Illustrator :: How To Recover A File That Not Saved
Aug 24, 2011Is there any way to recover a file that I hadn't saved after Illustrator CS5 crashes???
View 5 Replies
ADVERTISEMENT
Photoshop :: Recover File Accidentally Saved Over?
Dec 30, 2012I saved a file as PSD ,then delete all the layers and was doing another stuff on the sheet( the reason I did this is because I wanted the same page size and was lazy to enter the size:| )after I finished, I saved the file to another name. but, I found that the first file that i saved manually , is replaced by an autosave file on my work procedure on the second file. I know this happend because I was working with the sama names, but is there any way that I can restore my first file that I saved to what I manually saved?
View 3 Replies View RelatedIllustrator :: How To Recover Artwork Saved Outside Artboard From CS5
Mar 13, 2013 I worked on some logo designs at home using CS6.The next day at my friends office I opened the file up in CS5.Now it read the Document as a PDF form (not sure why). I had 3 pages of Artwork that I had to open seperately.I saved 2 of the Docs as new CS5 docs and cotinued working on my logo development on the original CS6 doc opened in CS5.
I continued to work off the original file outside the artboard parameters without 'saving as'.I have spent 5 hours working on designs and kept saving the file until home time.
When I then tried to open the same file that had registered the save (time shown) and file size increased I was left with 1 Artboard and no surrounding designs.
I know my work is in there somewhere due to the file size and fonts it keeps asking for that I used outside the artboard.
Illustrator :: File Seems Corrupt - How To Recover
Jan 17, 2014There is a very important AI file I've been working on. After upgrading to Maverick this morning is seems corrupt -- though I don't think its the file itself since I can retreive versions in time machine from before the Mavericks, and they have the same problem.
Well when I open this file (and so far it is only this file) I get the following error: Can't open the illustration. The illustration ended unepxpectedly. <the a bunch of gibberish>
%_0 R
%)0.71075 0.660365 0.633112 0.695491 0.14902 0.14509 0.14902 XA
%_-1 -- -1 -1 -1 Xy
%_2 w 4 M
%_1 Gp GX
%_1 -1 5 -1 -1 Gf
%_0 O
%_0 0 0 0 1 LB
%_AI5_EndLayer--
%-PageTrailer
gsave annotatepage gresotre showpage
%%Trailer
%%EOF
What can I do to get my file back???
Photoshop :: Recover Non-saved Image
Jun 17, 2008I recently was editing a image on adobe photoshop 7.0 and I was doing a great job I was almost done (took me around 4hours to do) The problem I had was there was a thunder storm, so some how the power went on and off in my house so I think I lost everything Is there any way to get the edited image that was creating back? Like is there a auto save program that if your computer shuts down Instantaneously is auto saves for you, like on Microsoft office 2007 programs?
View 22 Replies View RelatedLightroom :: Can Recover Raw Edits Not Saved As A Catalog
Jun 18, 2013I have raw files that have been imported and edited, but not saved as a catalog/collection. LR crashed & I had to un/reinstall LR (4.4). Can I recover those changes and reapply them to the raw files? If so, how?
View 3 Replies View RelatedIllustrator :: Any Possible Way To Recover Previous File Or Undo Revert Command
Dec 12, 2013I have been working on a project and illustrator and accidentally reverted the file. Is there any possible way to recover the previous file or undo the revert command?
View 1 Replies View RelatedIllustrator :: Opening AIT File Saved In CS5 With CS3?
Jan 2, 2013I'm having some problems properly opening an Illustrator Template file in CS3 that I saved when I was using CS5 (I use CS6 now). My co-worker uses CS3 and can't open the template I made using CS5. I haven't found an option anywhere to be able to downsave the template file to an earlier version. allow my co-worker to open the template file without having any compatibility issues?
View 1 Replies View RelatedIllustrator :: CC Photoshop File Could Not Be Saved
Sep 24, 2013I've always in the past brought a logo file that a graphic designer provided into Illustrator and then exported a psd so that I could bring it into Photoshop on layers and get the exact size, etc that I've wanted and since Illustrator CC I've not been able to do this with any .ai files that I've been given. It always gives me this message after I've gone through the process: "Photoshop file could not be saved" no matter what the settings are. This means I have to use the eps file that was provided which is not nearly large enough and when I try and resize it ... what a mess
View 2 Replies View RelatedIllustrator :: AI File Saved To PNG Or JPG Changes Color?
Feb 17, 2014When I save my AI file, it saves in the correct color scheme but when I go to look at it on a different computer, the color is off. The blues are greener etc.
View 7 Replies View RelatedIllustrator :: CS5.1 - Saved File Icons Are White Boxes
Sep 10, 2012For some reason with CS5.1 on my mac, when I save files in Illustrator they are saving as white boxes, not images of the artwork?
