CorelDRAW X6 :: How To Recover File X6
Dec 21, 2012my file has been lost how can i recover it in coreldraw x6
View 1 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X3 :: Recover Corrupt CDR File?
Jun 9, 2007recover a corrupt .cdr file? I have one that is very large and I don't want to have to recreate all of it!
View 14 Replies View RelatedCorelDRAW Graphics Suite X4 :: How To Recover Created Brochure (Corrupt File)
Aug 20, 2011How to recover a brochure that I created. Now I can view it in the preview but whenever I try and open the file it stops about 30% - 40% through opening and then crashes Corel and shuts the program down. Now I have tried to import the file as well but the same thing happens. I don't want to have to redraw the entire brochure. The file is about 186MB.
View 4 Replies View RelatedAutoCad :: File Not Valid / Unable To Recover Drawing File
Nov 22, 2012We have three old drawings (saved in the year 2009) that we are trying to open with AutoCAD 2013 and we keep getting the message "Drawing File is not valid".
I have done the following:
Files do have a file size. Sometimes, files have 0 KB size, but not these ones.
We tried to open the files using AutoCAD 2013, AutoCAD Architecture 2012 and DWG TrueView (downloaded today!) and in all instances we get the same message.
We tried recovering and the message is "unable to recover the drawing file"
We tried inserting as a block and, in the command line we get "...was created by an incompatible version of AutoCAD *Invalid*" Again, the file is genuinely older than our current AutoCAD.
CorelDRAW X3 :: Recover A Corrupt CDR?
Apr 1, 2009how to recover a corrupt CDR. The Backup file is corrupt as well. Message: "Error Reading"I tried importing it, converting to PDF and using other machines to try and open it.
View 14 Replies View RelatedCorelDRAW X3 :: How To Recover Blank Files
Sep 8, 2007I've been working on a 32 page project for a week now and while working I noticed that the miniature preview was lost and replaced with a "pen" icon. It's usually a sign of something bad and after closing the file I tried to open it again.
Even though windows says the file is 173 MB, the file is blank. Nothing appears in the object manager either. What do I do to reveal the content? I have deadline tomorrow? The backup is corrupt too for some reason. A backup that gets corrupt - whats the use of it?
CorelDRAW Graphics Suite X4 :: Recover CDR Files That Won't Open?
Mar 10, 2010Half a year ago I started on a project with a CD-cover that wasn't finished. Now when I want to open them, It's impossible. If I click on the files X4 opens and immediately crashes. On all CDR files. Same thing with X5. but I can open a CDR file in the folder next to this. Even the backup files seem to be corrupt. The CPT-files do however open fine.
If I start the program first and then open or import a CDR file, the progress bar halts at about 50 % and then nothing much happens.
Any chance of recovering the files, or do I have to rebuild everything?
I know one strange thing happened when I created the first file. I saved the Digipak format as a new page format and then that format stuck as default page size. I tried many times to reset it to A4, but I didn't succeed with that until I reset the workspace.
I checked the CDR files in ZIP format. In the XML file I coud see that the industry was identified as "music". How could that happen?
CorelDRAW Graphics Suite X5 :: How To Recover Autosaved Files
Aug 10, 2011i've recently discovered the autosave function in corel draw x5, leading to a simple question:
how are these files named? how can i open them to restore the file?
Photoshop :: How To Recover A File
Nov 2, 2013recovering a file. I have been working in Photoshop for hours, saving often and needed to send a preview to a client.
I saved as a pdf (checking the button to not save layers) and then saved as a psd. The file name kept saying .pdf so I saved the file as a .psd again. This did not work and I was still working in a pdf. So, stupidly, I closed the file and opened the .psd and it cam up as a flattened image.
I opened the .pdf and it also came up as a flattened image. I have the save recovery option checked and it autosaves every 15 minutes. Is there any way to bring back my file with saved layers?
Photoshop :: How To Recover PSD File
Mar 23, 2012I've been working on this file for a long time, then I tried to work on it tonight, and Photoshop gave me a message that said "Could not complete your request because the file is empty.
View 2 Replies View RelatedPhotoshop :: CS5 - How To Recover Crashed File
Mar 20, 2012My .psd (cs5) file crashed. Is there anyway to recover it.
View 9 Replies View RelatedIllustrator :: File Seems Corrupt - How To Recover
Jan 17, 2014There is a very important AI file I've been working on. After upgrading to Maverick this morning is seems corrupt -- though I don't think its the file itself since I can retreive versions in time machine from before the Mavericks, and they have the same problem.
