LR4 will not save a custom preset. I am experiencing this issue in the Book module for Layout presets, in the identity plate setup. Even in export I am not able to see my saved preset, I mean it does not even exist. After I save a preset in export and I go to export with preset my new preset does not exist.
View 4 Replies
I've never had this issue before, but recently when I create a new document preset and go through the process of saving it, it simply doesn't save (File > New > Preset: Custom > Save Preset > Ok). I've tried reinstalling CS6, removing all other custom things I had (textures, brushes, etc.) but not matter what I do, I cannot for the life of me get custom new document presets to save anymore.
View 1 Replies View RelatedThat would be a HUGE WORKFLOW!
E.g. PS like possibility for own mapping. ESPECIALLY for mapping of any kind of of own custom presets.
Please note that MANY of us use WACOM tablets or similar. With PS any tablet works like a charm. There is quite some space for improvement yet.
I am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies View RelatedI have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
I tryed searching for this on google and the forums but I never got a strait answer, what I need is to save some skin colors that I made into swatches, but I dont have the time or patience to delete all the other swatches in my pallette, anyone know a way of just saving my swatches i made.
View 3 Replies View RelatedI'm having a problem saving pen presets. I set the line style and stroke width, the foreground and background colors then save these as a preset. When I click on it to use it again later, everything comes back except the colors. Is this normal or am I missing something when I save the preset?
View 2 Replies View RelatedHow do I ensure custom presets will be available when I install CS6 upgrade? (Photoshop)
View 7 Replies View RelatedI'm on a Mac running OSX 10.8.3 and lately I've been losing presets when Photoshop CS6 crashes or I have some other unrelated problem. First it was brushes-I lost the palette of brushes I had built over years and had to drag in an old set from a networked computer. Then it was Workspaces; same tedious solution. Now, after I had to reinstall the OS two days ago, I've lost the custom size presets under File/New/Presets/Custom. But it isn't clear where these presets reside in the system: the prefs, the app plugins, or the settings. Where are they stored, and why all these preferences or presets seem to be more volatile in CS6 than they were previously? Or is this all a fig newton of my imagination?
View 2 Replies View RelatedI read on Photoshop Help that custom brush presets are stored in a preferences file within the Documents and Settings folder. I had a few custom brush presets that I'd built up over a few years in CS2 on a computer (with 2 harddrives) that died 2 weeks ago. The data on the two harddrives were succesfully transferred to a new computer (in a folder called "Old Drive" which still contains all the CS2 settings). To recover those custom brush presets can I just copy the "Brushes.psp" file from the old Settings folder to the new CS2 Settings folder (which does not currently have a Brushes.psp file because I haven't made any new brushes yet)?
For that matter can I copy and paste all the individual old settings (Actions Palette, Contours, Favorites,Patterns, Color Settings, Custom Shapes,New Doc Sizes, PluginCache, and Styles) into the new to recover what I had before? What am I likely to mess up by doing that? Could I just copy and paste the old folder "Adobe Photoshop CS2 Settings" into the new folder?
I have tried many times to create custom size documents inPSE 10 without success. For example from the File Menu I select New Document and key in sizes required making any other adjustments. I name the file and close the document.When I open a document to select a custom preset that I have created the Custom Box displays but the dropdown "size" box (where I need to select my preset) is Greyed out.
Seems I am not the only one who is having difficulty with something that is normally straightforward and I wonder if the problem is down to an oversight or bug.
I had to reinstall CS6 and am now looking for my old AI Image Trace custom presets. I'd like to restore them if possible from a Time Machine backup so I don't have to recreate a setting, but I can't seem to find where those are located.
View 4 Replies View RelatedHow do I migrate my saved custom HDR presets on my laptop to my main computer? Both have ps6.
View 3 Replies View RelatedWhen trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
View 8 Replies View RelatedI had created a couple of shapes with the pen tool. I've searched the PS folders to find those shapes as files, but I couldn't.
I'd like to know if there's any way to "recover" them. I still have access to the PS folders, but not PS itself. It's a little complicated. The partition I previously installed PS is now on the slave drive, because I couldn't boot from that partition, which is why I had to install XP once more on the (now) master hdd.
Basically what ive done, is taken a font ive found online and made quite a few changes to it by use of the paint brush, eraser and so on... now i want to save these changes and use this new "font" ive created, and use it in pictures and stuff.
what i would like to know, is how do i save the changes ive made? But i only want the words ive used. I dont want the black background i edited on. I would like to open the file, and just have the words i edited on the new background.