View 2 Replies View RelatedIllustrator :: Radial Gradient In Logo Goes Solid When File Saved As PDF
Sep 11, 2013I have filled a dot in the "I" of a logo with a radial black gradient to represent a ball. When I save as a pdf, the once gradient ball turns to solid. I tried saving the file in ai first and then saving that file to pdf, but that produces the same results. When saved as a jpeg for web, th eimage is perfect. Must be something I am missing in the pdf settings...?
View 12 Replies View RelatedIllustrator :: CS6 JPEG File Saved Looks Distorted When Uploaded Onto Internet
Feb 7, 2013Made a simple type and shape design with a solid backdrop. When I tried to export via save for web to jpeg with high settings, it came up online with subtle but visible alterations. Behind my shapes are speckled like dust, it looks super low quality.
I tried using ps to save instead, I even tried removing the backdrop and remaking a whole new document and just moving select items over, then recoloring..which was not the best attempt but same result.
I'm not exactly sure what her color settings should be to avoid this. Im working at 6500 x 6500 right now. Here's a visual of the up close issue. All over its less quality. And Im saving at top jpeg settings in RGB. I really don't want to tell her she has to begin all over again.
Lightroom :: 4.3 - How To Make Metadata Saved To XMP File Stay Saved
Mar 12, 2013When a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies View RelatedIllustrator :: File Saved As Small PDF Changes Type Point Size And Vertical Scaling
Oct 8, 2013I have an Adobe Illustrator CS6 document with body copy set using 6.5 pt. Helvetica Neue LT Std. - Bold Condensed & Light Condensed.
After saving the file as a PDF in Illustrator using the [Smallest File Size] setting, closing the file, and opening the newly saved PDF in Illustrator - the 6.5 pt. text is now 5.53 pt. with a vertical scaling of 117.65%.
This PDF is for client review purposes - on screen or laser print - not for reproduction. We try to keep the file size as small as possible to make downloading and e-mail attachments manageable.
In this case, my client is opening the PDF in Illustrator to double-check the text point sizes for legal & regulatory purposes.
If I save the same Illustrator file as a PDF using other settings like [High Quality Print], the text size is unchanged.
I was able to repeat the issue using Helvetica LT Std in place of Helvetica Neue LT Std.
I have attached some screen shots for reference.
Illustrator Source screen shot
Acrobat PDF screen shot
I found this older thread from 2011 where someone had the same issue - but was never resolved: [URL] ....
AutoCad :: File Not Valid / Unable To Recover Drawing File
Nov 22, 2012We have three old drawings (saved in the year 2009) that we are trying to open with AutoCAD 2013 and we keep getting the message "Drawing File is not valid".
I have done the following:
Files do have a file size. Sometimes, files have 0 KB size, but not these ones.
We tried to open the files using AutoCAD 2013, AutoCAD Architecture 2012 and DWG TrueView (downloaded today!) and in all instances we get the same message.
We tried recovering and the message is "unable to recover the drawing file"
We tried inserting as a block and, in the command line we get "...was created by an incompatible version of AutoCAD *Invalid*" Again, the file is genuinely older than our current AutoCAD.
Photoshop :: How To Recover A File
Nov 2, 2013recovering a file. I have been working in Photoshop for hours, saving often and needed to send a preview to a client.
I saved as a pdf (checking the button to not save layers) and then saved as a psd. The file name kept saying .pdf so I saved the file as a .psd again. This did not work and I was still working in a pdf. So, stupidly, I closed the file and opened the .psd and it cam up as a flattened image.
I opened the .pdf and it also came up as a flattened image. I have the save recovery option checked and it autosaves every 15 minutes. Is there any way to bring back my file with saved layers?
Photoshop :: How To Recover PSD File
Mar 23, 2012I've been working on this file for a long time, then I tried to work on it tonight, and Photoshop gave me a message that said "Could not complete your request because the file is empty.
View 2 Replies View RelatedCorelDRAW X6 :: How To Recover File X6
Dec 21, 2012my file has been lost how can i recover it in coreldraw x6
View 1 Replies View RelatedPhotoshop :: CS5 - How To Recover Crashed File
Mar 20, 2012My .psd (cs5) file crashed. Is there anyway to recover it.
View 9 Replies View RelatedAutoCAD 2010 :: How To Recover Corrupt File
Nov 26, 2012I am an interior design student and my floor plan saved to USB seems to be corrupted now. It keeps saying File is not Valid. I was working on it last night and saved it like normal and today it won't open. This is my only copy of the file and I don't want to start over. How to recover at least part of it? It's on there somehow. It's showing that the file contains 1,024 KB.