Well when I open this file (and so far it is only this file) I get the following error: Can't open the illustration. The illustration ended unepxpectedly. <the a bunch of gibberish>
%_0 R
%)0.71075 0.660365 0.633112 0.695491 0.14902 0.14509 0.14902 XA
%_-1 -- -1 -1 -1 Xy
%_2 w 4 M
%_1 Gp GX
%_1 -1 5 -1 -1 Gf
%_0 O
%_0 0 0 0 1 LB
%_AI5_EndLayer--
%-PageTrailer
gsave annotatepage gresotre showpage
%%Trailer
%%EOF
What can I do to get my file back???
Illustrator :: How To Recover A File That Not Saved
Aug 24, 2011Is there any way to recover a file that I hadn't saved after Illustrator CS5 crashes???
View 5 Replies View RelatedPhotoshop :: Recover File Accidentally Saved Over?
Dec 30, 2012I saved a file as PSD ,then delete all the layers and was doing another stuff on the sheet( the reason I did this is because I wanted the same page size and was lazy to enter the size:| )after I finished, I saved the file to another name. but, I found that the first file that i saved manually , is replaced by an autosave file on my work procedure on the second file. I know this happend because I was working with the sama names, but is there any way that I can restore my first file that I saved to what I manually saved?
View 3 Replies View RelatedAutoCAD 2010 :: How To Recover Corrupt File
Nov 26, 2012I am an interior design student and my floor plan saved to USB seems to be corrupted now. It keeps saying File is not Valid. I was working on it last night and saved it like normal and today it won't open. This is my only copy of the file and I don't want to start over. How to recover at least part of it? It's on there somehow. It's showing that the file contains 1,024 KB.
View 1 Replies View RelatedAutoCAD 2013 :: How To Recover Sheet Set DST File
Aug 13, 2012My autocad gets a fatal error unhandled exeption error and crashes when I etransmit from the sheet set manager. it hangs for awhile then crashes, and I have to close the application. This is a very xref heavy job with files from all diciplines culminating to create a zip file for the project. It worked with Acad 2012, took a long time, but worked. By the way this is accross all our our new AutoCAD 2013 installations who try to transmit from this project. I've tried others and it works fine. Just this project. Is there any way to recover the shet set dst file?
View 1 Replies View RelatedPhotoshop Elements :: Is There Any Way To Recover Damaged PSD File
Apr 28, 2013I have Photoshop Elements 6.0. I was working on an image with 3 layers and I'd been saving very regularly, then my computer crashed. It didn't crash while I was saving but it must have still been saving when it happened because my file got damaged. Now when I open it, it comes up with a message saying 'This document contains Adobe Photoshop data which appears to be damaged. Continue and ignore the Photoshop data?' when I click ok it then says 'The embedded ICC profile cannot be used because the ICC profile descrition is invalid. Ignoring the profile'. When the image opens its completely flat and black. I've tries a few recovery programmes but that didn't seem to work. I found a temp file but I don't think it'ss a real temp file because it doesn't have an extension.
View 4 Replies View RelatedPhotoshop Elements :: 9 - How To Recover Empty File
Feb 22, 2014I used photoshop element 9.. I was just finishing my flyer for a client. When I went to click save and was waiting for the save to complete, the photoshop just disappear and when I open it back up PSE9 and went to look for my file, I was working on it say This is not a vaild Portable Document File??? I dont want to start over from scratch Is there any way to recover the file?
View 3 Replies View RelatedPremiere Pro :: Recover Corrupted Project File?
Jan 3, 2014I got this message when trying to load a WIP file: "The project could not be loaded, it may be damaged or contain outdated elements."
I've searched the forums as well as on other sources on how to deal with it. So far I've tried:
1. Check files on AutoSave folder. No luck. All 5 files gave the same message
2. Fix XML with XML wrench. Tried the "Check is Well Formed" & "Check is Valid" and both said ok"
3. Restarted PC. Same thing.
4. Move project and working files to other folders - same.
5. Created a blank project and tried to import sequence - no sequence show up.
6. Import from After Effects and Exported - no luck as well. Came up with a message saying there's no valid sequence.
Some info:
Adobe Premiere Pro 6.0
Windows 7 64bit
Using Plural Eyes plugin
Photoshop :: Recover Corrupted PSD File Where Thumbnail Displays
Feb 11, 2013I have a PSD file that became corrupted when the power went out in the house while in the middle of saving the the file.The PSD file itself is corrupted.
