I have a paragraph style for numbered lists with rule below set to text width. But the rule doesn't extend to the left below the numbers. Is there a way to do this automatically without having to set negative left indents for each one? There are 80+ list items and since I'm not using a monospaced font, the rule would need to be slightly different lengths throughout.
View 1 Repliesthere maybe opportunity to customize the numbered/bulleted lists in Text tool in Xara Designer Pro 7?
I am not sure maybe somewhere read that it is possible
How do I unbold the numbered list? The first phrase is bolded in my list but I do not want the numbers to be bold.
View 20 Replies View RelatedThe list was going great on all three levels until level 8.2.2 (that's what it should show), but I am showing 6.2.1. I'm pretty sure I have all the correct levelled Paragraph Styles.
This video shows the gist of it. One thing I have noticed is when clicking on the 8.2.1 (the last correct numbering in the list) the option 'clear overrides in selection' is available from the Paragraph Styles window.This is not available on the faulty 6.2.1. so I'm hoping this is playing an important role.
I tried adding another Paragraph Style and resetting that number but what's really strange is that it stays on 6.2.1. and I can't see the point of creating another paragraph style on whilst staying on level 3.
How do I create numbered lists in InDesign where the number is a paper or white character inside a colored circle?Is this a glyph? A combination of a numbered list and circles?
View 4 Replies View RelatedThis morning the shop brought back a set of drawings and requested that I provide a cut list for the fab department. Our drawings consist of an assembly drawing and materials list on the first page with several individual parts on each of the following pages. I am looking at including a column in the ML for the operation ( laser, saw, shear) and sorting the list by it. However when I do this the Item Numbers on the list are all confused. If a person were to look at a balloon on a drawing and then attempt to find it in the list it would be difficult and time waster.
The questions.
1. Is there a way to renumber the item list after sorting the material?
2. If I place an assembly view off the edge of the sheet for each of the following sheets and then place a materials list on each sheet, is it possible to create a plugin that would find which parts are on the sheet and hide all the other parts on the list? I have just started going through the "my first plugin" tutorial and this sounds like a place where it should be useful but I don't know which tags I need to look for.
Is there a way to invoke the iLogic Rule Editor and pass it an existing rule name or external rule for editing?
View 4 Replies View RelatedI need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
I want to simply set a custom iproperty as the Description in each part file within my assembly. I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule. I am struggling to find a way to do this.
I think this may be the best method I have found but I think it must be far easier?
[URL].......
I am working for customer with a simple item with his iLogic design. He has created a simple form to modify his iProperties. To modify the current material, a multi-value parameter was created and the following rule as a local rule;
"MultiValue.List("MATLIST") = iProperties.Materials
iProperties.Material = MATLIST"
He is now trying to make this an external rule but gets the following error
Error in rule: Mat2, in document: Mat2.iLogicVb
iProperties.Material: is probably a bad material name.
The more info tab says:
System.ArgumentException: iProperties.Material: is probably a bad material name.
at iLogic.CadPropertiesInRule.SetDocMaterial(Document doc, String matName)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
In photoshop, How would I create a grid with sequential number in any corner of each square?
View 2 Replies View Relatedhow to select only even or odd numbered files in lightroom? I need to reduce the quantity of images in my timelapse sequence. since there are 8250 images and doing this maually would be tediuos and make me want to kill myself.... : )
View 10 Replies View RelatedI am trying to use iLogic to create the file types I need to give to my vendors once I have created a drawing.In the .idw file I have a rule that creates a .pdf file and .dwg file. I also want it to activate a rule I have in the .ipt file that creates a .dxf file.
trigger = iTrigger0oType=Left(ThisDoc.FileName(False),3)GoExcel.Open("S:DRAWINGSFolder Types.xlsx", "Sheet1")For rowPN = 1 To 200 If (GoExcel .CellValue("A" & rowPN) = oType) Then oFile = GoExcel.CellValue("C" & rowPN) Exit For End IfNextoFolder = "S:DRAWINGSNOT RELEASED" & oFileIf Not System.IO.Directory.Exists(oFolder) ThenSystem.IO.Directory.CreateDirectory(oFolder)End IfThisDoc.Document.SaveAs(oFolder & "" &
[code].....
t is possible to create numbered/bulleted text in photoshop, with indentation as it is done in MS Word.