View 1 Replies View RelatedAutoCAD 2013 :: How To Recover Sheet Set DST File
Aug 13, 2012My autocad gets a fatal error unhandled exeption error and crashes when I etransmit from the sheet set manager. it hangs for awhile then crashes, and I have to close the application. This is a very xref heavy job with files from all diciplines culminating to create a zip file for the project. It worked with Acad 2012, took a long time, but worked. By the way this is accross all our our new AutoCAD 2013 installations who try to transmit from this project. I've tried others and it works fine. Just this project. Is there any way to recover the shet set dst file?
View 1 Replies View RelatedPhotoshop Elements :: Is There Any Way To Recover Damaged PSD File
Apr 28, 2013I have Photoshop Elements 6.0. I was working on an image with 3 layers and I'd been saving very regularly, then my computer crashed. It didn't crash while I was saving but it must have still been saving when it happened because my file got damaged. Now when I open it, it comes up with a message saying 'This document contains Adobe Photoshop data which appears to be damaged. Continue and ignore the Photoshop data?' when I click ok it then says 'The embedded ICC profile cannot be used because the ICC profile descrition is invalid. Ignoring the profile'. When the image opens its completely flat and black. I've tries a few recovery programmes but that didn't seem to work. I found a temp file but I don't think it'ss a real temp file because it doesn't have an extension.
View 4 Replies View RelatedPhotoshop Elements :: 9 - How To Recover Empty File
Feb 22, 2014I used photoshop element 9.. I was just finishing my flyer for a client. When I went to click save and was waiting for the save to complete, the photoshop just disappear and when I open it back up PSE9 and went to look for my file, I was working on it say This is not a vaild Portable Document File??? I dont want to start over from scratch Is there any way to recover the file?
View 3 Replies View RelatedPremiere Pro :: Recover Corrupted Project File?
Jan 3, 2014I got this message when trying to load a WIP file: "The project could not be loaded, it may be damaged or contain outdated elements."
I've searched the forums as well as on other sources on how to deal with it. So far I've tried:
1. Check files on AutoSave folder. No luck. All 5 files gave the same message
2. Fix XML with XML wrench. Tried the "Check is Well Formed" & "Check is Valid" and both said ok"
3. Restarted PC. Same thing.
4. Move project and working files to other folders - same.
5. Created a blank project and tried to import sequence - no sequence show up.
6. Import from After Effects and Exported - no luck as well. Came up with a message saying there's no valid sequence.
Some info:
Adobe Premiere Pro 6.0
Windows 7 64bit
Using Plural Eyes plugin
Illustrator :: How To Recover Unsaved Files In CS6
Aug 22, 2013I've recently felt the tragedy of my laptop turning off without me having saved a file. Is there a way to recover it?
View 2 Replies View RelatedPhotoshop :: Recover Corrupted PSD File Where Thumbnail Displays
Feb 11, 2013I have a PSD file that became corrupted when the power went out in the house while in the middle of saving the the file.The PSD file itself is corrupted.
When I load it it says "Could not complete your request because an unexpected end-of-file was encountered." I have tried all sorts of PDS recovering programs and none could get the file recovered except for a BRIGHT BLUE/GREEN BACKGROUND.
When I load up photoshop 5.0 and go to select the corrupted psd file, there thumbnail DOES show up perfectly fine. However I cannot remotely see it in details because it's TINY.. Like 1/16" x 3" high.
Is there ANYWAY.. with ANY PROGRAM that will actually extract that thumbnail? All the ones I've tried online or downloaded extracts the thumbnail as just one BRIGHT BLUE/GREEN BACKGROUND.
I'd like to extract the thumbnail and have it LARGER so I can actually VIEW the contents.
Corel DESIGNER Technical Suite 12 :: Recover File
Oct 22, 2012I have a company profile I created ages ago with CorelDraw 12 or earlier. It has about 12 pages or more. Recently I tried opening it and get this error. Is there any solution?
View 14 Replies View RelatedCorelDRAW Graphics Suite X3 :: Recover Corrupt CDR File?
Jun 9, 2007recover a corrupt .cdr file? I have one that is very large and I don't want to have to recreate all of it!
View 14 Replies View RelatedIllustrator :: How To Recover A Project Made In Adobe
Mar 3, 2014I made a project in my Adobe Illustrator. Today I tried to open it, next message appeared: "Can't open the illustration. The illustration contains an incomplete or garbled object description. Offending Operator: '%%End Setup.'"
View 3 Replies View RelatedIllustrator :: How To Recover Live Trace Button
Jul 15, 2013How to recover the Live Trace button as well as the entire option on a CS5 top bar and Objects menu? Mine has vanished, and while i am still able to find Live Trace under the OBJECT section, it won't allow me to use any of the options. I've tried restarting, I've checked if my images were locked, I've opened various files hoping the outcome would be different, but nothing worked. I've even tried going to Keyboard Shortcuts and keying in a new shortcut, but it won't allow me to as no box appears for me once clicked.
View 7 Replies View Related