Lightroom :: Backup Process Would Go Into Endless Loop?
Mar 28, 2012
Win 7, LR4
I have a Western Digital desktop 1 TB backup, using the WD Anywhere Backup software. I have had zero issues using this over the last three years with previous LR versions, Win Vista, and now Win 7. This issue started with the LR 4 beta, and continues with LR 4. No other issues with any other program.
I back up my LR catalog daily when exiting LR. The backup process would go into an endless loop, cycling through optimize, integrity, and backup routines. It would get almost to the end, and start over. After several cycles, LR would stop responding and quit. I would also get a popup from the Anywhere Backup software, telling me there was an error in the backup process. Another popup would tell me it had quit and offer to submit the info to WD, which I did on several occasions. I finally figured out I could complete the backup process if I paused the WD backup process, but I started getting other error messages related to WD. I have now got it down to actually quitting the WD program before opening LR, and once I have closed LR, restarting the WD program and all is well.
- I have to use Task Manage to shut LR4 down - LR4 will then not restart - Computer shutdown also stops working.
I have to pull the plug to restart.I am a current LR2 user and am upgrading to LR4. I use Win7 64bit.I looked over 4.1 RC2 release notes and saw nothing on the subject.
When I start the catalogue full backup process PS9 calculates catalogue size as 0, and stops there, offering 'cancel' or 'return'. There are hundreds of pictures in the catalogue..
hiya! so my master media library is running off a 1 tb outboard drive to lightroom and i have a 2 tb outboard drive as a master backup, i drag new media over to the drive through finder on a mac- will this be able to connect to lightroom's catalog in case of the primary drives eventual failure? is there a better way?
Any solution to the endless pinwheel in 11 Editor (updates installed)? I load a previously created PSD file, move a few layers around and the endless pinwheel appears. Have to Force Quit.
I've written a snippet that will unlock sub of sub layers up to 10 layers deep. It works fine; however I'm wondering if there is a better way to do this? I don't know that 10 is the maximum of sub layers I'll need to unlock but it's a fairly safe guess. I'd like to be more efficient and know that no matter what the layer structure of the file my script has unlocked any and all sublayers.
Is there a different approach or way to think about this problem where you can script for a potentially endless number of sublayers, and subs of subs, etc.?
var doc = app.activeDocument; var layerCount = doc.layers.length; for (i=0; i<layerCount; i++) { var currentLayerI = doc.layers[i]; var layerCountII = currentLayerI.layers.length; for (ii=0; ii<layerCountII; ii++) { [Code] .....
When i back-up the catalogue, i assumed the backup would be mede of al the tags added to photo's. When i check the catalogue-files, i see a whole lot of jpg-files. My actual photo-collection contains jpg-, raw an avi-files.
I have a habit of making a copy of all my photofiles, but now it seems double
Question: Does de backup-function of photoshop elements 11 actually make a backup of tags and photo's?
When I select MANY objects on screen with the selection floater open, the selection floater scrolls through endledss combinations of white and blue jumping up and down the list. This can take ten or fifteen minutes!!! How can I get this to act properly (other than the obvious close the selection floater before making any selections).
I uninstalled Lightroom, because it was too slow on my computer. It put a lot of library files and directories in My pictures folder.
When I use a backup program (SyncbackSE) to backup my pictures, it starts to scan all the Lightroom library files and it takes forever (hours and counting). Even though Windows cannot find the directories (with hidden and system files shown). I want to completely delete the Lightroom directories, because now I can't backup my images anymore. It is a pain in the dark places.
If LR4 backup does not backup the actual photos,and the work done in LR4, how do you back up the photos? Is online backup of the PC the only way? I do a backup each time I exit LR but if the adjustments are not backed up that is not good.
My LR4 backups took forever (130,000+ images) on a 3-year old iMac (2.93 Gig i7 Intel w/ 8 Gig RAM and OS 10.8.4), but it DID complete the backup procedure. Unchecking Optimization and Integrity Check sped up the backups considerably. Upgraded to LR5 and not backups WILL NOT COMPLETE, regardless of what is checked off or not. Longest time I've waited so far is 30 hours.
Backups have been tried to internal Mac HD, an external 2 Gig, an external 1 Gig, and a 10 Gig Drobo array. ALL fail to complete.
I have not been able to restore my catalog(s) using the Backups. My computer crashed and will not start up. So I am thinking, whew – good thing my original image files and backups are stored on a separate (and unaffected) hard drive (plus 2 additional backups of all of this). Until I tried to restore my catalog from the backups.
I am contemplating what to do with the crashed computer, I decide to check the Lightroom backups just to ensure that work fine.
.If I try to open the backup catalogs on my laptop (a separate computer from the one that crashed) without moving them from their current location/ folders (in backup folders on the hard drives) I get an error message that says the catalog file is not writable (due to incorrect permissions or because another Lightroom application is using the catalog).
