Backup Catalog process will not complete.
- I have to use Task Manage to shut LR4 down
- LR4 will then not restart
- Computer shutdown also stops working.
I have to pull the plug to restart.I am a current LR2 user and am upgrading to LR4. I use Win7 64bit.I looked over 4.1 RC2 release notes and saw nothing on the subject.
I am having a problew with my first full backup after importing 27000 photos.My catalog organizer in psa 11 also shows over a 1000 movies from adobe premier elements software which seems to have a common thread between them. The backup stops at 44% the 3 times I have tried. Just a beginner with both software.
View 2 Replies View RelatedI'm new to Adobe. I just started using Photoshop Elements and Premiere Elements.
Adobe Elements 12 Organizer reminds me to backup my catalog about every third time I open it.
So, I did a backup to my Drobo5N.
Every single time, no matter how long I let the backup run, it stops at 96% and OS X 10.9.2 shows the program as 'not responding' so I have to force close it.
My LR4 backups took forever (130,000+ images) on a 3-year old iMac (2.93 Gig i7 Intel w/ 8 Gig RAM and OS 10.8.4), but it DID complete the backup procedure. Unchecking Optimization and Integrity Check sped up the backups considerably. Upgraded to LR5 and not backups WILL NOT COMPLETE, regardless of what is checked off or not. Longest time I've waited so far is 30 hours.
Backups have been tried to internal Mac HD, an external 2 Gig, an external 1 Gig, and a 10 Gig Drobo array. ALL fail to complete.
Win 7, LR4
I have a Western Digital desktop 1 TB backup, using the WD Anywhere Backup software. I have had zero issues using this over the last three years with previous LR versions, Win Vista, and now Win 7. This issue started with the LR 4 beta, and continues with LR 4. No other issues with any other program.
I back up my LR catalog daily when exiting LR. The backup process would go into an endless loop, cycling through optimize, integrity, and backup routines. It would get almost to the end, and start over. After several cycles, LR would stop responding and quit. I would also get a popup from the Anywhere Backup software, telling me there was an error in the backup process. Another popup would tell me it had quit and offer to submit the info to WD, which I did on several occasions. I finally figured out I could complete the backup process if I paused the WD backup process, but I started getting other error messages related to WD. I have now got it down to actually quitting the WD program before opening LR, and once I have closed LR, restarting the WD program and all is well.
I have a LR4.4 catalog that contains thousands of edits and all my publish services. File size is 1.2Gb. I used the LR5 beta and would like to import the edits from that catalog as well as the edits and services from the LR4 catalog.
Here is what I have tried. Open the LR4 catalog in LR5, tell it to upgrade the catalog for use with LR5. This step works without any issues and the edits and services are present. Now I tell LR5 to import from another catalog and select the LR5 beta catalog. LR begins processing but will never complete. Once it gets to checking for changes in duplicates it seems to hang. Checking the Windows Task Manager reveals that LR5 is still processing, but I have let it sit for over a day and it will not complete the process. I have also optimized both catalogs before attempting the import again, but that seemed to have no effect.
The system should have plenty of processing power being that it is an overclocked 6 core Phenom II running at 4.25GHz with 16GB of RAM, but it seems to just never finish.
For a while I've been using my Lightroom on my Mac on a folder inside my Google Drive folder. The reason for this is that I have an online backup as well my 2 external hard drive backups (you can NEVER have too many backups ).
However, Google Drive has proved to be a bigger let down than any Michael Bay movie out there, and I've now signed up to Copy. If you fancy creating a Copy account, you'll get 5Gb free on top of the 15Gb they so generously give you if you click on this link!
Anyway, my plan is to move my Catalog to another folder in my root drive, aptly titled “Copy”. So, I created a new folder within Lightroom, and went to move it, (whilst using the Lightroom interface) — so far I'm pretty sure this is the correct way, but I've attached a screenshot of the message that came up. This should be ok shouldn't it? I've attached screenshots of where I want to move it to, and the prompt that came up.
