After finishing with developing an image including cropping, i export it to a Desktop file for emailing. however, the image that gets exported is not the cropped image but the original size.
View 2 RepliesI recently purchased a new Mac Desktop and I would like to transfer my lightroom from my pc to a mac desktop. I am not very savvy on when it comes to this...the apple store will transfer all my files except for software...
View 1 Replies View RelatedI have a new desktop and want to transfer the files from lightroom on my laptop to my new version of lightroom on my desktop. Every method that I've tried thus far has resulted in the original files being transferred without any of the associated processing.
Best way to simply pass these folders from lightroom on one computer to another.
How do I find the size of an already cropped image? I have used custom size and want to figure out what size/ratio is used.
View 1 Replies View RelatedI have Lightroom 4 and the plug-in LR2/Mogrify; which I purchased. I am trying to send my images at 300 dpi to a photo lab to produce 4x6 prints with a border at the bottom that is 10% of the short side, and the other 3 borders are 2% of the short side. I then add text for a size 25 pixel font. I am happy with this look when I export to the file folder on the desktop. When I upload to the photo lab, their software wants to resize my prints; where I loose my border or part of the image or the larger border with the words cut-off. I know I have to do something with the canvas, but I don’t understand what to do to get a fixed image size for a 4x6 print with borders and text. I need to know what the numbers are to imput in the Mogrify "background canvas" and how many KB to "compress to file size".
I have the "image sizing" at 6" longest edge, 300 dpi for resolution
I have the canvas at 1280 x 1920
The compression size at 300kb
With this I am losing the top border and the other borders now look wierd.
I have little room left on my iMac 'C 'drive and want to move them to my 'D' drive. How do I do this so that Lightroom 4 'sees' where the files are?
View 1 Replies View Relatedwhy is my raw image cropped when I reopen it?
View 6 Replies View RelatedHow do you crop and save a cropped image in PS Touch?
View 1 Replies View RelatedThis problem just developed. When I use the crop tool either by double clicking or using the tool bar the image immediately shrinks to one pixel. P.S.CS3 running on OSX10.5.8
View 2 Replies View RelatedI open a jpg file in gimp and use the crop tool. I see the cropped part highlighted and the part to be discarded as a surrounding shaded area. I am happy with the cropped part and open a file-save-as dialog through the file menu. I type in the file name and think I am done. But when I open the saved file, it looks the same as the uncropped file that I started with in the first place. What am I failing to do to make the gimp save my change? I guess the answer is that I didn't really make a change but only thought I did. So how do I actually change to the cropped image?
View 10 Replies View RelatedOpened a jpg file ... cropped then saved as bmp to use as texture in another program.
In explorer folders view it shows but has a locked symbol in front of it.
Try to find it from another program and it does not show in folders.
If I'm using the marquee tool to crop an image, how can I save the new cropped image as a jpeg file type rather than as a PSD, PDD file type?
View 2 Replies View RelatedI have two layers: a background in yellow and a cropped image in the other layer. Now I want to dissolve the cropped image in the background, how can i do that automatically? I know I have the smudge tool, but the results are not so good for me...
[URL]
2.8.2
I have two layers: a background in yellow and a cropped image in the other layer. Now I want to dissolve the cropped image in the background, how can i do that automatically? I know I have the smudge tool, but the results are not so good for me...
[URL] .......
2.8.2
I have been using paint.net for a couple of years to resize photos for work purposes with no problems. All of a sudden two days ago the photos I resized or cropped started saving as oil paintings. I didn't click on the oil painting effect and I haven't changed anything that I am aware of. I've been going through everything I can think of and even uninstalled and reinstalled the program trying to get rid of this weird default change. I can't figure out how to change it back to normal.
View 4 Replies View RelatedI'm in PSE 10 and when I crop a small portion of an image and accept the crop, it remains a small image instead of snapping to a larger image like it did in PSE 6. I know there must be some way to have the small image automatically made larger rather than having to click on the magnifier and "+" and then on the image until it is a size I can work on. I've checked the FAQs and Photoshop Elements 10 but can't find the answer.
View 2 Replies View RelatedI cropped my picture from the white background and added a black Background and now i got a bright border around my watch
I found a guide via google which told me how to do that but this guide is for PS not PSE and in PSE we not have layer matting (or at least i din't found it) so my question is, is there a way to delete this "borders" from my image with PSE easy way? Or i have to delete them manually ?
