I want to copy color from one part of photo to another. This means filling a pallette with the color in the first part, then painting to the second. How do I do this?
View 1 Replies
I try to copy a color with a custom texture to a part. In my data source I use a scale for the image between 0,1 and 1. (10-100%). On my form I have a slider to change the scale between this range.
But in the styles editor it is possible to go to 1000%. Is that also possible in the API?
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
View 2 Replies View RelatedFor this example let's take in account that I have 2 identical in every aspect copies (meaning size and content at this point) of the very same image.
1st remains unedited,
2nd is edited only as far as concerning the image > adjustments menu through changing mostly channel mixer, selective color, saturation etc values and had an object attached to it atop of the original depiction before being edited as a whole.
What I want to do is to edit the 1st image, compare in some certain ways the colors of it I guess with the ones of the 2nd, match for instance where color hex value X (and horizontal/vertical X,Y coords - is it needed in order to be more precise and avoid mistakes?) (I guess again) from the 1st image is edited into color (or even additional settings atop of that?) hex value Z, do that automatically for all the combinations and immediately apply the same changes I applied from 2nd pic when unedited (and looked exactly like 1st pic) to the very same 2nd pic in start, TO the 1st pic in the present case. Also in order to do this "color matching" before applied or not I need to set out-seperate the area where I have added an additional object in the 2nd picture and fill it possibly with the original content from the 1st(can it be done in one move) in order for the process to be complete?
That means I turned the 2nd image into a combination of blue-green-red colour (and other) from orange-yellow-cyan (just an example) I want to do the very same to my 1st pic which is orange-yellow-cyan etc.
How do I copy one part of a photo and paste in another part of the same photo. element 12
View 2 Replies View RelatedI'm familiar with different techniques on how to turn a color picture to black and white, but I was curious as to whether or not there were ways to turn color pictures black and white, while certain parts remained in color (like Sin City).
View 6 Replies View Relatedhow to create a new polyline which vertex is from a old polyline. My code seems have a copy a polyline in debug, but I can't find the new polyline in AutoCAD,why?
The code is below:
[CommandMethod("CopyPartPolyline")]
public void CopyPartPolyline()
{
[Code].....
It's probably the best to explain my problem with a picture
The background of the text was transparent (Y'u know, white/gray dotted thingy) but when i copy it, it keeps copies the transparent part with it and... Yeah... How do i copy without the transparent part?
Using Lightroom 5 I made several changes to a photo. One of the first changes I made was to crop. I now find I cropped too much. Is there a way to copy or save the several correct changes and redo the crop? Is there a way to start a new copy of the photo with some of the changes from the first copy?
View 4 Replies View RelatedI have one image that has a specific texture I want to reuse for my own custom image, but I'm not sure how to use it in the paint brush while working on the other one. Can I do it the way I described?
View 2 Replies View RelatedI am trying to copy a part that is in my assembly drawing and then place multiple instances of that part at equally spaced distance between each other. I can copy the part but i don't know how to place the copied part at the distance i want to place it in.
View 2 Replies View RelatedCopy custom iproperties from one part to the other - possible?
View 6 Replies View RelatedI've tried using GIMP many times, yet I've accomplished very little, given all of GIMP's functionality. For example:
If I want to select part of an image and copy it to another area or to a new image/layer, and also FEATHER the edges, here's how I'd do it in an old graphics app I often used years ago:
1. Select the area.2. Hold Ctrl while moving selection with Move tool.3. Use the slider to soften the edges to my liking.4. Press Enter to anchor selection. Done.
And there were sliders also for opacity and other things. So very SIMPLE because the prog. was designed very intuitively. How would I accomplish the same in GIMP? Well, most of the time, I WOULD ACCOMPLISH NOTHING! At best, I'd enter values into the box, not like the result, enter new values, repeat. And that's on a good day.
Somebody write a SCRIPT/PLUGIN that allows the use of sliders exactly as described above! I desperately want to be a HAPPY GIMP user, but I'm growing ever more hopeless. I don't want to turn on my older PC just to use a graphics app that actually lets me get things done.
I'm trying to take some writing from one image and paste it onto another photo.
View 1 Replies View RelatedIs it possible to copy and paste part of an image in one photo to another in LR4? I have a pc.
View 1 Replies View RelatedI have a folder of all my photo's with my Sony NEX camera - which I have set to capture RAW+JPEG, so the folder contains a RAW and JPEG copy of each photo.
I've just started using Lightroom and run an import on that folder with 'Copy as DNG', discard duplicates, with the destination directory structure set to use photo dates. The source and destination folders are both on remote directories on my NAS.
After the import I expected to find lots of folders, ordered by date, containing just DNS files. However I find there are DNG and JPEG files for each photo.
My understanding is the standard previews and smart previews are stored locally with the LR catalog. So what are the JPEG files that have been created?
If you want to re-use a Frame Generator member in ANOTHER assembly to save creating more files you might want to use copy-paste.If you do then you find you can't delete this member or other ones that have been copy-pasted into that assembly.
