I just had a few RAW files from my 5D mk III get corrupted on import. Either half of the image horizontally, or the bottom right quarter is severly corrupted.
I tried converting these same files with the DNG converter, then importing, and they work fine. I checked before wiping the card!
Edit: Update: I also tried re-importing the files directly from the card into LR 4.1RC and they are fine the second time around.
I've been getting about one or two of these per 3000 photos recently, and obviously it's not a huge deal until it's the ONE image you wanted. I've gone back to the memory card and the file is fine when opened from the memory card and fine when I re-copy the image. Sometimes it's just the preview that looks like this, but when I open it in develop mode it's fine. The file also shows up corrupted when navigate to the folder and open it in photoshop.
This is a rather new phenomenon for me, last year in 125,000 images probably 3 total, but in the last month (10,000 photos) I've had 6. Is it the new version (4.4) of lightroom? Is it my hardrive? Is it my card reader? The only thing I think I've ruled out is my memory cards and camera.
I've imported images into LR4 from my External HD and and a few the files are corrupted. I realize that LR is not suppose to do anything to the files on the disk when importing... but I've checked the RAW images from back-ups and they are not corrupted prior to import into LR. AFTER import into LR the actual file (on the external HD) IS corrupted in both LR and then on the External HD.
My workflow has been to copy files from my CF Card to the External HD (Western Digital 3 TB) ino the appropriate file then go to LR4 and import.I replaced the Card Reader..same problem occurs. I've checked numerous RAW files in Bridge none are shown as corrupted (prior to LR4 import)
I recently acquired the 5DMkIII and after I import the RAW images into LR 4.3RC, LR will, apparently randomly, divide an image into rectangles and color it with psychodelic colors. Out of about 700 images from my last shoot, it has only happened to 3 or 4, so far. But it can happen immediately upon import or on a subsequent viewing/developing of the images. It seems to happen at the time I click on the thumbnail to view or edit the image.I have inserted a sample. This is an image of a hawk on a post (the bird is in the center of the image). Theoretically, I can reimport the image from the CF card and hope it doesn't happen again (assuming I haven't reformated the card). Is this an issue with the camera or LR? It began happening on the Mark III images. I've used 7D, 40D, and XT before this with no problem.
View 30 Replies View RelatedAny "fix" for issues with Corel PDF import "the file is corrupted" error? We do custom apparel and recently added an on-line design tool that exports in PDF. Corel cannot read the files so we are forced to import into AI then expert as an AI file to import into Corel. I am at the point where I believe if there was a book written with all the quirks of X5 it would be a telephone book in size.
View 2 Replies View RelatedSince I upgraded to Lightroom 4 last week, I've had two occasions where Windows 7 operating system at boot tells me I have corrupt files on the separate 2TB drive I use to store Lightroom catalog and photos on. One difference between my LR3 vs LR4 settings was that I turned on the option to write XMP data to files per advice from Adobe evangelist that this is a better backup strategy in case LR catalog gets corrupt. Wondering whether the LR 4 background process to write out XMP is causing the problem.
It might be a self inflicted wound, as last night, I was importing iPad screenshot PNG files into Bridge, batch renaming them and then exporting them to hard drive as JPG (when is Lightroom going to support PNG?) and synchronizing that folder in LR4 so that I can view in LR4. Maybe the fact that I have LR4 and Bridge open at the same time and doing some operations corrupted them? LR4 got stuck at 1% progress in creating previews, so left the computer on overnight and when I come back in morning, black screen of death. When reboot, says I have to check that drive and finds lots of corrupt record segments. Never had this problem with LR3 and Bridge open at same time before LR4 and turning on the option to write XMP data to files.
I use a fully registered Lightroom 5.3 with my Canon 5D Mark III, and I have this kind of corruption on some of my CR2 files from times to times. If i reimport the .cr2 file in another catalog or even on another the resulting file is still corrupted.
The wierdest thing is that the original import was successful and I successfully exported it several times correctly. The corruption should have happens afterward:
This is absolutely inacceptable from a professional software.
PS: I had this kind of curruption with an old version of Lightroom with my previous pentax K7d, but I though this was past
Since the last update I am having images corrupted (truncated) by lightroom, when I open some files in CS5 i get the message about the file being truncated and then only half the image come up.
If I export the file again from LR it works so it's not the usual card malfunction or import errors, my hard drive is in fully working order and tested with drive sentinal.