The LR 4.4 catalog backup fails when exiting the application. I have set my catalog backup location on a NAS hard-drive (connected via Gigabit ethernet), which has sufficient empty space and correct network permissions. An empty backup folder is created, however no catalog file is copied into it. After the backup starts and checks integrity and starts the backup, a second dialog box pops up that says do you want to back up. The first dialog box is open with the progress bar about halfway complete, but can't be made active. If I start another backup, it runs part way and says can't complete as the same as the others report.
This is strange, since in earlier versions of LR 4 (and even in LR3) I had none of these problems.
I am running Mac OSX 10.8.4 with 2GB of RAM.
The backup of my catalog aborts with an error! LR says that it could not back up the catalog. Folder permissions and sufficient disk space is available.
Until a few days, everything was still working. Even if I create a new catalog I get in the catalog backup, the error message
Can the backup catalog screen be cancelled and then remain in the program?
View 1 Replies View RelatedWhen I run the backup command when exiting LIghtroom 4.2 I get an error that Lightroom was unable to back up my catalog. I have tried many options if unchecking the optomize and and test integrity. And different backup loctions on different drives. I have searched for this issuse and I do not seem to be finding an answer that will solve my problem. I am using a iMac.
View 17 Replies View RelatedI performed a backup of my Lightoom 4.2 catalog upon exiting an editing session. No errors were reported. The next time I opened Lightroom it said the catalog was invalid. Upon checking I found both the catalog and it's backup totally empty -- 0 bytes. It must have erased the catalog during the integrity checking/optimization process prior to doing the backup. Is there any way to recover this catalog? If not, I will have lost a lot of work since the previous backup a week earlier. Obviously the catalog was fine just prior to the backup process as I had just been successfully using it.
View 5 Replies View RelatedThe next time I back up a catalog I'd like it to go to a new place (I want to put everything in the cloud so it's going to a dropbox folder). How would I tell it to do that so that it backs up there each time?
View 3 Replies View RelatedWhen opening LR3 a window appeared asking if I wanted to open a catalog titled Photoshop Elements (or something like that). I said no and then got another window asking to select a catalog. After considerable searching I managed to find what must have been an initial attempt to start LR (several years ago), and it contained about 400 pictures rather than the 100,000 plus it should have displayed. Also, can not find any backups although I backup about once per week. I've looked in all the usual places and the catalog I've been using for the last two years is missing, at least to me.
View 1 Replies View RelatedFor some reason I am no longer able to backup my LR catalog. I have folders in two separate external hard drives but when I attempt backup I get a message: "Lightroom was unable to backup the catalog named Lightroom 4 Catalog. Please check folder permissions...." Could it be that the catalog has become too large as I have well over 200,000 images in it? I don't understand what "folder permissions" I need to check.
View 5 Replies View RelatedI have a brand new ASUS notebook Win 8 64 bit.
LR4.3 installed to the C: drive (default installation). I am now copying from my external drive all photos to the larger D: data drive.
Of course, I have the very latest catalog backed up to multiple places. The old laptop (Windows 7) was just a single C: drive instead of the two drives I now have.
2 Q: 1) To what location do I copy that backup LR4 catalog?
2) As I remember from some years ago, I also need to double-click on that LR4 catalog once it's in the proper place. Is that right?
Is there a way to do a manual backup of the catalog file within LR4 other than having it prompt you when exiting the application?
View 2 Replies View RelatedI recently managed to crash my PC by upgrading from Windows Vista to Windows 7. I continually get a BSOD with exceptionally vague insight into what is causing the problem. Anyhow, I've decided that the best thing to do at this point is to simply wipe my hard drive and do a clean install of Windows 7 (which has a much higher probability of working).
