New to Illustrator, coming from CorelDraw background, wanting to notch up a lvele or two. I am trying to make a series of business cards, for some people in the same company, and thought I should make new artboard for each business card, but somehow duplicate common text and graphics on all of them. Is this possible with something lika a Transform dynamic effect?
View 7 RepliesI am using Illustrator CS5.5 on a Mac.
Sometimes, after moving stuff around (groups, layers or artboards), I notice that hidden objects didn't move with everything else.
How this can be if no objects are locked ?I cannot make this happen on purpose with a simple example and it is really annoying not to be sure that everything was moved properly.
I've came across a thought, how to transform a grouped object. like in Photoshop when we use the distort transformation, we can manipulate the corner points for a particular occasion. Here in the example I have 3 rectangles one smaller than another, and I I have grouped them. Now I'm trying to figure out a way how to adjust the shape into the grey one. I have used the free distort tool, but does no justice. because there is no preview so I cannot see how it adjusts. I'm only after the equivalent of the distortion like in Photoshop.
View 4 Replies View RelatedI was wondering if it's possible to do what Effect > Distort & Transform > Transform does from JS. I had a look at the documentation and found nothing in that direction.
The closest thing I found was PageItem.applyEffect(effectXML) looking at the Object Model Viewer in Extend Script Toolkit, but couldn't find documentation for it and I suspect it might have something to do with SVG filters perhaps ?
In conclusion: Is it possible to apply a Transform effect from JS (and if so, how )?How can applyEffect be used ?
1. I have a box shape, with a transform effect applied on it that copies the box 5 times horizontally.
2. I want to use these 6 boxes as a clipping mask.
3. How do I:
a) Directly use this object as a clipping mask? Doesn't look like it's possible. When I try it only uses the original single box as the mask. The other 5 boxes disappear.
b) "Break" the box shape object into 6 separate boxes so that they're no longer "phantom copies" but individual objects that I can then group to form a real clipping mask.
I'm trying to make a 3D cross section of a building in Illustrator CS5 and I've gotten a lot done already, but now I cannot transform the objects in 3D perspective space.
See Attachment: I can draw and position them in perspective, but when I select the "Perspective Selection Tool (red)" and select an object, the handles in the corners / sides are not visible anymore (blue).
Working with two text characters - created separately. When I transform one they both transform. I want them to behave separately.
View 2 Replies View RelatedHow do I "flatten" the Transform Effect in the Appearance panel so I can edit the copies as individual objects?
View 2 Replies View RelatedWhen memory errors are occuring, which is the preferred method for repetitive objects: placing linked images or placing symbol instances? I'm using Windows XP and Illustrator CS5. I'm considering whether to create symbols for several of the often recurring placed images.
View 5 Replies View Relatedresizing objects by changing the width and height values in the Transform window, while keeping the proportions of the object? When I try this in CS6, the proportions of the object gets totally botched.
This is what I do:
1. Draw a straight line that is rotated some 30-40°.
2. Select the line and click in the W: or H: fields in the Transform window.
3. Make sure that the "Constrain Width and Height Proportions" button is selected.
4. Press and hold the up arrow key on the keyboard.
5. Watch how the line is rotated as it is scaled.
I notice that while I'm pressing the up or down keys, the number in the selected width or height field is incremented nicely (21 mm, 22 mm, 23 mm, 24 mm, etc.), but when I release the key, it is adjusted to a seemingly random number (for example 24 mm -> 24.168 mm). If I switch between pressing up and down for some time, the adjustment can be even more random (24 mm -> 58,944 mm).
I recently upgraded from CS3 where this type of scaling worked flawlessly. I'm using a MacBook Pro with OS X 10.7.5.
An Area Text Object is created...
the Transform Effect is applied to it (a rotation).
The text rotates, but the fill disappears...
whether it's the original object or if copies are added.
I have turne off Snap to Grid, and Snap to Point.. and I have made sure "Align New Objects To Pixel Grid" under the Transform menu is turned off, yet still my objects are snapping to point intersects... am I missing something?
View 5 Replies View RelatedI'm missing transform handles and unable to edit objects or text boxes in Illustrator CC. How do I fix this?
View 2 Replies View RelatedMy designer has created an Illustrator file on his Mac that has linked images. When he sends me the all the files and I open the ai file in Illustrator CC on my Windows PC, I need to re-link the images. One image can't be found at all.
However, if I open the file in CS4 it finds the linked files no problem.
Is this some bug in Illustrator CC for Windows?
Why the drawing title in my dynamic block will not scale up or down. The rest of the objects scale properly but just this the drawing title text attribute will not follow suit.
I tried adding position point and link, etc....I run out options and don't know how to fix this.
LT 2012 user
AutoCAD LT 2012
Windows 7 - 64 bit
how to create a self generating space (static stars/particles) which is driven by the movement of the 3d camera.
The reason I ask is because I need to create a space flythrough over a long period (3mins) and i don't want to create a huge volumetric space to simply fly through as it seems very inefficient. Plus it has the drawback of the partcile cloud being visible at the boudary of the volume due to the lack of particles the other side of the volumetric boundary.
What the particular effect would need to do is act as a volume attached to the cameras position and rotation which generates particles at the exact opposite velocity of the camera so it gives the illusion that the particles are static and that the camera is flying past them.