I recently updated from LR3 to LR4. About halfway through my edit, LR crashed. Upon trying to open up the catalog that I was currently working on, it says that the file is corrupted and prompts me to a dialog box that asks to repair catalog, quit, etc.
I attempted to click to repair the catalog, however another error dialog box pops up saying that it cannot temporarily repair the file.
I've tried everything I could possibly think of, restarted the computer. Copied the raw files and catalog and tried to open it that way -- with no luck. I was editing away and then boom.. no longer have access.
I know there are lots of LR4 performance issues floating around, but I havent been having the normal develope modue issues. My issues are more related to general catalog loading and responsivene
Basically my catalogs tend to slow down drastically over a couple days of useage until they are pretty much useless. When I first import in a catalog they seem to be pretty quick, previews load correctly and when i go to develope it loads up in a couple seconds. Give it a couple days or a few hours of useage though and all of a sudden the catalog will refuse to load images that were not already in cache and trying to open an image will cause the LR to come to a hault and just sit there. If you leave it for a few hours it will eventually load them up usually. I have lost a couple catalogs to this issue. Closing the program and reopening usually results in LR not opening at all. Windows wont even let me kill LR through taskmanager sometimes. I usually have to log out and log back in, but sometimes it will still say the catalog is currently in use.
Running window7 64bit, i7 2700k, 16bg ram, intel 320 ssd (os, LR, and LR raw cache 8gb), nvidia 240gtx, images drive is a seagate 7200k 2TB drive. Raw files are from a d800 and d700. Seems to be more issues with the d800 files though.
I honestly have gotten to the point where I have to back up my catalogs as jpegs daily and often times to complete a wedding I need to use 2-3 different catalogs. LR3 had no issues at all on the same system.
Consider a full OS wipe and restore, or trying to convert to DNGs before editing.
When I select embed medium JPEG, the preview image is corrupted (folded over itself parallel to the long edge) when I view the preview in other programs like irfanview.
Two examples: http:[url]......
I am not much of a computer programmer, but an amateur photographer who just had the catalog with 1.5 years worth of my baby picture edits corrupted. I am so upset. I don't understand the SQlite program, I get a "syntax error" when trying to follow directions for fixixng it.
View 2 Replies View RelatedI just downloaded lightroom 5.4 the other day and today was the first time I went to download images with it.
I could review all my images before I plugged my card into the card reader and attempted to download them, when I opened the import window in lightroom the first image on the card had a preview, but it was greyed out and the rest of the images came up with the .CR2 icon and when I tried to import them I got an error message saying that the files cannot be read.
I tried ejecting the card and putting it back in my camera, but now I can't see the images on my camera either or save them manually to my hard drive.
The files are from a Canon 5D mk II and I shot all the images in RAW with no JPG's.
Why oh why when I export any image from one folder to another do I end up with most keywords applied to that image written to my hierarchical keyword list as a new 1st level keyword and not under the parent keyword as they should be? I've tried everything. I'm using Windows 7 64 bit, with the latest LR 3. Export Synonyms, Include on Export, Export containing keywords are all checked with all the keywords and I've unchecked the Write Keywords as Hierarchy in the Export dialogue. With every export I have to clean up my keyword list and I'm at wits end with wasted hours.
View 7 Replies View RelatedMy hard drive is failing and my catalog is running really slow. I moved all my files onto a new Hard Drive ( mix of Jpegs and Raw). But what do I do now? I need to recover all my actions.
View 1 Replies View RelatedGot the <Unexpected error opening catalogue> dialog when starting Lightroom 5.2. Will not allow me to save a new catalogue. Deleted old catalogue thinking that might prompt Lightroom to create a new catalogue or allow me to create and save a new one.Create Folder with New Catalogue allows me to enter a new catalogue name but then Select Catalogue dialog box is empty. Program wont open!
View 4 Replies View RelatedThe usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View RelatedThis issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies View Relatedworking on a file, a sketch saved it and opened it many many times with no problems 3 days ago i looked for it but i cant seem to find it on my computer at all.i used a file recovery program just to get it back on my computer.but its now corrupted (could not complete request beacues its not a valid photoshop dcoument) .
tryed many ways to fix it its not working. im ready to try anything just tell me !i don't care if i cant edit or open the file on photoshop all i want is to be able to view it i just want to see it again! thats it.
