Lightroom :: Get History Files From Old Computer To New One
Mar 14, 2012How do I get my history files from my old computer to my new one?
View 1 Replies
ADVERTISEMENT
Lightroom :: 4 - How To Export Files As RAW / DNG With History
Jun 9, 2012Say I have a file with the following history:
Export
Crop
White Balance: Custom
Auto-Tone
Import
If I then import the exported file, the copy has all the changes but none of the history. If I don't like the crop or any of the other previous changes, I can't revert back to the original file. How do I go about exporting file history?
Lightroom :: How To Save Edit History When Moving Files
Oct 13, 2013How can I move pictures without losing history (exposure changes, crop changes, etc)? I have LR4 and am using DNG files. No matter how I move files (move the folder within LR, move the folder than then re-sync in LR, etc) it always loses the History. I've searched and have found numerous "tutorials" on how to properly move files but can't seem to be able to keep the History along with it (I get the last state of the image, but not the actual history itself).
View 2 Replies View RelatedLightroom :: Delete Part Of History In History Panel?
Oct 8, 2008I can only see how to delete the entire history in the history panel. Is there a way I can remove only selected states? I am using LR 1.4.
View 6 Replies View RelatedLightroom :: Transfer Files From Old Computer To New One?
Jan 27, 2013I bought a new computer and am trying to transfer my files from the old computer to the new one. I thought I had it done right, brought the photos into the new computer, and then started working away. I have now discovered, none of my .jpg photos brought over the changes made. For instance, if I go into the Develop mode, all controls are set to "0". I revisited the old computer, and they are not all set to "0" there. What have I done and how do I correct this? I'll never change computers again with Lightroom.
View 5 Replies View RelatedLightroom :: Moving DNG Files To Another Computer?
Jun 24, 2013I have a lot of photographs in Lightroom 4 on my laptop. All are DNG and tagged with keywords and caption added to each image. When I move these to Lightroom 4 on another computer keywords and captions are lost when I view the images in LR4. I thought keywords and caption were stored in the DNG-file. How do I move the files to another computer without losing keywords and captions?
View 3 Replies View RelatedLightroom :: Using Another Computer To Access A Catalog Or Files?
Aug 3, 2013I have LR installed on my MacPro and the Mac just died (graphics card issues). I'm going to just buy a new Mac, though I'm trying to figure out the best way to access everything in LR until then. All of the images and photos are stored on a separate internal drive that I can take out and access via a docking station.
1. Does the license for LR allow me to install a 2nd copy on my Mac notebook?
2. If I place a copy of the LR catalog file on my Mac notebook and plug the photos/videos drive into a docking station connected to my notebook, will everything open up?
Lightroom :: DNG Files Did Not Transfer Properly Into New Computer?
Jan 10, 2014On December 19th, I just went to Mac from Windows. Bought a new computer (OS X) and transfered files from an external hard drive. I did not do the stardard catalog transfer and had many pictures I wanted to delete, so I transferred the old pictures through the "Another Catalog" feature import. So far so good. All worked very well for 2 years worth of pictures... while I was transferring CR2 files. Did not lose any images until I hit the following snag.
I was still on the old Windows pc on December 11th when I decided to start using DNG files and started using "Copy as DNG" option for import. On December 19th I received the new computer and started the transfer process.
The DNG files (Copy as DNG) which I started using on Dec 11th did not transfer, not one image. I lost all the information for these files. The actual DNG file is fine, but all the catalog information with all the adjustments do not transfer as the CR2 files did. At first I just got an error message when I transferred the images... saying error occured. I did not know why the transfer was not happening, and on further investigation I realized that the correct transfer stopped on Dec 11th. That is when I realized it must have been because of the DNG "new" file format. I decided to just transfer one image at a time to see exactly what would happen and Lightroom5 said "the original file is not available". I then realized that when I transferred the images from Dec 11 thru Dec 19th I COPIED them from the external drive as "Copy as DNG"... which means that I was trying to transfer and copy as DNG a file that was already copied as DNG. I made this error because I had just started using that feature and did not remember to switch to just "copy" for the transfer for those dates. Could this error have caused the non-transfer of the files for those dates?