Just something like the text that appears to the left of the image of that house. The image displayed shows the various components of a water distribution system for a single home which collects rain water and deposits it in a storage tank. The only text that I have written in photoshop is the title and the web address.
This is for some course notes but I wanted to replace the original scanned text (which is in dark blue) for some photoshop text in black colour. But I want the text with the same indent format. Can this be done in Photoshop?
I've seen in a number of graphics people have augmented them with an overlay of a series of 1's and 0's (Binary #'s). They slightly plure them but manage to keep the numbers still slightly visible.
is there a recommended font to use when doing this?
I'm using Windows 7x64 and have recently installed Lightroom 4.3. Initially worked well but after installing Photoshop CS6 I can no longer see images. The metadata and histograms are there but no images. What I see is a set of gray frames, one for each image in the imported group. Each frame is numbered sequentially, and the total gray frames is the same as the number of images in the imported file.
Using the "Develop" mode I still see only a gray box, though the histogram is live, and as I move the cursor across the gray box it shows R, G, and B characteristics as if the photograph is visible.
When I try and open images using image sequence, it does not open all the consecutively numbered files. It only opens about half of them 471 or 873. Why is this? I have copied the files, batch renmaed a few times, and still it does not open all 873. I can tell this by the short length and when I go to export it only says "files up to 471" and it is not the entire folder.
View 7 Replies View RelatedCan autocad automatically create a sequentially numbered array. I do concert seating and am looking to create an array of seats and have them be numbered automatically as I create the array.
View 4 Replies View Related I want to be able to pull the numerical value of a text and be able to increment it by a specified amount to then rewrite the text to the new number...
More specifically i have a floor plan with numbered rooms say 1-100... These numbers refer to a separate schedule with the actual room names and i am trying to keep them in order by plotted sheet... Say area "A" on the first sheet is numbers 1-10...
If halfway through the naming process i notice that i forgot a room in section "A" i now need to increment all the numbers 11-100 by one to 12-101 and add the room number to section "A" that now contains 1-11...
Currently i use TCOUNT to individually select each number in order 11,12,13,14 - 99, 100... to increment this way is very tedious and it would be easier if i could just select the numbers 11-100 with a bounding box and be able to extract the text, convert it to a number, increment, rewrite the original text for every selected text no matter of order..It has been so long since i have written lisp that i am not really sure where to begin..
I need a way to take images of a preset size and slice them up into seperate little image squares which are each saved with a sequential number starting with the first square (top left) but in a grid type pattern - so the first square would be saved as '1-1.jpg' and the one to the right of it would be '1-2.jpg' and the one to the right of that would be '1-3.jpg' etc. Then the next row would be like '2-1.jpg', '2-2.jpg', 2-3.jpg' etc. and so on.
Is there anyone who would possibly be able to help write an action to do this automatically?
I know it's a large request but I'm not so good with complex actions and don't know where to begin with this.
Please help if you can. The final 'diced' images are to be used in a website which is a college project of mine, I'm fine with building the website, I'm just not so good with actions and really don't want to have to slice a number images individually (I'm currently estimating there will be a large number of little squares per image - something in the region 300 or so...). If anyone can help I'll work out the exact figures and dimensions so it can be done.
The drop-down lists for "Selection Filter" and "Reference Coordinate System" have disappeared. (See attached image.)
How to get them to show up again?
