how to create a new polyline which vertex is from a old polyline. My code seems have a copy a polyline in debug, but I can't find the new polyline in AutoCAD,why?
The code is below:
[CommandMethod("CopyPartPolyline")]
public void CopyPartPolyline()
{
[Code].....
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
View 2 Replies View Relatedi am trying to copy 3dpolyline vertically then create another line connecting between the start of each and join all 3 polylines and close them. i got a few hundred of these so programming is key.
can't figure out what's wrong with the code. got all the codes for cloning and create the new 3dpolyline with 2 vertices ok. but just won't join.also tried to going through all the vertices of the new polyline and join. but can't figure out how to read vertices on 3dpolyline.everytime programming something always get stuck at the end. pretty used to it already.
Private Sub btn3dpolybox_Click(sender As System.Object, e As System.EventArgs) Handles btn3dpolybox.Click Me.Hide() 'select 3dpolylines Dim ed As Editor = Application.DocumentManager.MdiActiveDocument.Editor Dim prSelectionOptions As PromptSelectionOptions = New PromptSelectionOptions Dim prSelectionRes As PromptSelectionResult = ed.GetSelection(prSelectionOptions) If prSelectionRes.Status = PromptStatus.Error Then Me.Show() Exit Sub End If If prSelectionRes.Value.Count = 0 Then Else Dim acDoc As Document.
[code]....
is it possible to highlight a part of a polyline in someway?
View 7 Replies View RelatedI am copying objects to a new database and and cloning as an Entity type succesfully for all objects.When I save the database to a new file I get the attached error
'Warning: An error occurred during save....'
I have isolated this to Polylines and have tried to Process as Type PolyLine but still get the error.Here is the code I use for the polyline.(My entity processing code is identical except for object type).
Dim MyPolyLine As DatabaseServices.Polyline MyPolyLine = CType(myObjID.GetObject(DatabaseServices.OpenMode.ForRead), _ Database Services.Polyline)Dim NewEntity As DatabaseServices.Polyline = CType(MyPolyLine.Clone, _ DatabaseServices.Polyline)NewEntity. Set Database Defaults(NewDB) NewBTR.AppendEntity(NewEntity)NewTrans.AddNewlyCreatedDBObject(NewEntity, True)NewEntity.Layer = MyPolyLine.Layer NewEntity.Linetype = "ByLayer"NewEntity.Material = "ByLayer"
How do I copy one part of a photo and paste in another part of the same photo. element 12
View 2 Replies View RelatedI am trying to copy a part that is in my assembly drawing and then place multiple instances of that part at equally spaced distance between each other. I can copy the part but i don't know how to place the copied part at the distance i want to place it in.
View 2 Replies View RelatedCopy custom iproperties from one part to the other - possible?
View 6 Replies View RelatedIf you want to re-use a Frame Generator member in ANOTHER assembly to save creating more files you might want to use copy-paste.If you do then you find you can't delete this member or other ones that have been copy-pasted into that assembly.
Oddly enough if you use "place component" you CAN delete it.I am using Inventor Professional 2014 Service Pack 1 Update 1.
I try to copy a color with a custom texture to a part. In my data source I use a scale for the image between 0,1 and 1. (10-100%). On my form I have a slider to change the scale between this range.
But in the styles editor it is possible to go to 1000%. Is that also possible in the API?
I recently downloaded a .SAT part from 3dcontentcentral.com and i would like to use it in an assembly i am creating. Problem is, once i pulled it into Inventor, I am unable to edit the part to match the dimensions necessary for my assembly. How do i go about editing this part? Is there a way that i can copy the components of the part and paste into a new drawing, save as a normal part, then edit? I have attached a screenshop of the part so you can see the Model tree.
p.s. I would simply redraw the part, however i am having a lot of difficulty getting it to look as i want it to.
I have an assembly with a few parts inside and want to create a new part(hose) in the assembly and link some faces from other parts within the assembly to my new part to show the routing of the hose.
Can I link faces within an assembly to one of the assembly components.
