Lightroom :: Cannot Restore From Backup
Apr 11, 2012
I have not been able to restore my catalog(s) using the Backups. My computer crashed and will not start up. So I am thinking, whew – good thing my original image files and backups are stored on a separate (and unaffected) hard drive (plus 2 additional backups of all of this). Until I tried to restore my catalog from the backups.
I am contemplating what to do with the crashed computer, I decide to check the Lightroom backups just to ensure that work fine.
.If I try to open the backup catalogs on my laptop (a separate computer from the one that crashed) without moving them from their current location/ folders (in backup folders on the hard drives) I get an error message that says the catalog file is not writable (due to incorrect permissions or because another Lightroom application is using the catalog).
If I move the catalog backup to the laptop (to a folder location that has unrelated functioning catalogs), I get a message that says the folder cannot be found. I have tried to restore 3 separate LR3 catalogs. I have not attempted to restore the LR4 catalogs yet.
View 2 Replies
ADVERTISEMENT
Sep 16, 2012
I need to re-insatll my PC and wanted to know how I can backup/restore my LR4 presets/preferences. The most important for me to keep are the Smart Collections, Keyword list and Export settings (to Flickr). I also use a number of plug-iins, but I imagine I simply need to re-load these (however, if I can keep the settings associated with these plug-ins that would save a lot of time).
View 2 Replies
View Related
Oct 2, 2013
I bought a new laptop and transferred data from my old one to my new one via Time Machine. All my photos were successfully transferred, but all my presets, settings, changes to the photos that I made are gone. How do I recover that?
I also upgraded from LR3 to LR4 at the time that I upgrade my laptop so that updated my existing catalog, if that's relevant.
View 1 Replies
View Related
Jun 18, 2012
I just managed to crash LR (4.1) big time, resulting in a BSOD and immediate Windows shutdown. What triggered this: both LR and my PC are usually very reliable, and in fact my PC has never before blue screened on me. At the time, LR was building a collection.
I re-booted and checked over my catalogue in LR, focusing on the images I'd been working on prior to the crash (all in the same folder on my HD). I see no obvious corruption with the images I was working on; in fact LR even managed to complete the collection. I allowed it to check the catalogue integrity and it found no issues. However I now have a nagging doubt that perhaps I'm overlooking something... Do you think it might be worth my while to restore from a previous backup, just to be sure no corruption has managed to rear its head in my catalogue, or do you think that, based on the lack of any warning signs, I should be OK?
This raises another related question: how do you know that a catalogue is corrupted at all? Does LR give you any warning/error message?
View 8 Replies
View Related
Dec 27, 2013
My external hard drive recently crashed and now I am trying to restore my Lightroom catalogs. When I try to open the most recent back-up, I keep getting a message stating the catalog is too new for the current version of Lightroom. I have not done anything to my most recent version of LR.
View 6 Replies
View Related
Jun 4, 2013
How we can backup and restore variable sys cad?
View 8 Replies
View Related
Nov 5, 2012
I am trying to restore my catalog into a brand new iMac with Mountain Lion and max memory.
I have created the backup several times, reconnecting all pictures and writing the tag info to the pictures.
After the restore. All the pictures are present and the category info on them seems correct ( properties and icons on the thumbnails ).
The catalog shows all the categories and sub-categories but selecting a category just gets the message that np pictures match the category.
If I try reconnect it says it's not required.
I've tried 4 times and I'm assuming it should work.
View 2 Replies
View Related
Apr 8, 2013
I just got Elements 11 (Windows 8) this week end, and I have a few questions about the Catalogue in the Organizer.
I spent a few hours tagging people, organizing categories, and so on. After that, I did a backup of the catalogue, which from my understanding includes every pictures.
However, does a backup of the "Pictures" folder manually every month. My question is, are the people and tags I added in the Organizer embedded in the pictures, or do I really need to backup and restore the catalog to keep everything I have tagged? If I reinstall Elements 11 and add the pictures manually as I would the first time, will all the info still be there?
View 3 Replies
View Related
Sep 8, 2013
I have PSE11 on my old Windows XP computer. I have installed it also on my new Windows7 computer and hoped it would be easy to transfer the photos by backup/restore via an external hard drive.
When I try to restore a backup on to the new computer, no tly file is found. When I then look at that backup folder in Windows explorer the .tly file is absent. I tried again with an older backup, checking first that a tly file had was present, by looking on the old computer with Windows explorer. Looking with explorer on the new computer - no .tly file. Looking again with explorer on the old computer, the .tly file is gone!
I am completely mystified. I dont't want to keep trying as each successive backup is older. If the .tly files are gone, I assume the backup becomes useless.
View 6 Replies
View Related
Feb 14, 2014
I've restored from a backup on external disc..... but it seems that all of my categories, filing, faces named..... all of the hard work I put into organizing the catalogue was NOT restored?.....
