I am using Illustrator CS5.5 on a Mac.
Sometimes, after moving stuff around (groups, layers or artboards), I notice that hidden objects didn't move with everything else.
How this can be if no objects are locked ?I cannot make this happen on purpose with a simple example and it is really annoying not to be sure that everything was moved properly.
i can't be the only one who thinks it's nuts that when 'auto-select > layers' is selected and i drag to select a bunch of layers, i also select layers that are turned off and/or locked, can i?i just confirmed that this IS not the case with CS6 -- locked or hidden layers are not selected upon dragging to select exposed layers.
is this a bug, or a bit of new functionality that i am failing to grasp? i did notice that in CC, on right-click there is the new option to "isolate layers", but this seems to just isolate & unclutter layers within the layers panel.
improve Photoshop CC, but this bug beaks my workflow to the point I can't use it.
Other than this critical bug, the software engineers behind Photoshop CC are doing a great job.
Is it possible to use the "Rearrange Artboards" option in the Artboards flyout menu and also move not only the artboard itself but also the hidden artwork (layers, objects, etc.) on that artboard?
I have tried check-marking the "Move Artwork with Artboard" option, but that still does not move the hidden artwork. The default behavior seems to be that only the active or visible artwork is moved along with the artboard, but the hiddden artwork is left behind somewhere on the workspace where the artboard used to be before it was moved.
I find this a little cumbersome, since I often hide artwork that I'm testing and having to make them all visible again to just move them with the artboard would break the dinstinction between all the many very similar layers, objects, etc. that I might be working with at a given time.
I have this brand new PC, got it last week, i7 core, SSD drive, 16gb ram.When I open my PSD doc with my design (approx 43mb psd file) then the photoshop application spikes in memory usage, to 3.5gb (from 120mb), and moving groups and layers around is DEAD SLOW, horrible lag.
I had CS3 on my previous PC, which was Core2 Duo with 4gb ram, and the speeds there were similar on the same psd document.I've also tried CS5.1 on a similar PC hardware specs as my new PC, and moving groups and layers around is much faster.Is it just CS6? Why is this so slow?
Having trouble moving objects between layers by simply dragging the right-hand dot to a new layer? CS6 won't let me drag the dot on any kind of selected art from any kind of file I've tried..
Click the name of the desired layer in the Layers panel. Then choose Object > Arrange > Send To Current Layer. Drag the selected-art indicator , located at the right of the layer in the Layers panel, to the layer you want. But method #2 doesn't work at all for me. In fact, the cursor doesn't even change when I mouse over the selected-art indicator dot.
I have a document with alot of artboards. I realized the first artboard started in the middle of the pasteboard so I've run out of room at the bottom. I'd like to move all of my artboards at the same time to the top of the pasteboard.
View 8 Replies View RelatedIn Illustrator CC is it possible to link exclusively specific layers to individual artboards?
View 4 Replies View RelatedAm I to understand if I have multiple artboards, they all will share the same layers? Each artboard does not have it's own separate set of layers, am I right? This is my first time using the artboard feature... CS6.
View 3 Replies View RelatedNew to Illustrator, coming from CorelDraw background, wanting to notch up a lvele or two. I am trying to make a series of business cards, for some people in the same company, and thought I should make new artboard for each business card, but somehow duplicate common text and graphics on all of them. Is this possible with something lika a Transform dynamic effect?
View 7 Replies View RelatedAny script that will create artboards for each separate layer?
View 1 Replies View RelatedScript which would convert the layers in a document to artboards? At present I have a lot of documents with a couple of hundred layers on each of them, but I've decided to change the way that I organise my workflow and started using artboards instead. I don't really have the time to spend moving them individually from a layer over on to an artboard as there are a lot.
View 1 Replies View RelatedI have a complex vector group of objects (logo) that uses text, paths, etc... I am duplicating this grouped object, and trying to design a press wall with the logo repeated multiple times. I duplicate the logo multiple times and place them on the page, but when I try to use the "distribute objects" tool, it breaks up my logo(s) into their consituent objects and distibutes the pieces on the page, which is very annoying... how do I keep my logo together AND be able to distribute it evenly across my banner?