Here is the Link to my Picture: [URL] ...:
I am Using PSE9 if that matters...
I have my user presets for exporting photos set to W3600 x H2395 when I want to print 12x8, but both 12x8 photos and photobooks come back with the image cropped. Is there a dimension setting I should use to avoid this problem? I have a Nikon D700 if that is relevant.
View 1 Replies View RelatedI am running LR 5.3 and CS6 with the latest updates all installed on a Mac running Maverick (10.9.1). why cropped pictures in LR5 do not upload to CS6? There is no message that it didn't work properly.
In addition, when I undo the cropping in LR, the photo will upload to CS6, however, part of the photo will be destroyed.
I took photos with a DSLR some with a point and shoot, and a lot with my phone camera. DSLR photos are all good quality and when I export I want all of them to keep their original size, point and shoot photos should be reduced in size by about 20~40% depending on the crop I made and zoom when I shot. Phone pics need to be reduced by around 50% or more. One pixel size on export doesn't cut it since all photos are cropped and have various sizes but only some need reduced sizes due to phone camera taking bigger pictures than the quality keeps up with.I need some sort of 'export size for full sized jpeg' or something. (Without exporting each picture individually that is)
View 6 Replies View RelatedLR5 bug. I've found that when I sync a batch of photos more than once, unless I untick the sync crops option, 1px is cropped off the width of all synced photos. The master photo stays at its original size.
My images cannot be anything other than the exact original size. This is a tech issue not a personal one.
Clearly there's a workaround for this, but then you have to remember to untick the crop option. If you don't and you've moved ou of the module and started working elsewhere, it seems that there's no quick undo fix; you just have to go back into each photo and set to the last 'good' history step.
I work with lightroom for wedding photo. I use Book Module to prepare lay out of the final book.
When I put images in a book they are sometimes cropped by the specific page lay out.
I don't use the printing service of Lightroom, instead I prefer to send the files to my local printing service and then stick them to an album (wedding stuff).
Is there a way to export cropped images from a book?
Perhaps a bug? raw files from sony rx100 all come in cropped in LR 4.2 beta . When I select all and batch "uncrop" them, I get an " internal error " I use 5 mb raws.
View 5 Replies View RelatedI would like to transfer several layers from one image to another larger image and have the layers maintain their original alignment to one another. When I simply drag the layers from the layer window to the target image, they typically are not aligned when they arrive.
View 2 Replies View RelatedI don't remember it being a problem in LR4, but I have just used the spot tool on an image where there was a crop. The program's choice of source for the spot tool seems to me to be more dramatic than ever before, and in this particular image the source selected was in the area which I had cropped out. To move the source point, I had to open the crop tool to adjust one side of the crop, then move the source, then restore the crop to the image, then reselect the spot tool.
It might well be that in some instances the cropped out area is the best source, but whether it is or not, I think we need to be able to access the cropped detail without resetting the crop itself and preferably without having to then reselect the spot tool.
I have found that if I straighten a photo in Lightroom and then export it, it will not print correctly. The photo will print with the edges of the photo not straight with the borders of the paper. The angle the photo is printed askew is the same angle that I used to straighten the photo.
This is only apparent on prints with borders, but I assume it is happening on borderless prints as well.
how it deals with cropped images. I have the following edited image, cropped to some specific region:
Then, I tell lightroom to edit this image in Photoshop CS4:
However, once it hits photoshop, it has magically gained more image data than I told Lightroom there should be:
Somehow, all the development settings are correct, but the crop has too much data.
Is there a way to make the cropped part of your image totally black? It would visualize the effect.
View 17 Replies View Relatedhow to keep the layer in the same position as in the original image when moving it to a new image..
View 1 Replies View RelatedI am running windows vista with lighroom 4.1 and CS4 11.0.2.
If I edit a photo with lighroom and send it to CS4 for final editing I am not getting any lighroom adjustments transfered with the image. I have been using lightroom 2.5 with no problems and now I have upgraded to lightroom 4 I am having problems..
I have recently transferred all my photo folders to a new NAS on a different drive to the original NAS. How do I point all my lightroom catalogues to the new NAS? Do I need to do this folder by folder by re-importing the files?
View 1 Replies View Related