Running Lightroom 4.3 on Vista, I cant pass processed Canon EOS 6D RAW images to Photoshop CS4. when selecting to edit in CS4, Photoshop runs but no image appears. There is no error message. In Lightroom Photoshop editor preferences it makes no difference whether I select PSD of TIFF. Is thsi because CS4 is passed an incompatible RAW file... if so whyt no error message?
View 2 RepliesI just updated to Lightroom 3.2 this week. It worked fine the past few days. Then last night, it started kind slow, then showed images shown in Library grid/strip view for any images. But it still show meta data. And no images in Develop tab. But if I move the mouse on the image area, the RGB values in histogram (upper right) still changes with differnt values. Just no images. And it still shows the shooting data.
I reinstalled it twice and oit still behave the same.
Then I build a new catalog. I see images only in the pre-import screen. Once a folder is imported, no images in this new catalog.
I also tried to clear cache, removed preferrance, and then create a new catalog. When I tried to import my images, there is a little triangle showing on top of each image, clicked and it said" Lightroom has some difficulty import the image file".
But PS CS5 Bridge and PS CS5 works just fine. I can actually right click on a grid (even though not seeing the real image or preview) and edit in PSP CS5.
BTW, the day before yesterday's problem, I was watchng the new Lightroom tutorial from this site (which I bought) and adjusted preference,... I don't know whether such a change of setting may cause Lightroom having difficulty seeing images.
I would edit some light work on my images and then export it into a folder. It would look fine and have all the features that I edited. Whenever I upload it to other places, it wouldn't take the edits I made and it shows up as the orginal image or maybe a darkened version of it (I'm not sure). The only place that actually takes my edited images as edited, is 500px. For facebook, there were times when I uploaded and it didn't take my edits, but when I exported the image again to a higher resolution of Jpeg, facebook would take the edits.
I wanted to print some photos so I uploaded them to costco or shutterfly, but the images are not the way I edited in Lightroom.
I have used Lightroom since version 1.0 and at the moment I am using v3.3.
Now I have following problem and I can't find a solution for it: In the Navigator I have synchronized my complete folder where I store all of my photos. This folder contains more than 50000 photos already in many subfolders. But now I found some subfolders not showing all their content. I can see in the Navigator e.g. 216 pictures beside the folder name but in the preview I can see only 3 pictures! And I found some more folders which doesn't show their full content.
I tried to sychronize the single folder again but Lightroom says there were no new pictures and also no missing pictures to remove from the folder. If I open the folder by the Windows Explorer then I can see that all the files for the 216 pictures are there! So there must be a problem with the lightroom database!
But now I don't know what to do to get the pictures displayed in the library again.
When I import images I cannot see them in the previews. I have set 1:1, standard, and minimal but it makes no difference. The images show as grey in the preview. When I go to the develop modual I can see the image I select but if I select another image the first goes gray again. For some reason I cannot render previews. Have I turned something off or on? Can I render previews after importing images? The files show up as DNG in my hard drive.
View 3 Replies View RelatedWhen I am viewing my images in the catalog, I don't know why it takes so long for my edited pics to render. It takes about 5 seconds. Is this normal?
I have tried increasing my cache size, auto xmp is off, I have build standard previews, I have upgraded to a faster hard drive, I frequently optimize my catalog.
Ideally, I want to be able to flip through all my catalog images fast without waiting for the developed pics to show.
The only thing I can thing is maybe storing my cache and catalog folders on my external hard drive is slowing it down?
I created a collection called, "favorites." The catalog indicates there are 48 images in that collection; however, the images do not show up. (This seems to be different from the "missing" problem - I understand how that can happen...) don't know where to look and don't know if I have lost those images somehow? I have approximately 25 other collections, all of which seem fine.
View 4 Replies View Relatedthe film strip at the bottom of my screen shows only a black blank strip. I have turned on every option that I can.
View 2 Replies View RelatedI occasionaly edit nudes on my home computer, where my kids have access. Is there a way to keep these images hidden, their location hidden or have them not show in the library thumbnails?
View 5 Replies View RelatedI downloaded the Lightroom 4 trial program. After watching a tutorial on importing and organizing I imported a few photos from the hard drive on my laptop. All the functions of the program are working but the images of the photos don't show up.Do I need to uninstall and reinstall the program? Can I do that and still have the trial time of 30 days? Is there some other on/off thing I need to do to make this work?