Oddly enough if you use "place component" you CAN delete it.I am using Inventor Professional 2014 Service Pack 1 Update 1.
I recently downloaded a .SAT part from 3dcontentcentral.com and i would like to use it in an assembly i am creating. Problem is, once i pulled it into Inventor, I am unable to edit the part to match the dimensions necessary for my assembly. How do i go about editing this part? Is there a way that i can copy the components of the part and paste into a new drawing, save as a normal part, then edit? I have attached a screenshop of the part so you can see the Model tree.
p.s. I would simply redraw the part, however i am having a lot of difficulty getting it to look as i want it to.
I have an assembly with a few parts inside and want to create a new part(hose) in the assembly and link some faces from other parts within the assembly to my new part to show the routing of the hose.
Can I link faces within an assembly to one of the assembly components.
I created a spreadsheet of about 40 rows to be used to create different parts. I then created a part "we'll call it Board_A". I linked to the spreadsheet and used 3 of the fields for my dimensions. Lets say I named the length (which was the extrusion number) as "Len_1". I saved it and all is well!! I then created other parts and used the spreadsheet for the dims. I then went back and opened "Board_A" and saved a copy as "Board_B". I closed Board_A and opened Board_B. I then rt clicked on "Extrusion" so I could change the length from "Len_1" to "Len_1_A" which is another row (field) on that same spreadsheet which is still linked. When I tried I received a message that said I couldn't do that (I forgot the actual message!) I clicked the Parameter icon and the only fields showing on the popup spreadsheet box were the ones I had previously used for those parts that I made from scratch. I thought I figured this out once but if I did I forgot. I deleted the spreadsheet link and then re-added it but nothing I have tried has worked. Is there a way to get these fields to be usable with a Copy of an existing part or do I just have to start from scratch and make the similar part?
View 1 Replies View RelatedI need a simple iLogic code that lets me copy iProperties of my choosing from my assy and to a Part, and grab som iProperties from my part and put into Assy iProperties.
the Assy and part are always named the same, and placed in specific folder, so i can easily locate the files.
I have been searching the forum without finding anything i have the skills to adjust to my needs...
It should be like this..: (not written in correct code but you´ll get my point.. )
'Get partnumber from active assy or part, depending what you have active
PartN = iProperties.Value("Project", "Part Number")
'Defining Assy file
Assy = "M:80000" & PartN &".iam"
'Definging Part file
Part = "M:80000" & PartN &".ipt"
[Code] ..........
If only i knew what to write in the above lines it would work
here's a macro I wrote to copy the filename to the Part Number iProperty for all parts and sub-assemblies contained in a top-level assembly. I wrote this after using a bunch of custom iParts and all the Part Numbers were the same for each part! (my fault of course, but a pain to fix one at a time).
Public Sub SetAllComponentPartNumbersToFileName()
Dim oAsmDoc As AssemblyDocument
Set oAsmDoc = GetActiveAssembly
If oAsmDoc Is Nothing Then Exit Sub
SetAssemblyComponentPartNumbersToFileName oAsmDoc
End Sub
[code]....
I have an area in a photo with a color distribution. I would like to copy this color distribution and Fill another area with the same distribution. Is this possible ? How ?
View 3 Replies View RelatedPS CS6
I have a document that is 8X12 with a white background.
1. create new layer
2. click on color from swatches.
3. draw a rectangle holding shift. Now I have rectangle that has a color. (Change to Pixels in options)
Can I copy that new rectangle with a different color?? Can I copy and replace that color??
Sounds simple. I can't find a method to do it!
The reason to do it this way is the rectangle will show in layer as a colored square on transparent background.
why doesn't the color in a background copy layer change even after i've chosen a new color in the color picker and that new color shows as the background color on the tools panel? This question pertains to Photoshop cs6.
View 1 Replies View RelatedWhen I copy artwork from an Illustrator CS6 RGB file and paste it as a smart object into Photoshop CS6 the colors are changing slightly. Here's an example:
RGB 234, 76, 52 (original color in Illustrator artwork)
RGB 233, 75, 52 (color of smart object pasted into Photoshop)
Why the color is changing? I need the color to be an exact match.
I have CS6 Creative Suite and the applications are synchronized using the same color settings (North America General Purpose 2). I've tried using both proccessed and spot colors in Illustrator but have the same issue with both.
Our products all have a common element that consists of a backlit blue area with black text. In all of our product photography, the blues look different (when looking at the actual products, the blues do match).
I want to go through the library and color match the blues the best I can (to Pantone 306 U). What is the best way to do this?
I'm new to photoshop cs2 but i have played with alot of video editor programs so i can catch on quick.
anyway im really into photgraphing cars. i just started photoshop and i found i can really do alot to the cars with this program.
my question is i have a car that is in the sun at an angle and the windows are tinted but the angle you can see in a little.. how can i outline the window and darken it so it looks more tinted?
I'm totally new to Photoshop and I was wondering if there was any way to get only part of a color photo black and white but keep the rest of it in color. I want to highlight some people in my pictures.
View 4 Replies View RelatedI have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