I created a spreadsheet of about 40 rows to be used to create different parts. I then created a part "we'll call it Board_A". I linked to the spreadsheet and used 3 of the fields for my dimensions. Lets say I named the length (which was the extrusion number) as "Len_1". I saved it and all is well!! I then created other parts and used the spreadsheet for the dims. I then went back and opened "Board_A" and saved a copy as "Board_B". I closed Board_A and opened Board_B. I then rt clicked on "Extrusion" so I could change the length from "Len_1" to "Len_1_A" which is another row (field) on that same spreadsheet which is still linked. When I tried I received a message that said I couldn't do that (I forgot the actual message!) I clicked the Parameter icon and the only fields showing on the popup spreadsheet box were the ones I had previously used for those parts that I made from scratch. I thought I figured this out once but if I did I forgot. I deleted the spreadsheet link and then re-added it but nothing I have tried has worked. Is there a way to get these fields to be usable with a Copy of an existing part or do I just have to start from scratch and make the similar part?
View 1 Replies View RelatedI need a simple iLogic code that lets me copy iProperties of my choosing from my assy and to a Part, and grab som iProperties from my part and put into Assy iProperties.
the Assy and part are always named the same, and placed in specific folder, so i can easily locate the files.
I have been searching the forum without finding anything i have the skills to adjust to my needs...
It should be like this..: (not written in correct code but you´ll get my point.. )
'Get partnumber from active assy or part, depending what you have active
PartN = iProperties.Value("Project", "Part Number")
'Defining Assy file
Assy = "M:80000" & PartN &".iam"
'Definging Part file
Part = "M:80000" & PartN &".ipt"
[Code] ..........
If only i knew what to write in the above lines it would work
here's a macro I wrote to copy the filename to the Part Number iProperty for all parts and sub-assemblies contained in a top-level assembly. I wrote this after using a bunch of custom iParts and all the Part Numbers were the same for each part! (my fault of course, but a pain to fix one at a time).
Public Sub SetAllComponentPartNumbersToFileName()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = GetActiveAssembly
If oAsmDoc Is Nothing Then Exit Sub
SetAssemblyComponentPartNumbersToFileName oAsmDoc
End Sub
[code]....
It's probably the best to explain my problem with a picture
The background of the text was transparent (Y'u know, white/gray dotted thingy) but when i copy it, it keeps copies the transparent part with it and... Yeah... How do i copy without the transparent part?
Using Lightroom 5 I made several changes to a photo. One of the first changes I made was to crop. I now find I cropped too much. Is there a way to copy or save the several correct changes and redo the crop? Is there a way to start a new copy of the photo with some of the changes from the first copy?
View 4 Replies View RelatedIs there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedI would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedDue to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
I want to copy color from one part of photo to another. This means filling a pallette with the color in the first part, then painting to the second. How do I do this?
View 1 Replies View RelatedI have one image that has a specific texture I want to reuse for my own custom image, but I'm not sure how to use it in the paint brush while working on the other one. Can I do it the way I described?
View 2 Replies View RelatedI want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedIs there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
I've tried using GIMP many times, yet I've accomplished very little, given all of GIMP's functionality. For example:
If I want to select part of an image and copy it to another area or to a new image/layer, and also FEATHER the edges, here's how I'd do it in an old graphics app I often used years ago:
1. Select the area.2. Hold Ctrl while moving selection with Move tool.3. Use the slider to soften the edges to my liking.4. Press Enter to anchor selection. Done.
And there were sliders also for opacity and other things. So very SIMPLE because the prog. was designed very intuitively. How would I accomplish the same in GIMP? Well, most of the time, I WOULD ACCOMPLISH NOTHING! At best, I'd enter values into the box, not like the result, enter new values, repeat. And that's on a good day.
Somebody write a SCRIPT/PLUGIN that allows the use of sliders exactly as described above! I desperately want to be a HAPPY GIMP user, but I'm growing ever more hopeless. I don't want to turn on my older PC just to use a graphics app that actually lets me get things done.
I'm trying to take some writing from one image and paste it onto another photo.
View 1 Replies View RelatedIs it possible to copy and paste part of an image in one photo to another in LR4? I have a pc.
View 1 Replies View RelatedI have a folder of all my photo's with my Sony NEX camera - which I have set to capture RAW+JPEG, so the folder contains a RAW and JPEG copy of each photo.
I've just started using Lightroom and run an import on that folder with 'Copy as DNG', discard duplicates, with the destination directory structure set to use photo dates. The source and destination folders are both on remote directories on my NAS.
After the import I expected to find lots of folders, ordered by date, containing just DNS files. However I find there are DNG and JPEG files for each photo.
My understanding is the standard previews and smart previews are stored locally with the LR catalog. So what are the JPEG files that have been created?
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)