When I load it it says "Could not complete your request because an unexpected end-of-file was encountered." I have tried all sorts of PDS recovering programs and none could get the file recovered except for a BRIGHT BLUE/GREEN BACKGROUND.
When I load up photoshop 5.0 and go to select the corrupted psd file, there thumbnail DOES show up perfectly fine. However I cannot remotely see it in details because it's TINY.. Like 1/16" x 3" high.
Is there ANYWAY.. with ANY PROGRAM that will actually extract that thumbnail? All the ones I've tried online or downloaded extracts the thumbnail as just one BRIGHT BLUE/GREEN BACKGROUND.
I'd like to extract the thumbnail and have it LARGER so I can actually VIEW the contents.
Corel DESIGNER Technical Suite 12 :: Recover File
Oct 22, 2012I have a company profile I created ages ago with CorelDraw 12 or earlier. It has about 12 pages or more. Recently I tried opening it and get this error. Is there any solution?
View 14 Replies View RelatedIllustrator :: Any Possible Way To Recover Previous File Or Undo Revert Command
Dec 12, 2013I have been working on a project and illustrator and accidentally reverted the file. Is there any possible way to recover the previous file or undo the revert command?
View 1 Replies View RelatedLightroom :: Recover File Of Images Removed From 4.3 That Is Not Found In Desktop Recycle Bin?
Oct 13, 2013How do I recover a file of images I removed from LR 4.3 that is not found in my desktop recycle bin?
View 2 Replies View RelatedCorelDRAW Graphics Suite X6 :: Extract Text From File To TXT File In Another Editor And Then Merge
Dec 7, 2012I´m trying to extract text from a Corel file to a TXT file in another editor and then merge it back in.Extracting the text seems to be working just fine but when I´m trying to merge it back in I get the error message "Wrong file format or could not open".
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: If File Is 11MB Would Print File Be 90MB
May 20, 2011Why, if a file is 11MB, would the print file be 90MB?
View 10 Replies View RelatedCorelDRAW Graphics Suite X6 :: Paste Path In File Dialog And File Export Presets
Sep 11, 2012After finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
Photoshop :: How Do You Recover
May 19, 2009Bought CD for photoshop 2 years ago and someone accidently threw out the box. Had to restart my computer but could not initiate photoshop again because I cannot locate the box with the ID on it. There must be a way to activate it without buying a whole new CD
View 5 Replies View RelatedVideoStudio :: X4 - How To Recover DVD Project
Mar 20, 2011I finished the DVD, looks great, now I want to make another DVD the next day. How do I recover the project? In VSX3 made it really easly to recover DVD projects with all the menus, chapters and any other setting. Where does VSX4 save the finish project at?
View 2 Replies View RelatedAutoCAD 2010 :: Using PDF To Recover DWG?
Apr 24, 2013I have many PDF files of a plotted drawing and a few DWGFx files that were previously saved. However, I do not have the original DWG source file for the PDF files. I'm using AutoCAD 2012 and used the "XREF" command then "Attach PDF" from top left corner pulldown to save the PDF in DWG format. However, I do not know if I am able to edit from this state. Do I need to buy a PDF to DWG converter instead? If so, is the Print2CAD the best software to use? I see a few free sites listed throughout the message board.
View 2 Replies View RelatedCorelDRAW X4 :: File Size When Saving CDR File?
Mar 7, 2011I have trouble with file size, example I design a poster say 120mb and open existing poster 200mb so that i can copy certain images and text from it and even though I delete the second poster before the saving the new poster but the file size becomes 320mb?
So I thought there was something worng with my machine i.e a virus.
I repeated the example above and removed all the images and all background and left the text on the poster and save the final poster with text only but the file size is same i.e. 320mb?
Photoshop :: How To Recover Corrupted PSD Files
Jul 22, 2013I recently transferred all my work from a work computer to my mac at home. i am unable to access my work computer until October as we are having a 'break'. However, I have a deadline for September 15th and I need all my files.Some older files open perfectly fine but I fear there was a problem in downloading-perhaps due to my haste to leave and enjoy the beautiful weather! I tried downloading a Remo Repair software but unfortunately this was unable to launch.
Basic notes:
Created on Windows computer cs5
Trying to open on Mac cs5
Sd card used to transfer-couldn't eject, this may be the problem