I am currently working on making a template for the whole company that would allow all the divisions to use dropdown text in the title block to pick the division, and then the drafter and the person it was checked by. How to get a dropdown text into mtext. Currently I have it so that one office, the one I am in, can scroll through the divisions and the people who work here, using a combination of macros and fields.
View 8 Replies View RelatedI am making a numbered list, including sub numbers (ex. 8.10). What I want to do is under the sub-number create sub-lines with lowercase letters, so it would like this:
a) test 123
b) test ABC
The problem I am having is that I can create the lettered list, close the mtext, and it will look fine . . . until I re-open the mtext and then the 8.11 changes to 8.1. and so on.
I'd like to know if it's possible to use two different styles of part list in the same project.
For example, one for assembly drawings and another for single part drawings.
I have an ADMHierarchyList and I need it to support multiple selection. I see numerous places in the documention that indicate there is a way to set multiple selection (e.g. "... in a list that supports multiple selection..."), but don't see a way to actually set this behavior.
View 3 Replies View RelatedI have a large body of text that is numbered and i need to break it into two separate mtext blocks. is there any way to keep the numbering continuous between the two blocks? every time i delete the redundant text in the second mtext block it starts my numbering over.
View 1 Replies View RelatedAny way to make a custom font menu in coreldraw. By that I mean a shorter font menu that doesnt have all the fonts available on the computer. Ny work PC probably has 2000 or so fonts on it. I really only use 10 or so on a regular basis. It would be awesome if I could have my own custom font list that I could load, and still be able to get to the complete list somehow if I need it. Maybe something like a folder in the font menu?
View 8 Replies View RelatedI have two lists to compare and want the difference in an third list.
like
list1 ("A" "B" "C")
list2 ("A" "B" "C" "D" "E")
the difference in list3 ("D" "E")
Is there a way to align multiple Parts Lists?
I have an i Assembly with 7 distinct members. I have a parts list displayed next to each member. I had no problem getting the views to align, but am running into a wall with getting the Parts Lists aligned (other than just eyeballing it).
I'm writing an input check function (check certain inputs to be positive, or within a certain range). I'm a mechanical engineer with basic coding experience, mostly with basic matlab experience (some c++), so I don't fully understand VB structure, classes, objects, etc.
I'm giving my function a mutlivalue list of the names of parameters, converting to an ArrayList, then using 'For Every Item" in array list If>my condition>then display input box. And I have it working, but probably not the "proper" way, though if it works, it works. My real question is if I can use a multivalue list of parameter names and create a sister MV list that contains the parameter values. Currently I have to hard code a MV list with quotes aorund the names, and one without quotes. I've played around with various ways of using multivalue.set/setlist, val(), CDblAny() and other functions, but always end up with either class mismatches, an MV list with a single evaluated parameter, or an exact duplicate of the original paramter name MV list.
Example of my brute force efforts:
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 684 StartFragment: 314 EndFragment: 652 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
'MultiValue.SetList("testList",ggg)
'MultiValue.List("testList") = MultiValue.List(Parameter(ggg))
Full Input Santitation
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 14751 StartFragment: 314 EndFragment: 14719 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
MultiValue.SetList("posParams", "hopAngle", "hopOutID", "hopOutClearance", "ringThk")
[Code] .....
Inventor 2013 SP 1.1
I had thought this was fixed in 2012, but it seems that lists passed in to a lispfunction, get interpreted as if the first items was a dotted pair code.I first noticed this on a tool that takes three integers as an rgb color.
On some values, it shows null for the args in.On some, it reinterprets as if I am passing in a point.
If I pass in '(1 2 3), I get (5009, (1,2,3)) in .net so that is a 3d point.
Note that this alone is a bug, as its a list of three integers, not a point.
If I pass in '(10 20 30), I get (10, (20, 30, 0)) in .net
If I pass in '(228 27 185), I get null in .net
If there is going to be any interpretation going on, it should be because I sent in a dotted pair list. How Autodesk wants us to pass in lists so they come in as just a list of values sent in. URL....