View 10 Replies View RelatedIf CC is a TRIAL program, why would you allow it to blow away layers and groupings when the doc is reopened in CS6? No I have to resinstall CC, open the doc, save it back down to CS6, and PRAY that the layers and groupings are intact. What a waste of my time.
View 2 Replies View RelatedI'm looking for any options that could remove the hidden sections over numerous overlapping objects. I have plenty of objects that lay over each other in this design, and now my client is thinking about getting it screen printed. Is there a shortcut for this that would save me a mass amount of time? (other than using Pathfinder on each and every one?)
View 2 Replies View RelatedMore than a problem, this is a doubt. Well, I was working on an illustration, just trying things here and there, and so I have many different layers of elements, some of them I want show, and some of them not (I don't want to delete them though, cause they may be useful later). At some point I realized that when I saved the file and went to see the preview (space bar) in its folder, the image had both hidden and shown elements.
So this is my doubt: is this normal? is there a way to show the preview with only the shown elements? Of course, when I export the file to .png, for example, I get the picture I should get (without the hidden stuff).
Sometimes I need to copy hidden groups between files to show options like menus or dropdown inputs with closed and opened states. I found new BUG when copying more than one group.
On example it looks like Photopaint remember 2 groups size. Making new document from clipboard with size to place 2 groups in it. But after only one group is pasted.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I'm trying to move an object a certain distance at a certain angle. I select the object and hit Enter to bring up the Move dialog. I enter the angle and distance, and instead of moving the specified distance, it moves some other distance. I don't get it. Am I doing it wrong? I can't imagine how else it's supposed to work. Here's a simple example:
Based on the angle and distance I entered in the video, the duplicate square should have been placed so that its lower right corner touches the upper left corner of the original. Instead, it only moved half an inch or so.
I have selected paths on the artboard and would like to be able to move them into one layer.
As there are a large number is there anyway of moving them to a new layer without selecting them (blue highlighting) and moving them?
They are selected on the artboard so the colour square appears next to them in the layers panel but I can't move them to a new layer without selecting them (even using ctrl or shift is still quite time consuming).
I'm trying to trace a new map using parts of two maps. I can trace the parts I want of one map, imported as a template, but now I want to import the other map as a template, and reposition my tracing over the second template. When I import the second template, it's in the wrong place (as expected), but I can't move my tracing layer to a different place over the new template -- both layers move together. Is there a way of moving layers independently?
View 1 Replies View RelatedAI cs6 64bit window gets all 'blocky'! when i try to move objects, when i click on nodes on a path etc. Please see the video to see what i mean. 32bit is working jsut fine!
View 2 Replies View RelatedWindows7 x64, Illustrator CS6 x64, AMD Radeon HD 6770 1Gb.
On creating or moving any objects I have artifacts like this:
They drawing to the right of the cursor till I hold mouse button. After release button they mostly disappeared.
I have my grid set to 10px (with subdivisions set to 1). Snap to Grid is enabled. I had "Align New Objects To Pixel Grid" checked when I created the document.
When I draw an object, it will snap to the 10px grid as I am drawing it. However, when I go to move the object around, it will not snap to the grid at all. In Photoshop and Fireworks, this was a piece of cake, but in Illustrator I've never been able to get this to work, nor find a solution for it. The only way I can kind of get it to work is to set my grid to 1px, but I really don't want to be zooming in that far constantly when moving things around.
For what it's worth, this is happening in Illustrator CC, but I've had this same issue with older versions as well.
Illustrator CC keeps crashing whenever I try to move a path or an object in a live paint group. I've tried it on other computers, but they seem to work fine. It seemed to only affect my laptop, so I'm not sure what happened. Restarting and updating it doesn't seem to solve the problem.
Here are the technical specifications for my Macbook Pro:
Mid-2009 Macbook Pro 15"
2.8 GHz model w/ SD card slot
Intel Core 2 Duo
Has Mavericks
4 GB of RAM
I'm new in scripting and i need to make a script that moving all layers into a single layer (in Illustrator i press CTRL+A then CTRL+G in layers and works) but i need that in script.
