My lightroom 3 has been working fine for ages and I suddenly cannot export at all, the screen just freezes and I have to go to task manager to shut it down. All of the other features are working 'develop' 'import' etc. Am working on windows.Â
View 5 RepliesWindow 7 64bit
quad core, 8 GB RAM
Olympus EM-5 and E-5
Yesterday Lightroom handled a bunch of files from these cameras and today it gives me a message "The following files were not imported because they could not be read." same answer for both ORF (Olympus raw) and jpeg's. The files will open in Elements. Reformattng cards both CF and SD) uninstalling LR and downloading a new install.
LR 5.3 suddenly has stopped showing changes and adjustments and so on in real time. In order to see a change, I have to click on a different thumbnail pic and view that, then back to the one I'm actually working on. I can't get anything done like this, and I can't figure out what I might have done to switch off a live real time view!!
View 8 Replies View RelatedIn a book I am working on, the zoom toggle suddenly stops working. It shows up, but moving the slider does not change the image size in the photo cell. I can still move the photo around in the cell, but cannot zoom in or out. I can right click to change to zoom to fill or zoom to fit, but cannot manually zoom in or out from that. Tried changing the default method to Z2Fit and Z2Fill, but neither mode solves the problem. I have been working on this book for a while, and the manual zoom has worked seamlessly up til now, and suddenly it doesn't work. I am hoping I accidentally hit a keyboard toggle to turn it off somehow, and just can't figure out how to get it back.
Â
fwiw the problem cropped up as I started adding photos from another source, which were Nikon-based jpg files whereas all the rest previously added were either digitial scans (jpeg or tiff) or Pentax files (RAW & jpegs). I cannot imagine this has anything to do with the problem, but mentioning it just because its the only thing that was different when the problem cropped up.
Â
Using LR 4.1, Windows 7
I have been using lightroom 3.4 and photoshop CS6 for sometime. However suddenly I cant move images from lightroom to photoshop (Ctrl+E) with the "Edit a copy with lightroom adjustment".
Â
When I click this option, it opens the Photoshop. But doesnt open the image. However the other two options "edit a copy" and "Edit original" works fine.
Â
Also when i add photoshop again as another external editor, it works fine. But as you all are aware this create another copy of the image.
Â
What I did I checked the applications path for photoshop and it was correct. I uninstalled lightroom and reinstalled.
I have LR4 and PS CS5. Edited several photos this morning without a problem --But this evening, after editing in LR, clicked command+E to open in Photoshop- as I always do, but didn't get the dialog that gives me the option to edit with LR changes. The files are opening as raw instead of TIFF all of a sudden! I have done nothing different aside from updating the Kubota dashboard.
I deleted the Kubota plug-in since that was the only thing I did out of the ordinary but still no luck. I am deserate to get images edited in LR transferred to PS WITH THE EDITS! Why would it work one minute and not the next?
Just tried to edit in Color Efex from Lightroom and got the dialogue. So...it's only happening with Photoshop. I tried uninstalling Photoshop and reinstalling with updated Camera Raw 6.7 plugin. No luck....
Suddenly Lightroom 5 has stopped recognizing Nikon NEF raw files when I try to download them from my cameras memory card.Â
View 5 Replies View RelatedEverything was fine, but suddenly after about one month working with it, CS6 stopped launching.
Hardware:
Win 7 64bit  SPANISH
Photoshop CS6Â Â US ENGLISH
Hardware: Intel Core i5-2500 CPU @ 3.3GHz, 8 MB ram
NVIDIA GeForce GTX 550 Ti
Â
Appears: Error: 16 and the following images. How can I uninstall if I can not launch and deactivate first the product ?
I have had PS7.0 installed on my PC for years with no issues - then suddenly today it wouldn't open - Partly loads and then says "Adobe Photoshop has Stopped working" and shows the following error: APPCRASHPhotoshop.exe7.0.0.03caf9b42ntdll.dll I have done a system restore (Vista Home Premium) until well before this issue started and it makes no difference I have uninstalled and re-installed PS7 and it makes no difference I have installed the same PS7 onto a different PC and it works fine (also running Vista HP)
View 5 Replies View Related i use windows 7 ultimat with 2gb memory and around 300 graphic ram i was using cs from a month and it was working fine. but recently it stopped saving file. whether by commands or going menu option.
the save option is available but when click it nothing happens and save for web is working i need to do lot of work and i m not able to save psd file.
