When I select MANY objects on screen with the selection floater open, the selection floater scrolls through endledss combinations of white and blue jumping up and down the list. This can take ten or fifteen minutes!!! How can I get this to act properly (other than the obvious close the selection floater before making any selections).
View 1 RepliesI'd like to change the white background to sky blue, to the left of the woodpecker in this photo I took.
I've been trying selections and then refining the edge with various settings. I've tried a selection with the barely recognizable branch on the bottom left and without the branch in the selection.
Once I have a selection with a refined edge I've been using Image>Adjustments>Saturation to change the color with the Colorize option checked on.
I can't get the white background to light blue without making it obvious. The blue sky and edge of the tree just doesn't look right (I forgot the term).
Would anyone have some advice on how to change the white background to a natural blue sky color and have it merge well with the bark edge? Removing the left bottom branch from the photo would be fine.
I attached the full photo scaled down to 500x375 and a larger section of the left hand side.
Ok so i have this image (Attached) im trying to remove the blue rectangle and the white rectangle leaving the blue swirl on the white back ground, iv tried using content aware but it comes out really bad, maybe im doing it wrong will some one be able to look at this for me, maybe it came out wrong because i have the blue swirl and content aware doesn't work correctly with it .
View 7 Replies View Relatedi have 1000 eps files to work with and i dont have the time to go to each one and change the color from blue to black! all are different shapes so i need a batch command that will keep the white, white and change any other color to black!
View 1 Replies View RelatedIf you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
Is there some kind of tweak I can do so that when I scan in full color, the white paper scans as white, not light blue or yellow?
View 6 Replies View RelatedI'm using PSE8. I was using Filter>Render>Clouds and it was working for me. I must have done something because the clouds that are rendered are black & white not Blue and white. My photo is of course a color image. How I can correct this or what I need to do to get back to the default setting that will render blue & white instead of black and white?
View 2 Replies View RelatedI have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?
I had installed the NewBlue title Ex which link one gets when one registers VS X5. Since I did not prefer the same (compared to heroglyph) i uninstalled it, but the name NewBlue Titler Ex still appears inthe drop down FX menu tab. Is there some way to remove this redundant entry?
View 1 Replies View RelatedPhotoshop CS3
My whites and light grays seem blue. For example, if I create a gradient from white to black, the lighter grays, will seem bluish. (See link)
It's not my monitor or color settings because when I save the images, they export in the correct shade of gray. (See link)
Also, the canvas itself doesn't come up blue. It remains white, like it should. The blues occur in shades of gray such as e6e6e6,
How do I make the blue areas white? I rotated a black and white line art and solid (background) blue areas appeared. (CS3 on XP)
View 10 Replies View Relatedhow do i make the blue background to be white???why is the background is in blue. Can this be done by photoshop?
View 4 Replies View RelatedAdobe CS4 prints blue when it comes to white objects in the photo. Any ideas
why? This doses not happen in non-Adobe programs.
I understand the technique for changing colors of an object (New Adjustment level | Hue and Saturation). The question I have is I am trying to change a t-shirt color from Blue to a white color. I have used all the adjustments and cannot get close to white.
View 2 Replies View RelatedI have about 200 pictures that have a white background that I need to change to blue. Normally I would use the wand, crop it with the pen or do a color selection. The only one that is working is the pen but it is taken way to long and was hoping someone would know on a better faster way to change the white background to blue and possibly even making it a action so it wouldn't take that long.
View 2 Replies View RelatedIs there some good way to do this when there are subjects that have many small features, sure as leaves or bird feathers? I have tried different selection methods and feathering, but always wind up with halos or sudden changes at the boundary, that necessite huge amount of detail work to get rid of,
View 27 Replies View RelatedI`m trying to get a number the color "White" on top of a Blue color.I can get all colors to work except the color "White"...
View 8 Replies View RelatedLooking for a fix to blue tinted black and white images with my hp color laser.
I'm not sure if the problem is with the laser printer or with photoshop.
I have a strange blue line with a white border that isn't part of any layer that won't go away, and its thickness scales with zoom. What is it, what is it used for, and how do I get rid of it?
View 1 Replies View RelatedHave great pic of Christ Of The Andes. Huge statue in foreground (gray color), and all white sky in background because of overcast day. I want to change the sky color from white to blue. Formerly, in Elements 4, I could do it easily with the Magic Wand tool. I recently upgraded to Elements 11 and, to my shock, find there is no Magic Wand tool. I am running Windows 7. I tried the Brush tool and, while it selects the correct area, I can't get it to insert the blue color. It is not a choice of color offered. Only gray. I also tried via a new layer, but could not get that to work either.
View 5 Replies View RelatedI have this photo taken in tungsten light, but there remain reflections from the outside light (the sun) which of course appear blue-magentish.
I thought maybe mixing with yellow-green could eliminate them. Actually I only need to decrease their saturation and thus become like other whitish reflections..
How can I delete a blue sky and white clouds in the background of a picture? I am using Adobe Photoshop CS6.
View 13 Replies View RelatedI am hoping to create a canvas for my wife of our baby girl for mothers day. I have a photo that I wish to make black and white whilst maintaining the blue eyes of our baby.
I read that this can be done using paint.net.
I have created a shape which has a solid blue color.I then used the text tool and placed the number 6 in white color on top of the blue.My issue is the number is only visible when i place the cursor on it..it is like it is hiding behind the blue color.How to have the white number 6 visible on top of the blue color?
View 2 Replies View RelatedAlt+numeric keyboard shortcuts do not work in other applications shortly after Photoshop CS4 (64-bit) 11.0.1 is started. For example, Alt+3 and Alt+4 (not on the numeric keypad) do not work in applications that respond to these shortcuts. Once Photoshop is closed, they immediately resume working again as normal.
View 1 Replies View Relatedhow do I Change the light blue color of text selection in corel x6
View 11 Replies View RelatedIs it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
I'm trying to capture VHS to VideoStudio, but am getting unuseable video and no audio. Video appears but visual is very distorted, scrolls across the screen with a large vertical bar moving along with the image. Works the same whether copying home movies or store bought videos. Using S-video cable, running Windows 7 Pro.
View 5 Replies View RelatedI've just started organizing my photos by adding albums and keyword tags. I add the album to all the pictures and get a green album icon on the thumnail. Then for most of the images when I add a tag the album icon is gone and is replaced by a beige tag icon. But for some of the images, when I add the tag I get separate green album and blue tag icons. Why do i get different icon combinations depending on the image?
View 5 Replies View Relatedbar-1.gif
How to tweak this page bar scrolls to right side edge, so that space can be provided for the pages. I have moved to the extreme right, but after restarting it is occupying all the space. Put that one to extreme right or even by removing also no problem for me, since i use hand tool very effectively than this.
Even the vertical bar as well (to remove or hide at least)
Win 7, LR4
I have a Western Digital desktop 1 TB backup, using the WD Anywhere Backup software. I have had zero issues using this over the last three years with previous LR versions, Win Vista, and now Win 7. This issue started with the LR 4 beta, and continues with LR 4. No other issues with any other program.
I back up my LR catalog daily when exiting LR. The backup process would go into an endless loop, cycling through optimize, integrity, and backup routines. It would get almost to the end, and start over. After several cycles, LR would stop responding and quit. I would also get a popup from the Anywhere Backup software, telling me there was an error in the backup process. Another popup would tell me it had quit and offer to submit the info to WD, which I did on several occasions. I finally figured out I could complete the backup process if I paused the WD backup process, but I started getting other error messages related to WD. I have now got it down to actually quitting the WD program before opening LR, and once I have closed LR, restarting the WD program and all is well.