View 2 Replies View RelatedIn CS5, you could move a group/layer/artboard along with all of the child objects, even if some of the objects are locked. But in CS6 the locked objects remain unmoved.
Is there a way to change this behaviour?
I have 3 layers
TEXT
SHADOW
BG
the blending options are normal for TEXT and BG, but I have soft light for SHADOW. Now the BG layer actually contains an illustration which makes my shadow look realistic, however what Im trying to do is, save the picture with a transparent background with only TEXT and SHADOW showing, but as soon as I hide BG, the SHADOW layer will go back to the black color I drew and not look like a shadow. I tried merging text and shadow but either the TEXT gets soft light and gets ruined or SHADOW becomes normal and gets ruined. Its very late, ive been trying to figure it out for the past 4 hours so I hope I explained it clearly.
My problem is when i place PSD file into illustrator, it opens up "Photoshop Import Option" menu, which lets me choose either:
(1) convert photoshop layers to objects (or)
(2) Flatten photoshop layers to a single image
All other options are greyed out (meaning i cannot select them). The above 2 options will embed the image into illustrator, thus when i update in photoshop, they will not auto update.
I dont have this problem in the past (which means i dont get this menu when i use the place function) but it just poped up the last week.But when i open OLD illustrator files which have PSD images not embeded, i am able to edit the PSD and illustrator will auto update.
it is really frustrating to keep placing PSD files everytime when i have changes.
how I can put my layers into groups now, but there are a few problems I've seen pop up.
First are foremost, when I disable the visibility on a group, if I use the move tool it will select layers from that group that were visible before the group was made invisible. Seriously, there is absolutely no reason whatsoever that I would ever want to move an individual layer that I can't see. This clearly is a glitch and needs to be fixed.
Second of all there is an issue with a layer's mode when it is in a group. For example, if a layer is set to multiply, if it is set in a group it will only multiply on layers within that group. Now this I can see a good use for, but honestly, it is not how I usually want to use layers. I'm not usually trying to separate the actual graphics in my image, I'm just trying to organize my massively long layer dialogue into something more useful. It's great to collect different aspects of my image and keep them all together. But basically every time I need a multiply layer or other effect, I need it to effect the whole image. To keep it effecting an entire image I have to make two separate groups, each above and below the layer, in order to organize my image.
Now, since there is certainly an advantage that could be given by not having such layers have any effect outside of their group, I can't argue that the feature should be removed. However, I do think it would be fantastic if a property could be added to a layer group that would allow for such layers to effect the image outside of the group or not.
The third thing I have to say about groups is linking. First of all, as it stands, when I activate linking on a layer group it has absolutely no effect, making the option redundant. However, what would be useful is if I could link an entire group to itself and then move every layer within a group in tandem.
Often times I want to move several groups of layers around so I can arrange a composition. For a simple example, maybe I have several images of characters, each built with a layer for flats, lighting, textures, etc. And to arrange the composition I want to move the whole character with all its layers to one spot, then grab another character with all of its layers to another spot.Conventionally, there are only two ways I can do this. Either I flatten each of those groups and move them as single layers, destroying my ability to alter them with any level of convenience, or I have to manually link every layer for that character, move it, un-link every layer, link all the layers in another character, and repeat.But it would be so much nicer if I could link all the layers within several groups, and move each group as a whole without moving any other layers.
Since the link option on a layer group doesn't do anything anyway, it seems reasonable to me that enabling it should have that exact effect. Using the same example, if I have each character in its own group, I activate the link option on all of those groups all at once, and then I can grab a layer on any group and that whole group will move, but not any other layers.Even if it automatically linked all the layers in that group to all other linked layers, it would still be much easier to activate and deactivate the link on just one group each time I move that one group, rather than each individual layer.
I have a scene with hundreds of copies of an object. Is there a way to see a count of these objects that all have the same name.?
View 2 Replies View RelatedIs there a setting that allows grouped objects from different layers to be ungrouped and they return to their original layers?
View 3 Replies View Related