Some of my actions in CS5 all of a sudden stopped working.  Some work, but the ones I use most frequently are not working at all. I have re-booted my computer, turned it completely off/on, re-installed the actions and the same ones aren't working. The action will run, but the brush will not work. For instance, an action called Flawless Face will run, but doesn't actually do anything when I go to "brush" the face.Â
View 2 Replies View RelatedIn photoshop/indesign/illustrator a lot of my keyboard shortcuts have suddenly stopped working. Yesterday when i pressed spacebar in any of these cs programmes it would bring up the hand tool - now it doesnt.
View 1 Replies View RelatedAnd I can't use the pattern stamp tool either. Some switch threw itself and I can't paint or type any more. I created a new blank doc and nothing worked there either. There are no selected areas to be inside of or outside of. Every time I click, the history adds another line, but there isn't anything done.
This kind of thing drives me nuts. *If* there is a reason for invoking the brush and having it not work, there should be an error message like the one for trying to clone stamp without selecting a source.
I Have used Photoshop forover five years, mainly for web graphics. I was changing a section of a current web site which contained text and needed redesigning. I noticed that the text on the replacement image was not smoothed as the original was despite using exactly the same font. The 'jaggies' were very pronounced. I have trawled the help pages and all the preferences available and can't find away to return the text to 'smoothed'.
View 3 Replies View RelatedI have used photoshop CS 5 since it was released and every other PShop since Photoshop 6. Suddenly the Clone Stamp stopped working and keeps telling me I need to alt/click to define. I have tried re-setting all the settings, redoing preference, and even uninstalling and reinstalling the programme. Same thing keeps coming up. Â
View 2 Replies View RelatedMy crop tool has suddenly stopped working. It reduces everything to one pixel.
View 1 Replies View RelatedI recently had to have a new hard drive and motherboard installed on my PC, which is running Win 7. I didn't have any problems at all with Elements prior to this.
Â
I haven't opened PSE 12 for a few days.
Â
My normal workflow is:
Â
Open RAW file, edit, then separately save PSD and JPG in Irfanview (maybe an odd choice but it's familiar and easy to use).
Â
Just recently I've noticed a problem in Irfanview when entering and saving IPTC data, in that suddenly I'm told the file isn't found, when I try to open it the image area is black, and all I can do is delete it. This is possibly unrelated to my PSE 12 problem, however each time the only way to get a usable copy of the JPG is to re-open the PSD in Elements and re-save as a JPG.
Â
Today, in Elements, when I go to Save As (my usual choice) I go through the usual process but when I check on my hard drive the JPG hasn't been saved.
i was using autocad 2013 without any trouble, i used break at point two times, after that i modified some layers and i think that nothing else, and the command break at point stopped working, when i press it it automatically uses the command break. what is going on?
View 8 Replies View RelatedMy liquify filter has suddenly stopped working.
View 6 Replies View RelatedI have auto select turned on and set to layer.
View 7 Replies View RelatedI am relatively new to After Effects CC and am using it to create a stop motion film with a large amount of photos.Usually, when importing the individual images into my composition panel, a sequence of editable rectangles appears in the composition panel allowing me to edit the frame length of the still photos.
Â
After around 950 imported images, the little rectangles suddenly stopped showing up. But when looking at a preview of the project, it's as if the photos are in there, in the sequence they should be. I'm just unable to edit them like the previous ones with rectangles showing.
Â
The area of issue is where you see the descending sequence of boxes in the comp panel. The red tracking bar is there to show that there are still photos continuing the sequence.
I've designed my vector font and exported the first letter as .ttf. in a new Font File.
When exporting the second letter, it asks me if I want to replace the file, and then says CorelDraw has stopped working. I've re-installed X4, but to no avail.
My OS is Vista.
Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedAll of my 20,000 images in LR 4.3 were suddenly duplicated. All the adjustments, ratings,just as if I had selected all and clicked "Create virtual Copy". Is there a way to eliminate duplicate images or undo this mystriuos process? In checking, the second image is a copy of the JPEG image which I exposrted to another location. How can I handle these to somehow get rid of them or do they really not do anything except clutter up the content?
View 5 Replies View RelatedToday when I was exploring the options renaming in library mode in order to keep the development settings my images have. Suddenly, on my hard drive I saw an entire photo folder filled with xmp files!  No xmp files were visible before this and I have checked my catalog settings to make sure that writing to xmp files was not checked.
Â
I don't use separate xmp files - Is there a way to merge the xmp files with their associated photo file? Can I delete them without loosing my develop settings and key words?
Â
I have used Lightroom since v2 and currently on v5.3. Have been upgrading regularly and everything was working perfectly until today.
I am suddenly unable to import my images using LR4. Each night I download my cards using a card reader using LR4. I use a card reader and copy and convert to DNG. Suddenly tonight I keep getting a message that my files were not copied because they can't be read. I have tried using multiple cards, have used different readers. None of it makes a difference. I simply can't move my images off my cards anymore.
Â
The only thing different I did yesterday, and I'm not sure if it made a difference, was to create a new destination folder by right clicking on my list on the right of the screen. I did two different sessions yesterday and I wanted the images in different folders. I right clicked on the folder from my first download, select create a new folder, and imported there. Those images downloaded but I can't do anymore.Â
Â
I have no clue where to start in troubleshooting this. I thought it was the card, but none of my cards work. I thought it was the card reader, but my brand new one won't work.I am thinking it is something within LR.Â
I went from Lightroom 4 to 5 yesterday. No problems, it went smoothly. I uploaded new photos, edited some. Then I used the new clone and heal. Fine. Love it. Tried another image. My fingers were on trackpad and I must have inadvertently changed the way my edit options show. No longer have the main top features after crop tool, clone, heal, etc. Histogram displays. Clone, heal, etc, display. Then it goes straight to tone curve and features below that. How do I get the edit features and sliders back on my Lightroom window?
View 2 Replies View RelatedLightroom 4.4 on a Win 7 computer will not import visible jpeg photos from a chip because the files can not be read. The same photos import fine on another Win 7 computer using LR 4.4. Lightroom has been importing fine up til now.
View 2 Replies View RelatedWhen I right click on a photo in LR3 and click on 'edit in Photoshop CS4', it opens the dialogue box that it has always opened: 'This version of Lightroom may require Camera Raw version 6.5 to be fully compatible,' or something to that effect. I have never needed to worry about that, and have always been able to just click on OK and it has worked anyway, however suddenly it doesn't.
Â
So I checked (just in case the issue was my version of Camera Raw) and I am running Camera Raw version 5.70.213
Â
So I tried to update it to 6.5. I downloaded it (and the Adobe installer manager which it seemed to want me to install), but when I try to install 6.5 I get a message: 'This is not required'.So one message tells me it is required, and another won't allow it to install and says it is not required.
Â
I don't seem to be able to install the latest version of Camera Raw (doesn't bother me as I don't use it - I use LR, except if it is causing this problem), and I have the problem of being unable to edit any of my LR catalogue in CS4.
Out of the blue, when I re-import Photoshopped files back into LR3, they fail to appear in Grid View. But they DO APPEAR in the 'Import' screen, grayed out, as normal. So why is LR suddenly not showing them in Grid View.Here's a screenshot of the import window that clearly shows the image that does NOT appear in Grid View. Notice that image# 2012_3_4-Edit.tif resides immediately next to it's original 2012_3_4.tif file. It obviously is part of the catalog, LR knows it's there but it does not appear in the Grid. I really need a solution to this because I've build my workflow around moving files around with LR and this is a major setback for me now.
View 14 Replies View RelatedI don't hve the fastest computer, admittedly. But dowloading raw pics cand take ten minutes per picture. I am downloading to an external drive - is that the problem, or do I simply need to get a more modern/ faster computer?
Â
I typically shoot in raw and export jpg versions..