Bottom line is that I have lost all the work for that one week which included a number of images.
When I open the old catalog I see the image information but a blank space for the missing images... right next to each image it is the DNG raw file..side by side. I cannot get the old catalog to recognize the individual catalog information for each image I worked on.
My question is... can anything be done to recover that information. Missing photographs is not the problem. It appears either my error of double copy of DNG format is the issue OR I had set the preferences incorrectly somewhere. I am aware that I could have embedded the RAW file information into the DNG file, but this was not checked off in the preference menu. Could there be any comparability issues between OS X and Windows? I do not think this is the problem but just putting it out there. My greatest fear is thinking I am using DNG incorrectly and will lose everything again in the future.
BTW, the original CR2 files are not avalable to me any more... computer hard drive was erased as it appeared all the information had backed up properly. And the backup files on the external hard drives are DNG format. So no CR2 files are available at all.
Lightroom :: Transferring Files To Computer (OSX - Snow Leopard) Via USB Cable
May 3, 2012Nikon D800 + LR4 import problem with dual card system:
I am transferring files to my computer (OSX, snow leopard) via USB cable. I am using dual card system with my camera: CF and SD. I am using the "backup" option which means that the content of both memory cards is identical. NEF + NEF with identical file names.
When the camera is connected to the computer and LR4 "import" is opened, LR4 does not show "D800 1" or "D800 2" -- it shows only "D800". This means that I cannot select a card which I would like to import the files from (like I can do with D700 or D3). And most of all, LR4 reacts inconsistently on "Don't import suspected duplicates". Usually, it wants to import all images on both cards -- this means that all files would be imported twice.
At the moment, in my D800, I have SD and CF with 3 identical NEF files on both cards. "Don't import suspected duplicates" is selected. In the import window I can see that LR4 wants to import 5 files: 0474+0474 (duplicates), 0475, 0476+0476 (duplicates). So, out from 6 images it recognizes that there is a one duplicate about to be imported, but those two others are not duplicates?
Lightroom :: How To Edit Files Remotely And Separate From Host Computer
Jun 10, 2013I understand how Smart Previews work. What I'm unsure of is...will we be able to edit these files remotely, separate from the host computer? For example, I'm an image editor and I live 500 miles away from the photographer that I work for. Can they (the photographer) download the images after shooting, create Smart Previews then send me the 'Smart Preview' folder of images, I edited them on my own computer then return the Smart Previews back to them fully edited?
View 3 Replies View RelatedLightroom :: Transferring Files And Reloading Catalog From Previous Computer?
Jun 25, 2012Have new computer 64 bit with dual drives (C: 111GB, E:1.36 TB) . C. drive operates Win 7. Do I install CS 6 and LR4.1 program on E drive along with catalog including phtos? or put CS^ and LR on C: and catalog and pictures on E:
View 2 Replies View RelatedLightroom :: View And Edit Files On External Hard Drive From New Computer?
Nov 12, 2012I have been editing and saving pictures on lightroom 3 to an external hard drive while working off an old laptop. I just recently bought a new computer and installed lightroom 3. How do I view and edit the same files on the external hard drive from the new computer?
View 8 Replies View RelatedLightroom :: RAW Files Record Onto Camera CF Card And Small JPEGs Into Computer?
Oct 3, 2012Can I have the RAW files record onto the camera CF card and only the small jpegs go into the computer?
Want to shoot RAW but need the tethered computer to not slow down with ingesting huge RAW files.
Lightroom :: Starting LR5 On An New Computer And Porting LR4 Pics From A Previous Computer
Mar 15, 2014I started a new computer with LR5, and it runs fine. But, when I imported my pics from a previous computer running LR4, all the pics loaded into the new LR without any tags or processing. How can I get that info without having ot reprocess thousands of pictures?
