I'm doing a presentation of various photos and I'd like to include a different text overlay in each one. However, LR only seems to allow me to apply one caption to all the photos. How can I have a different caption on each photo?
View 3 RepliesWhen I go into Full Editor I have The Learning Center on the left and to the right of that I have the Tools Toolbar.
My problem is that these overlay the photo I am trying to work on. I do not think this happened before. I am sure I did something to cause this but I do not have a clue what that would have been.
It seems to me that the workspace for the photo was to the right of whatever was on the right.
I am looking for an inexpensive website that offers USGS maps with aerial photo and CAD linework overlays. I used to be able to purchase these files from Topo Depot but they closed their site down at the end of 2012.
View 8 Replies View Relatedin Lightroom 5's Slideshow module, i use the Overlay panel (you decide if Identity Plate or custom text appear in the slide show). I've seen screenshots and tutorials where you could add shadow to those overlays - there was a Shadows section at the bottom of the Overlays panel.
But that was Lightroom on the Mac. In my Windows version the Overlays panel does not show the Shadows section that i clearly see on screenshots taken on Macintosh versions.
I'm making a DIY Sex And the City guide for a friend. As you can see I've got image and text. quite pleased with the image. but can anyone recommend a way to display the text? colour/size/font/style ?
Greatfull for any tips Still learning photoshop Quite new to it..
Also, how can I get a nice cut-out of the ring? I've tried the Polygonal-lasso-tool,- but not very good... maybe I just don't have enough experience using it...? any other ways?
Can't see the grid lines in the crop lens distortion correction overlays?
View 2 Replies View RelatedCan't see the grid lines in the crop lens distortion correction overlays?
View 1 Replies View RelatedI use a wide gammut monitor. The colors in the LR5 presentation module are different to the other modules. It seems, that the color-management inside lightroom don't work correctly. In all other modules and photoshop the colors are correct.In the earlier versions of LR the colors are correct.
View 5 Replies View RelatedI purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.
View 4 Replies View RelatedI had over 100 views on this topic in a previously closed thread and not one response.
View 2 Replies View RelatedI would like to print some text on a photo. Can I do that in LR?
View 2 Replies View RelatedHow do I add text to a photo in lightroom?
View 6 Replies View RelatedLightroom 5 (trial) on Mac OS X (Mountian Lion 10.7.5)
I was excited about the book module's "Save as Custom Page" as a solution to preview book we have our lab produce but it seems that several settings are not saved. My intention is for the file name to be under each image but the "Photo Text" checkbox does not stay enabled. Nor, do the zoom settings for the images boxes.
Does "save as custom page" only remember paddding settings and ignore everything else?
Other than the cover template, there doesn't seem to be any page template that allows you to put type directly over a photo -- which can be a useful graphic technique. I know I could do it in Photoshop, and import it into Lightroom, but that wouldn't allow for easy chages in text type or color, etc. and would be an interruption of the book module's workflow. It would be nice to be able to add a text box to a page. Can it now be done and I just haven't found the way?
View 4 Replies View RelatedIs it possible to change the parameters of all the texts (photos and pages) in one time with a personnal parameter instead of doing one by one ? I don't find this functionality.
View 2 Replies View RelatedHow do you add text onto photo collage made in print module on LR 4? Been trying to use the Identity plate
View 2 Replies View RelatedI have just edited some photos for a friend who was short on time, and now she would like a list of the steps I took in editing. Is there any way of listing those steps in a text file I could send her?
View 2 Replies View RelatedIs there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
View 2 Replies View RelatedText is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View RelatedI took two images, one abstract render and one jpeg of COD4. I used the abstract render as my background layer and added text to make the next layer. Now what I want to do is take the jpeg and place it over the current two layers. Here is my question:
1. Everytime I try to open the image, the two current layers are gone and the image is the new background layer, how do I bring in the image without having it become the background?
How do you add effects on an overlay? I have a overlay which I want to come in using a Barn Door effect but how should I apply that? If I have understood well you can't do that, in that case how do you determine time of the "fade in motion effect" in the attribute tab?
View 4 Replies View RelatedI am a total newbee to PAINT.NET (Windows 7)
How (and if it is easy) to scan in a base/master map map (for college projects) and then use PAINT.NET to manipulate another outline (secondary) map as a transparency over the base/master map:
1. Creating the background of the outline (secondary) map as transparent, leaving lines or points
2. Stretching the transparent outline (secondary) map over the base/master map so it fits as close as possible
3. Then after creating a number of transparent outline (secondary) maps create a slide-show of the seconday maps over the master map
4. If PAINT.NET cannot do this with ease any pointers what will?
Is there a way to rotate a pattern after it has been assigned through the blending properties box? I want the block pattern to be assigned to a wall that is angled - the pattern overlay texture is a straight on view.