If I move the catalog backup to the laptop (to a folder location that has unrelated functioning catalogs), I get a message that says the folder cannot be found. I have tried to restore 3 separate LR3 catalogs. I have not attempted to restore the LR4 catalogs yet.
Upon exiting (shutting down) Lightroom 5, we're given a choice to backup the catalog. Is there a way to manually backup it up (without exiting Lightroom 5?
Is my image backup plan fundamentally flawed? My lightroom catalogue refers almost exclusively to RAW files, but for each file, once I've done the required edits, I "export as DNG" to make a backup which has the edits embeded in. I prefer to use RAW files as the main file but I save the backup as DNG just to save a bit of space)
However, if I replace a folder of RAW files myphoto1.CR2, myphoto2.CR2 with a folder of DNG the equivalents myphoto1.dng, myphoto2.dng then not surprisingly Lightroom shows the files are missing. (At this point all I'm doing is simulating a backup recovery). I can "find missing folder" easily enough and the ? disappears from the folder list, but the individual images in the library are still missing. Again this is not really surprising because although the file names are the same as those referenced in the library the extension is DNG rather than RAW.
Now the surprising part (for me anyway).....I can "find missing file" by pointing to the replacement DNG and it warns me that the file name is not the same (because the extension is different) and asks if I want to link them anyway. I say yes and once again the image file is linked to the image reference in the library. So far so good, BUT, despite ticking the box which is meant to link neighbouring files, only the one image is linked.
Clearly if I do face disaster and need to use my backup DNGs then I can't go individually linking each and every image. Is there a quicker way, or is my backup plan fundamentally flawed?
I am very new to Lightroom I am wondering how I would go about backing up my library when I used Apple Aperture It would have a file called " Aperture Library " and I would just copy that over to my external hard drive every month. How would I do this in Lightroom ?
The LR 4.4 catalog backup fails when exiting the application. I have set my catalog backup location on a NAS hard-drive (connected via Gigabit ethernet), which has sufficient empty space and correct network permissions. An empty backup folder is created, however no catalog file is copied into it. After the backup starts and checks integrity and starts the backup, a second dialog box pops up that says do you want to back up. The first dialog box is open with the progress bar about halfway complete, but can't be made active. If I start another backup, it runs part way and says can't complete as the same as the others report.
This is strange, since in earlier versions of LR 4 (and even in LR3) I had none of these problems.
What viewing and/or editing capability will exist if the Lightroom catalog (not the full image files but only the previews) are exported and installed on a laptop? I would like to vuew the images while traveling and do minor editing but the complete image files are too extensive to transfer to the laptop. The comntempated procedure is to export as a catalog with neagtive files unchecked but available previews checked.
I merged two databases and renamed the merged database. I renamed both the Ircat file and the Previews file. The database opens and displays correctly with my history displayed in the Develop module. However when I close Lightroom with the Backup option, the backup directory is not created.I have Lightroom 5 installed on a Windows 7 desktop computer.
I accidentally deleted my backup file from the folder that light room created in my folder. I have it backed up in my Time Machine but I can't find a way to ask light room to look at it again. I can put it back in to its place but light room isn't seeing it or I just can't figure out away to ask light room to see it again.
I need to re-insatll my PC and wanted to know how I can backup/restore my LR4 presets/preferences. The most important for me to keep are the Smart Collections, Keyword list and Export settings (to Flickr). I also use a number of plug-iins, but I imagine I simply need to re-load these (however, if I can keep the settings associated with these plug-ins that would save a lot of time).
The backup of my catalog aborts with an error! LR says that it could not back up the catalog. Folder permissions and sufficient disk space is available.
Until a few days, everything was still working. Even if I create a new catalog I get in the catalog backup, the error message
Currently moving from pc to mac for my LR. Why do I have to move my Backup folder and how do I do this because I do not want to move all of my photos I have on my old computer?
I am trying to restore my LR4 catalog from a backup. Here are the details.
- Lightroom installed on Windows 7 main drive - C:
- Entire photo collection stored in a separate internal hdd - F:
- LR4 catalog backed up on an external drive.
I had to reset my C: drive back to factory status, wiping out all of my installed programs. After the factory reset I had to reinstall my secondary HDD and it was recognized by Win7 with one problem. It is now listed as E: rather than F:.
After reinstalling Lightroom I copied my catalog backup into the appropriate folder and launched LR. It recalled the catalog with no problem but couldn't find any of my photos! Is there any way to tell Lightroom where they all are rather than reimporting? The photos are all in the exact same location as previously. The only change is the drive letter from F: to E:.
I tried to go into Windows and change the drive letter from E: back to F: but Windows won't let me name it F: for some reason.
When trying to import photos into Lightroom 4 the "check box" on "Make a Second Copy to:" doesn't allow me to check it. The box is not lit to allow me to check it. In the top middle of the Import Screen I have Copy highlighted too. What must I do to get the Backups working during import?