I need to prepare a linked chain araound a defined path. (Please have a look at the attached drawing) My idea is to have one element of the chain defined as a dynamic block and to manually "rotate" one side of the chain element. After that inserting the next element (previously aligning the user coordinate system) and "rotating" the right part again to the next position...
After doing the rotation, the block definition will change and the next block will be "disformed". So far no big problem, but the grip of the rotation parameter will stay there and I am not able to "rotate" the right part back into the old position (0 degree).
I created a smart object with linked adjustment layers. I made them into a group. (I also tried this with the layers just being linked, and not grouped.) I want to move the smart object, with its adjustment layers, into another document. Ideally, I'd like to do this using "replace contents." When I do so, the smart object comes into the destination document flattened with its adjustment layers. Is there some way to keep those adjustment layers linked, not flattened, to move with the smart object layer?
The workflow I'm trying to achieve is to remove blemishes, etc. and make my all changes to my layer that I'd want to have made no matter what size and context I use that layer in. That is, make one smart object I can slot into a postcard, a 14 x 11 print, and other products. I don't sharpen until I have moved the layer/smart object into my target document, so that sharpening is appropriate for the final print size. Depending on the size and context, I may want to make changes to the levels/curves/hue saturation type adjustment layers though, so having these flattened when I bring the smart object in to my target document is disappointing.
find way to create linked objects in AutoCad from C#?I mean - for example, circle and some lines lined to this circle:
- If I move line it should be possible to move only one end point of line - second endpoint should be linked to the circle and not moved.
- If I move circle it should be move all endpoints of all lines linked to this circle.
In general I want to create network diagram ("graph" in mathematical terms) from C# code.
The previous version of PS CC had been working fine for me but today I installed 14.1 and I started noticing that when I would select an object and then hit "control t" that not all but many of the layers would kick back this response "Could not transform the path because the selected portion of the path does not enclose any pixels." Many of these are images and text. I don't see the problem happening with vector shapes. The one work around I found was to turn on the "Show Transform Tools" in the select tool panel.
Mac 10.8.4
PS 14.1
Proc 2.93 i7
Mem - 16gig
I'm an experienced CorelDRAW user (so I do have some vector graphic experience) but a noob to Illustrator and trying to evalutate switching.In CorelDRAW when I export an EPS it doesn't matter what size paper the CorelDRAW file uses, the EPS bounding box is only the size of the drawing.
In Illustrator, however, it seems that I have to set the art board to the size of the drawing. Otherwise when the EPS is pulled into another program (like InDesign) the frame created is much bigger than the actual drawing leaving white space around the drawing.
Is there an EPS setting I'm missing somewhere that would make AI set the bounding box to the drawing and not the artboard?
Or (as most of the Illustrator files we'll be working with are created by someone else) is there a way to automatcially set the size of the paste board to the size of the drawing?
Is it possible to re-order your artboards? If so, how?
View 2 Replies View RelatedI need to create two art boards in my design document. They are off by a pixel and won't line up like some weird snap feature is on. I've checked and turned off all snap features. Still not lining up.
View 1 Replies View RelatedI'm using illustrator to add some bits to .DWG files from AutoCAD, and then exporting them as .SVG files WITH the artboard.However, when i open them, the artboard has changed it's X and Y from X:0 Y:0 to X:-0.5 Y:-512, the artboard is 512px by 512px.
Also I have noticed that when opening a .dwg file and scaling it on to an artboard, the Y co-ord jumps to -512, but the X stays at 0.Is there a way to constrain these X and Y values so that they are locked at 0?
I have a document with 20 Artboards. When I resize one it only changes that one. I'm in CS5. Is it possible to resize all artboards at once the way you used to be able to do in document set-up?
View 27 Replies View RelatedIn Illustrator CC is it possible to link exclusively specific layers to individual artboards?
View 4 Replies View RelatedEverytime I close a file, it deletes all the custom artboards I set up. Is there a way to save them?
I'm on CS5 PC
When I try to scale down a Smart Object, by using the Free Transform tool, I get over-sharped edges. Mind you when I do the same on a raster layer I can overcome it since there is an option box where I can choose interpolation method.
View 4 Replies View RelatedThe document I am working on has two artboards (front and back of a document) and I am trying to center some text on the artboard. The issue that I am having is that when I try to align something to center on the first artboard (the left one) it moves it off that board and aligns center on the 2nd artboard (the right one).
I have about 10 other files with this same set up (two artboards, multiple text boxes) and have never had an issue with alignment. As long as "align to artboard" is selected Illustrator never moves the text box to the other artboard to align it.
Illustrator CS6I have multiple documents that someone set up. I want to make the artboards the same crop size. 8 to 16 page illustrator files, and I'm sitting here selecting each and entering the size manually.
View 1 Replies View RelatedI am working on a large wall sticker and I need to "slice" the image into pieces for vinyl printing. Is there anyways to place guides (or slices) and have them be converted to separate art boards for printing? In the past I would make individual art boards the exact size of each object and save them one at a time to send to the printer. Then once the art came in I could piece the wall art back together as I applied it to the wall or glass, But this is time consuming.
View 1 Replies View Related