I've been told that LR5 automatically corrects blown out highlights upon import, even with raw. Also, I was told that LR5 adds contrast to the file upon import, even with raw. The person that said this corrects for this by decreasing exposure by 2 steps and decreasing contrast by -33.
View 14 RepliesWhen I import photos into LR3 they automatically go into CS5. Does everybody do this or is it even possible to prevent this?
View 4 Replies View RelatedImport photos automatically?
View 7 Replies View RelatedImport window does not open automatically as it did in LR3?
View 9 Replies View RelatedI did a quick screen capture, and as you can see, the picture on the right (saturated) is the "unedited" version in lightroom, and the picture on the left is the raw file opened (used IrfanView). As you can see, my original file is quite flat, and I like it that way (easeier to edit), but lightroom imports it, and when I click on it to develop, it adds saturation. If I wanted to make it look like the origianl, I have to manually bring down the saturation by ~ -30! Why is Lightroom auto adjusting my images?
I used a Canon 6D to take this picture.
Rather than manually applying lens correction profiles to images by each time having to correct one image and then sync with the rest, I would like LR 5 to automatically apply the appropriate lens correction (either by EXIF info or "default" profile) when importing from the camera (card).
View 3 Replies View RelatedLightroom 5.0 fails to detect memory card and open import dialog. This has always worked fine in Lightroom 4, 3,and 2. Same cards, same camera, same iMac using OS X 10.8.4. Manual importing works OK, card is detected just fine.
View 14 Replies View RelatedI have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections. I then created a user preset with these default corrections. Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import. When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated.
Is this a bug or am I overlooking something on import? I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.
Have to enter a lot of text snippets into illustrator cs4 every day, would love to make my live easier.
I'm trying to figure out how to import text to illustrator automaticly.
I have olny a few parameters: the text, what font to use, the size of the text (the text width and length in mm as if the text would be converted to outlines, needs to be exactly the right size) and the coulor.
Usually its one line of text, sometimes more lines of wich i have the widht and length of the complete block of text
The parameters could be in a cvs-file or something like that, ideally all texts would be imported in one file but it could be seperate files
Texts should be converted to outlines and saved as AI version 3
Is it possible to do this?
Is it possible to import photos automatically into the organizer in elements 11, like picasa does?
View 2 Replies View RelatedI was unable to even open After Effects CC when I upgraded to OS Mavericks. Once I realized adobe released a patch for it (the 12.0.1 "trial" update), the program opened. I thought all was fine, until I attempted to import a new video clip. It would not let me even move the clip, let alone edit it, before giving me a "grouping" error, and then abruptly crashing. Today Adobe released the 12.1 update, which seems to be running ok, except the window for importing footage automatically closes once opened. I can no longer just drag a new clip in to my composition either.
View 4 Replies View RelatedIs there a setting in CorelDRAW that will automatically add the colors in a design when it is imported/copy-pasted/opened to the color pallette? Like you import a logo and the colors are automatically in the pallette?
View 4 Replies View RelatedI want to insert or import an image that automatically recognizes my drawing coordinates.If I need to, I can use AUD (as Map 3D).However, my computer has difficulty processing too much data.
View 7 Replies View RelatedI want myself to decide what and when something shall be added to organizer.
View 4 Replies View RelatedThe usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View RelatedThis issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies View RelatedI work with the option "Automatically write changes into XMP" enabled.
Which data are registered inside the XMP files and which are registered inside le .lrcat file?
I own Lightroom V 3.4. Everytime I insert a flashdrive or SD Card into my computer, Lightroom automatically launches. How can I turn off that feature?
View 2 Replies View RelatedI recently imported about 1500 photos to light-room, and when I click on a photo, it comes up more saturated than the image I took. And it's automatic to all images.
View 10 Replies View RelatedFor pictures taken in low light, I manually edit noise reduction levels.
Is there any plugin that reduces noise automatically (or semi-automatically)?
Long time ago, I used a separate tool that automatically reduces noises, but I'm wondering why LR still doesn't provide this feature.
I have a weird behavior of Lightroom today on one particular image.I have this image of a train (portait) that I want to crop to landscape so I press R, do my crop, validate with Enter.I continue to the next image.When I come back to my train image, Lightroom automatically crop it in portrait.
View 2 Replies View RelatedI use Lightroom 4. My problem is that once i have developed a picture it automatically sends a pic to Photoshop CS3? It engages the program and I have to delete the images, one at a time. I have CS6 as well but don't want to delete the old program because it has a feature that I like, that being (the artistic filters always being accessible)
View 4 Replies View RelatedI am organizing photo's of patients in a lightroom catalog. Each patient has a folder with his ID number. These are organised in the catalog according to the pathology. I can import photo's of the same patient after one year and I would like them to go easily in the same folder, with his ID number. Because the catalog with subfolders is large, it can be hard to find that folder. Is there an easy, 'automatic' way to find it, and to put the new photo's straight in this folder?
View 13 Replies View RelatedI just started using Lightroom. But every time I plug a flash drive into my USB port LR opens up. How can I stop it from doing that?
View 4 Replies View RelatedI use Lightroom 5.2 and Photoshop CC. I also use a number of publish services. If I use Lightroom to edit a photo that has previously been published, it will be marked automatically for republishing. If I use Photoshop to edit a photo that has been previously published (in this case a .PSD) and I select Edit Original to preserve layers in the file, Lightroom does not seem to recognize that the photo has been edited externally, and does not automatically tag the photo for republishing. It happens this wal with all of the installed publish services.
Is this normal behavior, or have I inadvertently changed a Lightroom setting that prevents this from happening the way it should? It's quite annoying, and I have convinced myself that previously it did not operate this way.
In Lightroom 2, 3, if I exported a file, I had to physically toggled/click on the watermark (well, in 2, there wasn't the option).
I just downloaded 4 and started working with it. I exported a file, uploaded it to my print lab and lightroom4 automatically placed a logo phrase. I did not enter this. This isn't a good option to automatically have this box clicked!
I am playing with the book module and I love it. Hwever, I wonder whether there is a possibility to automatically create captions that show the date of the creation of a picture. More generally any subset of the Exif data would be welcome. This is possible for slideshows, but I could not figure out how to do this with book pages.
Is there a way to automatically insert page numbers?