I'm not sure if there was something I didn't tick on the restore?.... but I would have thought, the catalogue would restore to the exact place it was backed up???
Mac Book Pro Mavericks PSE 12
View 4 Replies
View Related
Nov 11, 2013
I am using PSE 11 on Windows to perform a full catalog backup to extenal HDD. The backup complete successfully. I then move teh external HDD and Restore the catalog using PSE 11 on Max OS X (Maverick). After selecting the source and desination for the restore, I get an error message that the selected HDD does not contain a valid backup. I have twice backed up the catalog. The folders on the HDD contqain more than 300GB of data from teh backup. I get no error during the backup process.
View 1 Replies
View Related
Mar 7, 2014
I purchased a new computer today and also purchased PSE 12 (I had PSE 10 running on a different machine/laptop). On the laptop/PSE 10, I had about 20,000 digital on an external drive (all were tagged according to color, theme, etc via the PSE organizer). All of the elements were stored on the external drive under a folder called "digital kits". I used the PSE 10 backup utility to backup my catalog to ease the move to my new machine. After I performed the backup, I renamed the "digital kits" folder to "digital kits-glw" because I intended to just move the external hard drive to the new computer and restore the catalog to the same path, “E:digital kits”, as I have other software that is dependent upon that path.
The restore went pretty quickly, and I can see the correct folder structure within PSE 12 Organizer, but all I have is a bunch of blank thumbnails. Upon closer inspection, the restore did NOT recreate the E:digital kits folder on the hard drive as I expected. Worse, the E:digital kits-glw folder is virtually empty (just a handful of thumb.db files). So, it appears the backup process deleted/hijacked all of my files. (Note: I did NOT verify the contents of the digital kits folder before I renamed it.) Tech support is closed until Monday, and I’m just sick over the possibility of losing all that data, so I’m turning to you all.(I have a backup of the data, but without the catalog piece I would have to re-catalog all 20,000 elements!)
View 4 Replies
View Related
Feb 14, 2013
Old computer was XP with PE10 installed. Moving to new Win7 computer, so did catalog backup of PE10 onto a network drive. On new computer, have serveral Drives: C, E, G (XP drive from old computer for moving stuff over to new system). Installed PE11 on new computer to drive E. Then opened PE11 and did a catalog restore from the network drive. Set restore location to Drive E. Restore said successful, conversion worked OK. Organizer in PE11 shows the pictures and references drive G (my old XP drive that is in my new system). How do I get PE11 to change path to Drive E catalog??
View 10 Replies
View Related
May 30, 2013
I have made a backup copy of all my photos to an external hard drive and photoshop does not recognize the file in order to restore the back up.
View 7 Replies
View Related
Dec 19, 2011
hiya! so my master media library is running off a 1 tb outboard drive to lightroom and i have a 2 tb outboard drive as a master backup, i drag new media over to the drive through finder on a mac- will this be able to connect to lightroom's catalog in case of the primary drives eventual failure? is there a better way?
View 4 Replies
View Related
Aug 27, 2012
catalogs, I got error message about getting current drivers for hard drive. My hard drive is Western Digital which is supported by Windows 7.
View 2 Replies
View Related
Oct 8, 2012
I have a new computer and want to move the databse catalog over. I backed up in PSE 9 to an external hard drive. I connected to HD to the new computer and tried a resotre catalog. I chose "New Location" since I was going from XP to Windows 7 and was unsure if there would be a conflict with file locations. I also chose "Restore Original Floder Strucure". Very quickly I recieve an error message "Could not restor file .xml". I have run Restore Catalog several times and each time a DIFFERENT FILE receives the error message. I then disabled Norton Anti Virus Auto-Protect. I then disabled several programs running in the background. Same problem. I then copied the Backup Catalog to the new computer and tried to Restore it from there. Same Problem. I have now run a Repair Catalog on the original file. PSE states there is no error. I want to purchas PSE 11, but wanted to install/restore the database with the same version 9 first.
View 11 Replies
View Related
May 26, 2013
When i back-up the catalogue, i assumed the backup would be mede of al the tags added to photo's. When i check the catalogue-files, i see a whole lot of jpg-files. My actual photo-collection contains jpg-, raw an avi-files.
I have a habit of making a copy of all my photofiles, but now it seems double
Question: Does de backup-function of photoshop elements 11 actually make a backup of tags and photo's?
View 4 Replies
View Related
Aug 29, 2012
I uninstalled Lightroom, because it was too slow on my computer. It put a lot of library files and directories in My pictures folder.
When I use a backup program (SyncbackSE) to backup my pictures, it starts to scan all the Lightroom library files and it takes forever (hours and counting). Even though Windows cannot find the directories (with hidden and system files shown). I want to completely delete the Lightroom directories, because now I can't backup my images anymore. It is a pain in the dark places.
