all images, include the base image which is the original. But this then makes it difficult to find the actual copies themselves.
View 7 Replies View RelatedBW Virtual Copies revert to Color when exported and then the BW adjustment disappears when i reopen LR.Has not happened before and i am doing a lot of BW Virtual Copies using the V shortcut, so its incredibly tedious to can back and redo each one.
View 2 Replies View RelatedI can not remember to have encountered this before, so here I go: I just created a virtual copy of some photos from my summer holiday, and all works well. But when I needed to access these photos going the Windows' way (Windows/My Pictures that is), the virtual copies do not appear in my YYYYMM folder. Going back to LR though, they will appear there with a /Copy 1 extension. RIghtclicking the VC, then "Show in Explorer" will highlight the original in the folder, the VC still not being there. Part of the frustration is that I can not remember this happening before (or maybe it has), so I'm wondering if I by accident have changed any settings.
Running LR 4.1 on Windows 7 64-bit.
I imported a large group of images from last October and 14 of them had virtual copies created from them, mainly the final copies of images I was using. When imported into a new catalog I created in Lightroom 4 beta, only the raw files came over, not the virtual copies. I do notice that they have all been updated to the 2012 process and I did not tell it to do that. I need to remove and reimport them? This could be a big problem for me as I really like to use Virtual Copies.
View 3 Replies View RelatedI'd like to give various virtual copies different filename (or add an appendage to the name) to describe their use. But changing one virtual copy changes all from the same original image. Is there any way to rename them individually?
View 7 Replies View Related