I have my entire Lightroom Catalog and all of my photography backed up to an external drive, so my data is safe. My plan is basically to wipe my PC's main hard disk, do a fresh install of Windows 7, install Lightroom 3.6, then copy all of my Lightroom files (catalog and RAW files) from my external backup drive to my PC's main hard disk.
My question is: Should my Lightroom catalog open without a problem after restoring it in this manner? Should expect any major problems during this process?.
My external hard drive recently crashed and now I am trying to restore my Lightroom catalogs. When I try to open the most recent back-up, I keep getting a message stating the catalog is too new for the current version of Lightroom. I have not done anything to my most recent version of LR.
View 6 Replies View RelatedSo I just tried to do a backup on my new external hard drive and it said it was unable to backup the catalog. Specifically, "Please check your folder permissions, and make sure you have available space on your backup drive and main catalog's drive." I'm not sure what's going on because as far as I know permissions should be fine and there is certainly enough space on the external hard drive. Idk if this makes a differnence but I currently have my catalog backed up on the same internal hard drive that lightroom is used on, I'm just now wanting to back it up on the external. Lighroom 4, Mac computer.
View 4 Replies View RelatedI have 279,94 GB in pictures files and my lightroom catalog backup file is about 272. I tried deleting older backups but had to put them back because Lightroom crashed and had to recover. I moved the Backup folder to an external disk, but seems that I cannot do anything about the files that are in the fomer folder in my computer.
I have only 15 GB left in my 1TB Hard disk iMac !!
Is there a way to process photographs without placing them in the catalog?
View 2 Replies View RelatedI have LR3 on a Mac running OS 10.6.8. My catalog, cache and images were stored on an external Lacie 1TB drive (partitioned so it can be used by a pc and mac). My catalog backup files were saved on another external drive MXTR as well as copies of all my images. The Lacie had started self ejecting while running LR3 and I thought it was maybe a problem with the cable, as it would work fine after rebooting. Yesterday it crashed LR3 and never remounted. I used Disk Utility to try and repair the disk and it instructed me to erase the disk and start over. I was not worried, since my catalog was backed up to another drive. . Another 2 hours to copy my images from the MXTR to the Lacie (again the drive never self ejected during this time either). So now I go to find my most recent backup catalog. The most recent one I could find was dated 2/09/2012. I am baffled. What happened all those times I was backing up? I upgraded to LR3 in 2011, and I don't remember ever telling it to backup to another folder or drive.
View 1 Replies View RelatedIs there a way to turn off screenupdating until a process is complete.
Similar to Application.ScreenUpdating = False used in Excel.
I make changes to several blocks and you can watch as it moves through each one. I'm guessing it might be faster if the drawing doesn't redraw after each.
When I start the catalogue full backup process PS9 calculates catalogue size as 0, and stops there, offering 'cancel' or 'return'. There are hundreds of pictures in the catalogue..
How should I proceed?
Also, is it possible to merge catalogues in PS9?
hiya! so my master media library is running off a 1 tb outboard drive to lightroom and i have a 2 tb outboard drive as a master backup, i drag new media over to the drive through finder on a mac- will this be able to connect to lightroom's catalog in case of the primary drives eventual failure? is there a better way?
View 4 Replies View RelatedWhen I try to backup catalog, elements orgainizer says it requires about 400 terabytes, (photos really take up 26 gb) What gives?
View 3 Replies View RelatedWhen I try to backup the catalog, it starts to calculate space; at 24% through the process photoshop appears to freeze and no further progress occurs. How can I get past this problem?
View 9 Replies View RelatedIt stalls during the "Calculating Total Media Size" operation. All else seems OK. I am able to "Save Metadata to Files" and "Prepare Files". I'm running Windows 7 64bit w/ latest updates.
View 4 Replies View Relatedhow do i backup a catalog ?
View 4 Replies View RelatedThe backup sequence freezes up when calculating the stotal media size of the file. It freezes up at 32%. This also happened with Elements 10.
View 20 Replies View Related