While working on my Mac on a PBS file (just over 3GBs) it crashed while saving. Now when I open the file, it's a mesh of colors on the screen and only 1 layer and is now only 1.5GB. The file is stored on a WD Myworldbook and I have looked for a way to restore previous files but doesn't seem to be an option. There was no backup file made.
View 6 Replies View RelatedI have had a problem with CS4 crashing. It does not happen at the same point of operation but it does it often. I thought I had resolved this problem recently when I discovered corrupted RAM I have replaced it. Here is the latest crash report.
Process: Adobe Photoshop CS4 [49249]Path: /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/MacOS/Adobe Photoshop CS4Identifier: com.adobe.PhotoshopVersion: 11.0.2 (11.0.2x20100519 [20100519.r.592 2010/05/19:02:00:00 cutoff; r branch]) (11.0.2)Code Type: X86 (Native)Parent Process: launchd [172]
Date/Time: 2012-10-05 10:01:36.856 -0500OS Version: Mac OS X 10.6.8 (10K549)Report Version: 6
[code]....
I ran into this issue when saving black and white pictures from Raw file. Camera RAw 7.3 opens normally just like always and lets me save picture in color.It lets me save picture in BW, but the JPEG tha comes out is corrupted file that looks like this (see below):
When i try to open that corrupted JPEG in Photoshop 6 I get an error message saying:"The embedded ICC profile cannot be used because ICC profile is invalid. Ignoring the profile. "
what is causing JPEG to be saved incorrectly?
I recently transferred all my work from a work computer to my mac at home. i am unable to access my work computer until October as we are having a 'break'. However, I have a deadline for September 15th and I need all my files.Some older files open perfectly fine but I fear there was a problem in downloading-perhaps due to my haste to leave and enjoy the beautiful weather! I tried downloading a Remo Repair software but unfortunately this was unable to launch.
Basic notes:
Created on Windows computer cs5
Trying to open on Mac cs5
Sd card used to transfer-couldn't eject, this may be the problem
I had spent my artwork for many days with so many effort and time, and it has been corrupted after a computer crash (not PSD crash). I am using Windows 7.
-What happened after: 1 black layer (around 59 MB)
-What happened before: Had multiple saves, 15+ layers (so why it is not back to the latest save?)
I tried: Previews in PSD, Bridge, using recovery programs (none worked), hex editor, searched for temp./restore previous version files (none) how to recover this file.
My computer crashed today while photoshop CS5.1 was saving/writing to a psd file. When I started my computer back up, and tried to open the file again, It only displayed 1 layer shown as a corrupted image (As Shown Below - the Red Image). When I click on the file in the "Open" window (The Gray Image Below), the psd shows up correctly in the Preview window but doesnt show correctly when opened.
I have lost all of my layers, by the way I have worked on this psd for weeks and I need some way to recover it. I have tried "corrupted psd recovery programs", they did not work. I have tried forums - I found no answer. I have tried locating the .tmp file but it is no where to be found.
Does photoshop have a cache or a history? maybe for previously saved versions of psd files? Or does Windows 7, 32 Bit have a file recovery method? I have tried a windows 7 recovery method but it only recovers files from previous restore points that may be weeks old. This is very important that I do my best to fix this psd file or at least recover some layers, I have put in too much time and effort.
Running CS6 Basic on W7-64bit. I'm not a frequent user of CS6, mostly Photoshop Elements does all I need, but I've been reworking the CS5 Classroom in a Book exercises to refresh my CS6 knowledge.
I've reached the exercise (page 139) where multiple images of a model are merged using File> Automate> Merge to HDR Pro... but getting a weird result in CS6 64-bit. I've tried (resetting preferences, ensuring images are displayed in tabs) but neither has worked. My graphics drivers are up to date as are all Windows updates.
If I run the same images through Merge to HDR Pro in the 32-bit version of CS6 its perfect.
I'm getting all of my menus corrupted after using CS6 for a couple of hours. See below.
.
This is happening for all of my windows (Navigator, preferences, etc.) I have to close the program and re-open to fix.
Running Windows7 64-bit. 12 GB RAM with an ATI FirePro V8700 card with 1 GB on it as well. I have all of the latest drivers for the card (installed yesterday). This should be blazingly fast, and it's chugging along like my CS3 used to with 4 GB RAM. Are these issues with speed and the corruption of the menu items related?