I'm trying to save custom tone mapping curves for later reference and use. I can record the "action" of constructing the curve in Image > Adjustments > Curves and applying it to an image. Unfortunately the "actions" panel does an incomplete job of describing this. Instead of reporting where all 16 control points were set, it reports the resulting first 72 of the 256 mappings ...
View 4 Replies View RelatedOn trying to save a custom brush in gimp I got the following message :
GIMP MESSAGE:
Saving '/usr/share/gimp/2.0/brushes/brush.gih' failed:
Could not open '/usr/share/gimp/2.0/brushes/brush.gih' for writing: Permission denied.
Although I have successfully done this in the past ,for some reason it is now preventing me from saving them in the 'brushes' folder. Incidentally although the brushes I previously produced do NOT appear in this folder (despite having show all files ticked) they do appear in the gimp dialogue and I can use them.
Im using uberstudent (Linux)
I've checked gimp's 'preferences' to see if I have inadvertantly blocked access but cant see anything relevant..
We run 6 seats of Map 3D 2012. We are upgrading computers but want to remain with 2012 for the time being.
Our old machines were 32 bit; the new ones 64 bit. I am having to load the 64 bit version of Map 3D fresh to all the stations (individual; not network)
I have set up custom menus and a preferred workspace on my station some time ago. I don't want to have to reconfigure everything from scratch.
What files do I need to save and how do I access them once I have reinstalled the new version?
If I create a file in Photoshop without coming from Lightroom or duplicate a file in Photoshop that I opened from Lightroom, is there a way to save the new file from Photoshop to the desired directory on my local hard drive and simultaneously have it added to my Lightroom catalog? Or do I need to save the file then import the file into the catalog? I'm working with CS6.
View 5 Replies View RelatedWhere do I save custom hatch pattertns in autocad? What file? Support? Do they have to be saved one at a timeor can they be saved in a folder?
View 4 Replies View RelatedCurrently I am working on a project which required to convert the FDO layer to DWG file through custom coding
( C# ) .
Addition Information :
I am using FDO for fetching oracle spatial data which is displaying as a layer in AUD modal space.This layer I need to save as DWG file through Custom coding ( C#).
When I make any changes to my custom toolbars, every custom toolbar that I have made will appear on the drawing after I click apply and OK. Then I have to go through and X out about 100 toolbars. I would like to be able to turn all of the custom toolbars off at one time. Then only turn on the ones that I want to use.
View 7 Replies View RelatedI have Lightroom 4 installed but can't get any presets to work.
View 1 Replies View RelatedSo I just transferred my Lightroom catalog to a new computer. But none of my presets were transferred. Do I have to do that seperately? Also I'm having trouble even getting to my presets on my old computer. I can see them through Lightroom but can't seem to find them again out of Lightroom. Lightroom 4. Mac.
View 2 Replies View Relatedi have lost all presets in Lightroom 5
View 4 Replies View Relatedi upgraded to LR 5.3 this morning, using the Store Presets with this catalog option, as well as the Upgrade wizard. When LR5.3 opened at the end of the process, all of my Import, Export, or Develop presets were gone. all of those folders are empty (for example C:UsersmePicturesLightroomLightroom SettingsDevelop PresetsUser Presets shows "This folder is empty"), and when i open LR 4.4 (the previous install), the presets are gone as well.
View 10 Replies View RelatedI recently got a new computer because my other one is going out on me. I downloaded LR3 onto my new computer but need to somehow get Ithe presets I created off of my old computer and onto my new one. Anything I find just tells you you have to export them one at a time which would really suck if that were true because I have hundreds.
View 1 Replies View Relatedi just bought the new LR 5.0 (now upgrade) - now i want to save all of my presets within my old LR 4.4 (not just the cataloge) and load them into LR 5.0, so everything is how i know and need it.is there a way to do so?
View 3 Replies View RelatedI downloaded the trial version yesterday, but I am not able to use any presets, the default ones or some I downloaded. I put the mouse over them and the image in the navigation bar does not change, nor does the picture change if I click on them. How can I make them work?
View 2 Replies View RelatedI have Photoshop Elements 9 (which I love) and use it to try and give my pics a more 'professional' look, however I find it very time consuming. I was doing some research on Adobe Lightroom and came accross the 'ultimate collection of The best Lightroom Presets'. URL....has anybody used these or other presets? They sound quick and easy to use, just open your photo and apply the effect with minimal editing- is that correct?
I have small children and love taking photos of them and just want to 'professionalise' my photos quickly and easily, is Photoshop Lightroom better that Photoshop for doing?how the Student/Teacher version of Lightroom is different to the full version?
