I am following the steps (that I know of) to export time lapse .mov's
But they are leaving off the final few frames. Ive tried a few different templates, but none seem to work.
I have some old images which I have scanned and imported into lightroom. After imported, I went to "Metadata" > "Edit Capture Time" and I set the date and time correctly. Then, when I either export them or upload them to Flickr, I noticed the date/time I set with "Edit Capture Time" is not exported with the image. In Windows, if you right-click the image, select "Properties" then select the "Details" tab, the "Date Taken" field is missing. When I load the image into an EXIF editor, I see the image is missing the ExifDTOrig tag. This is a problem, especially when uploading to Flickr, since Flickr will then assume the upload date/time is when the picture was taken.
View 2 Replies View RelatedI am working on an InDesign project that I am wanting to export as a SWF (because of animation). I have a few pages with scrollable text frames applied with the folio overlays panel. When I export the document as a SWF file, the scrollable text frames are rendered inactive. Is there a way to export as a SWF and keep the scrollable text frames intact? I do not want to export as an interactive PDF because of the use of animation.
View 5 Replies View RelatedI'm trying to compress my overall animation and I want to reduce the number of overall frames. How do I do this without losing all my Key Frames? Do I use the Re-Scale Time button? It seems to still delete my key frames.
View 1 Replies View RelatedHow do you edite all animation frames at the same time? Can't figure out how to do it...
View 1 Replies View RelatedIs it possible to insert time from where the 'Current Time Indicator' is across all layers?
So it would extends all the layers and move all the keyframe accordingly..
In the adobe flash days pressing F5 would achieve the same effect.
So using this image as an example, pressing F5 would extends the layers/move all the keyframes after the indicator by one frame...
For some reason the time ruler is displaying frames and not seconds. I have tried cycling through the various time modes by ctrl clicking it as well as modifyign it in file->project settings, yet seconds will not show up on the time ruler. Please view the image below. I have also tried resetting the work space to standard default with no result.
View 4 Replies View Relatedwhen I want to add time to the time display, to re-position the timeline cursor, i use +15 for example. But when i want to subtract time, -15 wouldn't work. How does subtracting frames in the time display work ?
View 2 Replies View RelatedI'm following some tutorials on digital tutors and I see that an easy way to preview the frames is just by simply moving the time indicator, and the frames will play in real time by just moving the current-time indicator back and forth.
However, it doesn't work for me for some reason, when I move my current time idncator, the only thing see is the frame what it was on, and won't update until I let go of time time indicator.
I am trying out my new cam which can do video in 24p (23.something), and I can edit the clips, all ok. There are just two things I cannot do: Make a still (it's really the 24p material, I used a clip in 60i and stills worked), and changing the time/frame counter to 24 frames. No matter what I do, it will always stay there.
View 6 Replies View RelatedI'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies View RelatedI have been trying to figure out if I can make capture time changes to adjust for time zone errors or the daylight saving time mistakes where the capture time in the Metadata panel is off by 1 hour or so, and then have these adjustments saved permanently to the original files (master photos). This works for JPEG files and it also works for DNG files (after converting from CR2 to DNG). But it doesn't seem to work for CR2 files directly. If I used the "Save Metadata to file" option from the Metadata menu I might just get sidecar XMP files.
Then I found this option "write date or time changes into proprietary raw files" in the Catalog Settings. This seems about right. But what does it do? I tried enabling that, created a new catalog and then imported some new CR2 files. I then changed the captured time and tried the Save Metadata to file option. It still spits out these sidecar files. It doesn't actually write this to the CR2 files.
Or does it? Perhaps I am not seeing it in Windows Explorer? Like IPTC vs. EXIF? I'm not sure Windows reads both. These are like different types or sections of metadata information about a file. So I just wonder what the benefit or consequence is of having this option enabled? Whatever it is, it is not very apparent. And as you can see from the screenshots above the capture time has not changed (not been saved) when you look at the file in Windows Explorer. Any changes are held in the XMP sidecar. Even thou I have enabled this EXIF option in Catalog Settings.
I want to add a watermark to a photo which encompasses a progress time or finish time of a sports event. For example, if an event starts at 7.00 am, photos taken at 8.05 am, in the watermark I want to display 1:05 hr (or 65 mins).