View 1 Replies View RelatedPhotoshop :: Couldn't Use History Brush Because History State Doesn't Have A Corresponding Layer
Aug 20, 2013I am trying to learn layers and layer masks. I loaded an image, than control J to duplicate it. I then added a layer mask. Everything good so far. I then went to filters chose a blur. Then went to brushes with black as my foreground color, I just wanted to brush away the blur, and got an error message. "could not use the history brush because the history state does not have a corresponding layer."
View 3 Replies View RelatedPhotoshop :: Could Not Use History Brush - History State Lacks Corresponding Channel - CS6?
Mar 24, 2013Everytime I try to use my history brush, that error pops up and I have no clue why. If I try to just open a blank document and use the brush it does not give me this error and I can "use" the brush but you cant see anything on the project.
so when this error happens im trying to do a project and say I place a file(picture) into the project and this is the very first thing I do. I place it, then I size the image down some. I then make a new layer to use the brush for behind the picture and then this is when I get the error. I have no clue what is wrong
Photoshop :: Can't Close Files Or Quit CC - Also Cannot Delete History States
Aug 1, 2013I having trouble with closing documents and even quitting Photoshop CC. I tried the menu, shortcuts and the close button on the document frame.
Photoshop reacts to the shortcut by marking "file"/"Photoshop" in the menu when i push command+w or commmand+q but nothing happens.
I have to force quit photoshop each time. All other buttons work exept when i try to delete history states in the history panel. Nothing happens when pushing the "delete current state" button.
CorelDRAW Graphics Suite X5 :: Clean Files In Open Recent History?
Apr 19, 2011Is there a way to clean (or parcial delete) files in "FILE > OPEN RECENT" history?
[URL]
Lightroom :: Brush Name In History Panel?
Oct 12, 2013I would like to know if there is a way to see the names of the brushes used in the History Panel?? All it says is "Add brush stroke" I that if you click on the brushes dots on the photo that you can see which brush is used, but I hate editing with those on, so I turn them off. Which means I have to do several clicks just to see what brushes I have already used. It would be so useful to just be able to see in my history which ones I used especially when you have to stop editing before you are totally finished with the photo and come back to it later.
View 7 Replies View RelatedLightroom :: Copy Part Of History?
Sep 28, 2013Using Lightroom 5 I made several changes to a photo. One of the first changes I made was to crop. I now find I cropped too much. Is there a way to copy or save the several correct changes and redo the crop? Is there a way to start a new copy of the photo with some of the changes from the first copy?
View 4 Replies View RelatedLightroom :: 3.4.1 - History Missing After Repair
Jan 7, 2012I am using Lightroom 3.4.1 and Windows 7. Upon shutting Lightroom down I got a message that Lightroom was unable to backup my catalog until it was repaired. When I reopened Lightroom it gave me the option to repair the catalog. The repair was "successful" and Lightroom opened as usual. However, the history panel of every single picture is blank BUT the pictures did retain my Lightroom changes. How to get that back? I do have a catalog backup but it does not include the work I just finished as I was shutting down Lightroom. I also have all my RAW files as well as their sidecar files.
View 2 Replies View RelatedLightroom :: 4 - Develop History Missing?
Mar 7, 2012I just installed LR4 and opened a catalog that was created in LR3. There is no history showing in LR4. How can I get LR4 to show the develop history.
Mac 10.6.8
Lightroom :: How To Move Develop History
Oct 19, 2013I know it's in my catalog in the back up, but is there an easier and less data heavy way to move this data?
I only ask before previous iterations of LR had the develop history in the XMP data but it's changed location. I hand off my edits to a supervisor who oversees the final pass before it reaches a client's hands and he like seeing my work progress and teaching small corrections (as to tune to his studio image standards). It hasn't been a problem for a long time but he recently found the lack of develop history.
Lightroom :: All History Steps Disappear
Sep 17, 2013LR5 Win7. I open a previously edited image in Develop module. I click on the first step of the history ("import...."). Immediately, all the history steps disappear, and a new step appears, "Post-crop vignette style: paint overlay." There are now just two steps in my history. When I try to click on the first/origial step, LR doesn't let me do that, it immediately jumps to (highlights) the "post-crop..." step. If I go to the Effects panel, the only option under style is "paint overlay." If I add a few more edits (change color, etc.) they work fine. But as soon as I click on the first history step, the same thing happens again.