View 1 Replies
View Related
Dec 26, 2011
how can i restore the plugins
View 2 Replies
View Related
May 24, 2013
If LR4 backup does not backup the actual photos,and the work done in LR4, how do you back up the photos? Is online backup of the PC the only way? I do a backup each time I exit LR but if the adjustments are not backed up that is not good.
View 2 Replies
View Related
Jul 12, 2013
My LR4 backups took forever (130,000+ images) on a 3-year old iMac (2.93 Gig i7 Intel w/ 8 Gig RAM and OS 10.8.4), but it DID complete the backup procedure. Unchecking Optimization and Integrity Check sped up the backups considerably. Upgraded to LR5 and not backups WILL NOT COMPLETE, regardless of what is checked off or not. Longest time I've waited so far is 30 hours.
Backups have been tried to internal Mac HD, an external 2 Gig, an external 1 Gig, and a 10 Gig Drobo array. ALL fail to complete.
View 5 Replies
View Related
Dec 31, 2013
Upon exiting (shutting down) Lightroom 5, we're given a choice to backup the catalog. Is there a way to manually backup it up (without exiting Lightroom 5?
View 2 Replies
View Related
Jan 4, 2014
Is my image backup plan fundamentally flawed? My lightroom catalogue refers almost exclusively to RAW files, but for each file, once I've done the required edits, I "export as DNG" to make a backup which has the edits embeded in. I prefer to use RAW files as the main file but I save the backup as DNG just to save a bit of space)
However, if I replace a folder of RAW files myphoto1.CR2, myphoto2.CR2 with a folder of DNG the equivalents myphoto1.dng, myphoto2.dng then not surprisingly Lightroom shows the files are missing. (At this point all I'm doing is simulating a backup recovery). I can "find missing folder" easily enough and the ? disappears from the folder list, but the individual images in the library are still missing. Again this is not really surprising because although the file names are the same as those referenced in the library the extension is DNG rather than RAW.
Now the surprising part (for me anyway).....I can "find missing file" by pointing to the replacement DNG and it warns me that the file name is not the same (because the extension is different) and asks if I want to link them anyway. I say yes and once again the image file is linked to the image reference in the library. So far so good, BUT, despite ticking the box which is meant to link neighbouring files, only the one image is linked.
Clearly if I do face disaster and need to use my backup DNGs then I can't go individually linking each and every image. Is there a quicker way, or is my backup plan fundamentally flawed?
View 1 Replies
View Related
Sep 16, 2012
I am very new to Lightroom I am wondering how I would go about backing up my library when I used Apple Aperture It would have a file called " Aperture Library " and I would just copy that over to my external hard drive every month. How would I do this in Lightroom ?
View 3 Replies
View Related
Sep 26, 2013
I deleted a folder in the library mode and now I need this folder to be back. I tried to import the hole folder again, but Lightroom didn't show me the images like there weren't any images. I think, that I didn't actually deleted the folder and that the pictures are still in the catalog. And I don't have a back up for this catalog.
View 2 Replies
View Related
Nov 18, 2012
When I first began using LR I don't think I understood the navigation correctly, because for one project, back in June, I created a folder and moved favorites (flagged and 5-starred) from other folders into that one. What I didn't realize until 5 minutes ago is that it actually moves those files on your HD as well! The folder in LR has long since been deleted and for a heart-stopping 15 minutes or so I thought all my favorite photos were gone as well.
What I found, however, was the original project folder with all my favorites on my HD. So that's okay - problem is, now when I try to bring the folders back into LR, it treats them all as new, untreated photos. It doesn't recognize them. It doesn't recognize any adjustments I've made, either. Even in Finder when I open the photos, they're all totally untreated.
My question: is there a way I can get LR to recognize those photos again? Or am I going to have to go one by one and re-do all my adjustments, keywords, and folder placement?
View 8 Replies
View Related
Apr 24, 2012
While editing an image in LR4, I accidentally deleted it from develpment module. I have a problem with restoring it. But I see the same image file by opening Explorer or navigating the original folder of image source. I could not re-import the same deleted image in Library module. ?
View 4 Replies
View Related
Jan 23, 2014
How to restore a deleted Lightroom 5 catalog?
View 1 Replies
View Related
Nov 15, 2013
All of a sudden they are all gone. I can see them in the libraty under the Application Support/Adobe/....
I made a new one and that new one is not in the Library. So here are the watermarks being stored?
LR 5.3 then LR 5.2 to see if I could restore the missing watermarks.
View 1 Replies
View Related
Feb 19, 2013
Is it possible to restore catalouge content that was not backed up?
View 5 Replies
View Related