View 3 Replies View RelatedWhen I am doing shop drawings I hate doing the key plans because I am just re-drawing what the architect has already drawn and then adding elevation marks. A friend told me to just do a "tiff or pdf overlay". He said bring in the floor plan as a pdf or tiff and add what I want in acad. Of course he only knew how to tell me about it, not actually do it. Is this possible in ACAD 2006?
View 2 Replies View RelatedI was in the process of making a banner for my own webcast, but I'm getting frustrated for clearing the background so that a floating banner near the bottom of the screen during the webcast/recorded show.
I've been saving/deleting/experimenting with tolerances so that the background is clear so it appears to float on screen (no effects, just a banner). I've done everything I can to get a clear background, but have been failing miserably, and i couldn't seem to find anyting in relation to this.
The screen size I'm going to be working with is 640x480. The banner I'm creating is 640x100 for the banner. I've also been keeping the Save Configurations to 8-bit so it doesn't effect (I could be very wrong about this too, though) video quality (atleast that I know of).
Here's an example of what I would like to do. . .
Instead of keeping the MF logo restrained in the border, I've been wanting to let it overlap over, but doing that I would get either black or white background, depending on the tolerances that I delete off, and as a PNG file.
Iv'e looked every where for this button called "overlays" can't find it anywere?
How do i enable "monitor overlays"? in PP 7.1
I am currently using photoshop CS5,
I have a layer that is a vector mask over a solid color. The fill of the layer is black, so when i set it to screen it's transparent. I then have a gradient overlay effect applied to the layer that fades from a solid color to a transparency. There is no blending mode applied to the gradient overlay, so it shows up as normal. It looks exactly how i want it to look!
The problem is when i try to flatten this layer, or export this layer as a PNG. The black from the fill shows up where it's supposed to be transparent, even though it's not otherwise visible. If i try to delete the fill all together, and use use a transparent block to overlay my gradient, it won't work, as there is nothing for the gradient to overlay on. If i try to make the gradient using the gradient tool and then using the vector shape layer, it is imprecise, and i know of no way to control how the gradient is applied, other than guessing with the mouse.
I have a bunch of these shapes that need to stack and use the exact same gradient alignment, and i need to be able to export them as png's. If i make them in illustrator and port them over to photoshop, there is still an issue with pixels smearing along the edges of my shapes.
Here's an example, the appropriate fading is on the top, but when i flatten or export i get the bottom:
I'm using Videostudio 12 pro, and am using all 6 overlay tracks for chroma keyed effects. What I'm trying to do is order the tracks so I can control which tracks lays on top of the other. This can be done in Paint Shop Pro or any other publishing software, like Publisher, but I can't find anything that allows me to do this in Video Studio.
I've found that most of the overlay tracks lay on top of the previous track and it's causing difficulty in ordering the people in my clip. Is there a way to control this? Example, I'd like overlay track 5 to go on top of overlay 4 but it won't work.
X5 Pro Ultimate
Default colour duration 6
Default transition effect 4
Jpeg images in overlay tracks (3 or 4)
As part of a slideshow I have applied transitions inbetween the colour clips but they are only working in the video track colours and not the images in the overlay tracks that are on top of the colours tracks.Is there any way of getting the overlays to transition too?
Let's say I have a picture with an ugly translucent overlay, like this:
If I have a copy of the overlay that isn't transparent (or is transparent, but doesn't have anything behind it), is there a way I could use that to remove it from the original image? One application of this would be removing UIs from video game screenshots.
I am currently attempting to create a wood grain background.
I saw that using an overlay gradient really makes it look a lot more realistic but this is to be printed so I am not sure if this is basically treated as a transparent gradient and may not print. Another step in the tutorial I was looking at was also to add another overlay with a colour burn tool so it creates a lighting effect. Again, does this add transparency (my gut is telling me yes).
Here is the tutorial so the effects are better explained (step 8 and 9) - the other steps I have not used as I drew the grain by hand: [URL] ......
I had an earlier issue where I had created gradients with a part of them transparent and they did not print and so I have been avoiding transparency at all costs. The funny thing was when I had a group of objects at 80% transparency they seemed to print fine.
What is print safe and what is not when it comes to such effects.