Update as i work on this: if I click on ANY previous step in the history, LR adds the "Post-crop..." step at the top and does not then let me click on any previous step.
This does not happen with photos I have edited recently. It only happens with previously edited photos. I think it only happens with photos with 2003 or 2010 process, but it doesn't happen with all of them.
Then I tried opening one of these photos in the Develop module. I create a virtual copy, then go back to the original. I click on the first history step in the original, it does this strange thing described above. If I add more history steps to the original, then click on the first step, it also does this strange thing. However, if I add edits to the virtual copy, then click on the first step, it does not do this strange thing.
What I have tried:
-I have opened and restarted LR.
-I have gone back to a catalog from a few days previously and it exhibits the same behavior.
-I have tried updating the process before clicking on the earlier step, and this does not prevent the behavior.
I wanted to try to re-install LR, but when I try to download it, I get this message, "We're sorry, something seems to be wrong on our end. Please try again later."
Lightroom :: Sync History Movements
May 11, 2012For the second time, which is two times too many, I've found myself browsing through images and noticed they were all starting to change. Essentially I've apparently instigated a sync settings command to too many images and it wasn't immediately noticable when it happened so I couldn't just do a Ctrl-Z to undo it. I want to make sure I'm not missing something that would allow me to sync all selected images back a step in History. I would think this would be an easy enough feature to add to any version of Lightroom (using LR3 for now because I'm waiting for the LR4 I purchased to get an update that might speed it up). I've checked out auto script programs but they're a bit unweildy and frankly Lightroom should have that feature available.
View 4 Replies View RelatedLightroom :: 5 History And Interface With Photoshop CC?
Dec 10, 2013I understand Lightroom 5 does not change the original image; instead it maintains a delta-like file within its catalog. When, in Lightroom 5, I select 'edit in Photoshop CC' and make changes then return to Lightroom 5 does Lightroom 5 delta those changes in its catalog or is the original image replaced?.
Also, in Lightroom 5, when I go back using 'History' and find a version I like; how do I lock that in. That is how do I ignore/delete the most recent changes I no longer want?
Lightroom :: Can Save Image History
Sep 27, 2012Can I transfer/save my history from a trial package of Lighroom 3 to a purchased Lightroom 4?
View 5 Replies View RelatedLightroom :: DNG Not Showing Editing History?
Sep 9, 2013I'm using Lightroom 3. When I pull up a DNG image that I had edited and exported as a DNG, the image doesn't show any of the editing history. How do I get this history to show for DNGs so I can make changes to that editing history?
View 25 Replies View RelatedLightroom :: 4 - How To Find Images Preset History
Nov 28, 2012I am using Lightroom 4 and developed a picture in it last week. I saved the picture onto my desktop and sent it to my client. She loved the way it looked and wants other pictures to look the same way (tone/cold color, etc). I did not save the history as a preset before I exported it out. How can I get the history back from when I worked on it last week? Is it stored in the pictures data somewhere or do I have to try and recreate the image adjustments??
View 1 Replies View RelatedLightroom :: Missing History Of Adjustments After Importing?
Jan 12, 2012I have installed the new Beta for Lightroom 4. It is unable to use or import from the existing LR3 catalog so I've had to create a new one.
Aalthough the most recent adjustments have been applied, I've lost the history and also attributes such as flags and ratings. This also happens when in LR3 I've imported images from aother LR catalog.
No one seems to understand what I mean but I can't explain it any more clearly!
I would like to find a way to restore the history or record of adjustments for each image. They must be saved somewhere as LR3 had them.
Lightroom :: Removing Reset On History Stack?
Jun 22, 2013I'm using Lightroom 3.6
I have a large catalog of images I have touched up to prepare for use.
Today when I loaded the catalog, every image has a 'reset' at the top of this History stack. This is undoing all my modifications, but all the operations I did perform are still listed under that.I want to remove the 'reset' from the top of History of every image in this catalog so I get back to what I had already done.