View 7 Replies View RelatedI've triple checked my settings but I can't get images to show in Lightroom contact sheets. The selected images show in Library, Develop, Slideshow, Book and Web but won't show in Lightroom 5.0. Upgrading to 5.3 doesn't work.
View 1 Replies View RelatedThe library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it.
View 1 Replies View RelatedLR 5 is unable to show images of my photos when importing from my Cannon EOS 400. LR3 was able to. Now, in each image frame, I get a message "image not available". The images import correctly, and I can edit them, but I am not able to prescreen them, etc. prior to importation. I have not installed the EOS raw management software. The only other photo editing software I use is IrfanView, as a quick viewer only. I'm running Windows 7, on a Dell Quad core, with mobile NVidea card and plenty of memory.
View 1 Replies View RelatedRecently my hard drive took a (hike) and crashed - data may or may not be recoverable (Geeks are working on that), and I needed to reinstall my CS5 and Lightroom software to a new hard drive (I had to buy a new one). All of my RAW photos are stored on an external drive and were not harmed. Here is my dilemma. Most of the presets I used also went crashing with that hard drive, (yes I believe they were backed up but also on that hard drive...stupid I know-trust me I know!!) but most of them were the free ones from the adobe recommended users on this site. I actually found many of my favorites still posted on the Adobe site and re-downloaded and installed the presets I'd been using the past year and a half, and imade sure those presets were housed properly in their folder via Preferences in Lightroom. Great. I can continue on with my work. WRONG! When I went to go import a recent shoot that I had already edited, it imported the RAW files but none of the previous edits I had worked on for these photos were showing up...it was as if I didn't even touch them and they came right from my camera. What in the world is going on? I'm baffled...and freaking out as I have thousands upon thousands of edited shoots in RAW, and I fear that none of the edits and enhancements made to those photos are going to be present and I'll have to start over. that all of my last 2 years of editing photos are still with the RAW files?!!!
I found a deal on a an HP Intell Core i7 processor) 2 TB hard drive tower, so I ended up needing to install the 64 bit versions of CS5 and Lightroom 3.6. I did test out the RAW (.NEF) file in Photoshop CS5 and my edited RAW image came up "correctly" - so I know that the information is still with the RAW image...I just need it to work and show in lightroom, as it is easier to export the files to the sizes I need them to be.
I would like to use the Library Filter to show images that have a keyword of "Wildflowers" and an empty title. I can do one or the other, but I can't figure out how to have two text filters ANDed together.
LR 4.1 on Windows 7 65-bit.
Running: Vista Ultimate x64 and CS4 Photoshop x64.
I go to bridge to get an image. Can be RAW or JPEG. I know the files are good since I used them on CS3.
When I open the image, I get the "box" that the image is in, the image name in the upper left corner and a grayed out box. There is NO image however.
Now if I grab the box and move it, the image shows up, but once I ungrab the box, the image goes away.
So it just isn't displaying the image.
How can I show two images open in Photoshop CS6 - next to each other?
Going through the screen modes by pressing F like in Photoshop CS5 doesn't get me there. That screen mode with the floating windows seems to be missing. I need it for comparisons and for dragging layers between the two images.
Is the floating window screen mode achievable in CS6 or how else can I put two opened images next to each other on Photoshop's workspace?
After installeing CS4, all my images now look darker in PS. They all look at least 20% darker. I still have CS3 installed, and when I look into CS3, they images now also look darker. But when I flip back to Windows, all images look ok.
I thought it might be Adobe gamma - which I had disabled previously because it conflicts with my color spider calibrator. Sinec installing CS4, I looked in the startup folder of windows, but Adobe Gamma is not there... So I wonder what could possibly be affecting the way the images are showing in PS.
I tried a few different proofing methods in PS, but to no avail (only MAC proofing shows the image closer to what it should look like, but it's still not it).
WinXP SP3
Nvidia 8800 GTS
All latest drivers
4 GB ram (xp sees 3.25GB)
i dl the trial i open it up and i open an image a PSD and nothing shows but a black screen
the only time i see the picture is when i hold on the mouse but the soonest i let it go it goes back to black.
where is the button to show pixels when resizing images? Microsoft paint has it on default but Photoshop cs4 doesn't.