View 1 Replies View RelatedI have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies View RelatedI have a Canon S100 and just started importing photos and video into my LR 4.3 catalog. I convert RAW to DNG, and the Capture Time on the photos in LR is correct. However, the video Capture Time is shifted forward exactly 8 hours. I know how to correct the video Capture Time, but is there anything I can do to stop this from happening in the first place? I looked at what the metadata looks like in Bridge.
PHOTO:
Date Created = Correct Capture Time
Date File Modified = The time I imported the file into LR.
VIDEO:
Date Created = Capture Time + 8 hours
Date File Modified = Correct Capture Time
I recently had my hard drive replaced by Apple and did a clean install of my programs, no Time Machine.
I have LR 4.3 and CS5. I have always chosen the Edit in PS CS5 option from LR for editing individual RAW files. When I save my photo in PS, I save it as a jpg. Once back in LR, I would have to synchronize the folder in order to import that new jpg and it would show up alongside the original RAW file. Well now, after upgrading to 4.3, synching won't see that new photo that was created. It IS in Finder, but LR doesn't see it.
I have expanded stacks and no filters. Is there anything else I have to do?
If I use Filters/Metadata/File Type, no jpg's appear.
The only way I can see the photo is if I use the Text filter and write .jpg.
How can I get the jpg to show alongside the original RAW file again??
I'm also getting the "File must be saved as a copy"in the PS dialogue, when I save as jpg. Before, it would just save it as the file type is different.
Exported photos are 5x larger (3.5MB to 16.5MB)
View 6 Replies View RelatedI just purchased LR5 as an upgrade from 4. I was noticing my images were quite smooth when exporting to Jpeg with LR4. It seems now there is alot more graininess that wasn't the issue before.
View 4 Replies View Relatedusing LR5 Win7/64
when i export the pictures alone, they are fine, but when exported in a slideshow they look dull and faded. The black appears about 70% gray (just guessing) and the colors lack any vibrance. Repeat: i have no trouble with the pictures when i export them individually. The preview looks beautiful: black black and snappy colors.
i am not seeing any options on export except as pdf or video, and i've tried changing the resolution to the highest to no avail.
it's embarrassing, because i gave them as gifts to my neighbor's family. They were shots of their mother's beautiful flower-garden on the day she passed.
I'm using Windows 8 and LR 4.3. My watermark does not appear on exported images eventhough the box is checked in the export presets. Also many typefaces available in MAC are not in Windows. Where I might find the same typeface I use on my Macbook and add to Windows?
View 1 Replies View Relatedi just noticed that changing the PPI from 240 (taken with my Canon) to 100 and exporting the photos to JPEG sized as 2MP have no change at all in size. Shouldn't 100PPI be smaller in size?
View 4 Replies View RelatedI have clipped the start and end locations on some videos. I then export them with the Vidoe setting of "Original". This is suppost to only maintain the original aspect ratio and FPS.
When I view the exported video it is the same as the original, with the clipped start and end points..If I export to a different format then the edits are included.
I downloaded photos from my camera into lightroom. When I try to export them to a lightroom folder I have created on the HD, the process exports the photos, but when I go to the folder, it does not show the photos. When I repeat the process, it states that the photos are there (but I can not see the recent ones I just added)
View 4 Replies View RelatedOne of my wedding clients has just told me that *some* (about 1-2%) of the small JPEGs from her wedding don't contain any photo - they're just white - although the thumbnail displayed in exporer is fine.
To produce the small jpegs, I import the large JPEGs into a LR catalog and export them at a different size. (don't ask why - I have a good reason for doing this).
[URL]
I have LR5.3. I've only just noticed this. Not sure if it's been this way for a while or not. When I export from LR and make JPGs as sRGB they are more saturated. Also, when I view in the Web panel the images are more saturated. Is this normal?
View 22 Replies View RelatedI have been using previous version of LR and never had this problem. Image is not sharp and noise filter doesn't seem to be applied when I do my export. It looks completely different on a Dev Module.
View 16 Replies View RelatedI am producing some slideshows for distribution as PDFs. It works fine apart from not repeating when it gets to the end of the slideshow. I have the repeat option checked in Lightroom.
View 7 Replies View RelatedI have Lightroom CC. I tried to export my RAW images to JPEGS, as I have done in the past, and the jpegs end up pixelated. What am I doing wrong?
View 1 Replies View RelatedI've just upgraded to Lr5 and installed the 5.2RC. The watermark checked out was checked in export form but no watermark was printed on jpg.
View 14 Replies View Related