View 1 Replies View RelatedWhen I open a picture in photoshop, the window is not big enough to show it all. When I drag it to my retina monitor on my laptop, it scales down. Why can't adobe figure this stuff out? It used to be that your image would open as large as possible on your monitor, and would show the entire image.
If it was larger than your monitor could display, it would scale it to 66.7% or 25% etc so it would fit. I liked that better than this way - now you just see the top corner of your image and have to drag the window larger to see it.
I recently downloaded and installed Photoshop and I am having trouble opening anything. Any image that I try to open wont show up,I can see if fine in the thumbnail on my layers palette but nothing on my actual workspace. Sometimes it will open but it will only show part of the image and as soon as I try to move it or even click on it, it disappears. Also if I open the image in a separate tab and try to drag it to my original work space, it will show up in pieces or sometimes like a tiled image. I have tried uninstalling and reinstalling. Im hoping it is a setting or something simple..
View 1 Replies View RelatedI am creating some .jpg buttons in photoshop. At first, I could create a button and then do an <img src="location"> and the image would show up. But for some reason, now when I create a button and save it as a jpeg, and then do the <img src="location"> the image won't display. And I am positive it is looking in the right place for the image.
What I have to do is save the button as a .jpg and then copy that .jpg image and paste it over an old .jpg button that I have previously made that would show up. I would save it as the new button name then. After doing that then I can see the new button created.
I don't know if it is the way I am creating or saving the .jpg's that is doing this, or if I accidentially changed a setting in Photoshop.
when in photoshop mini bridge doesnt open bridge and mini bridge doesnt show images,just grey boxes with file names
View 5 Replies View RelatedWhy do images opened in CR coming with PS CC always show 2 EV to bright? The same images opened with CR coming with my PS CS6 on another machine open almost perfect every time.
View 1 Replies View RelatedI created an oval logo from scratch. Its a gif. I saved it using the "save for web" option under the File menu. I use this logo for our website. As long as the logo is placed on a page with a light background it looks ok. But when I put it on a page with a darker background, the image is outlined in white. Its getting very frustrating. This is happening with any image that i give an transparent background.
View 1 Replies View RelatedHow can I get Elements 9 to show me thumbnails of my large file images? When I tweak them with CS5 Elements won't show them in the Organizer.
View 4 Replies View RelatedI put my Edge Animation on a website I have made hotspots to show images and text when you click them.Sometimes it shows the text ,but the images don't show up.
View 14 Replies View RelatedI am attempting to export several CorelDRAW 15 projects to JPEG so I can send them to my publisher, but I've run into a couple of problems...
The first being that the images never actually export. I go to File->Export, select the file type, and then click OK on the options page. The options page just closes and nothing shows up in the destination folder.
The really weird part is that if I try to export the same file again, Corel spits me a message saying it all ready exists and should I replace it. I double check the file path on both ends to make sure I didn't just export to the wrong place and that isn't the issue.
I even went swop far as to check the directory in question in Windows Command Prompt to check for some strange ghost file that I've never heard of and it says that the folder is completely empty.
And then it got even WEIRDER. I right clicked the folder in question to check the properties and, to my amazed shock, it showed the folder containing 4 files and a little over 7 mb (the expected number). Upon a quick search in the start menu, the imported picture ACTUALLY showed up looking perfect with a file address leading to the ghost folder.
Now here's the fun part: I figured maybe it was just a display glitch that I could fix by just moving the folder to an other one, it then proceeded to give me this error:
" The action can't be completed because the file is open in another program. Close the folder or file and try again."
It didn't say what program, but I assumed cleverly it was Corel. I closed it and nothing changed. So I then went to the Task Manager to see if a Corel process is still running... Nope... Nothing. Corel -- as far as the computer is concerned -- is no longer running and I still can't get my files that may or may not be there.
Additional Notes:
Running Windows 7 Home Premium 64-bit SP1
Pentium Dual-Core Processor 2.7 GHz
4 GB RAM
CorelDRAW Graphics Suite X5
I can't seem to get images to show up in 2012. Not all images... just ones that I receive from other folks using LandDesktop 2009. They are usually images of terrain.
View 1 Replies View RelatedI am using Version X6. Is there a way to show white/black clipping on images while I am Adjusting or Editing them?
View 2 Replies View Related