Whenever I make a pattern in CS6 and repeat it there is always a line showing up on the initial boundary box. The objects are over the boundary line and should not be a problem. Below you can see the line break in the pattern.
View 12 Replies
I love the new Pattern Maker in CS6, but I keep running into a problem:
When I create a pattern that is NOT tiled in Grid (i.e. Brick), it usually works without any problem. But once I save and re-open the file, opening the pattern in PM again will show this message:
A clipping mask was created around the pattern tile bounds to preserve legacy pattern appearance. For best results, release the clipping mask when changing the tile size or editing art that overlaps the tile edge. I would then find that, instead of a single motif layed out in a Brick tile, I would have one complete motif in the center and four quartered motifs on the corners of one clipping box. This is tiled in a Grid pattern to emulate a Brick appearance.
So long story short, what's supposed to be a Brick tile turns into a Grid tile that's faking a Brick tile.
Is there a way to keep the simple Brick tiles?
It may be the way I'm using this feature and I've just missed it - it appears to me that you can't have a solid background to your swatch because the way it stacks/overlaps elements means that you will end up cropping some elements on some sides.
Try it just by putting a solid shape the exact size of the tile.
I have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
View 2 Replies View RelatedI was reading about the pattern maker filter in Photoshop but can't find it under the Filter menu. I have CS4 and thought this would be an interesting feature to use but can't find it. Is it not available in CS4?
View 1 Replies View RelatedI wanted try cloning with pattern maker, using part of a photo, but says, "already in the presets"
View 9 Replies View RelatedWhat is the alternative for the missing pattern maker, who could generate random patterns?
View 2 Replies View RelatedWhat happened to the Extract and Pattern Maker filters in Photoshop CS4?
Are they gone or placed somewhere else?
How can I create a tileable line pattern like the one on the image? (Illustrator CS5)
Is there a more practical way than drawing and duplicating lines? When I do that, and fill a shape with the pattern, I see gaps between tiles. Do you remember the same pattern on Microsoft Word? I want to create that, on Illustrator. Which method should I follow?
I'm on the brink of insanity with creating my diagonal line pattern. I've tried everything I can think of but the pattern is an absolute mess! I want to create a diagonal line pattern but I want the lines not to be uniform. Basically I've made a group of 3 lines and then one separate line on its own, then to repeat this as the picture below. I've used the distribute function so the distances between the lines is identical everywhere. I've then rotated the whole thing exactly 45 degrees and aligned the lines to fit the bounding box in the "make pattern" mode as shown. Yet the resulting pattern is just a mess of overlap ugliness. All I want is for the pattern to literally look as it does in the image on the left, how to sucessfully do this in CS6?
View 6 Replies View RelatedWhen making a pattern into a swatch and applying it to letters, I am noticing that you can see an abrupt point where the pattern stops and repeats. How can this be done so it is not visible?
View 2 Replies View RelatedI have created polka dots or even more complicated pattern in previous version illustrator. They are perfect. When i migrated to the CS5, the exactly same pattern always have a fine line in between the pattern swatches. After i export the artwork to jpg in 300dpi, they are still there.
View 16 Replies View RelatedHow do you achieve the graphic line movement.
View 3 Replies View RelatedI am making a flyer for my customer, in Page Maker. They are a florist, and I have edited the images from FTD etc to their standards.
I have run into a problem though. I have traditionally put FTD's logo directly on the images while I am editing them. A request was made, that all logo's would be the same size. In order to do this, I need to have the logo as a separate image with an opaque back ground in Page Maker.
I have been unable to paste in any images (.tif) with opaque back grounds. This is probably due to the fact that our printer has us use CMYK. Yet, photoshop can handle CMYK with opaque back grounds just fine, why cant Page Maker?
I played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View Relatedi'm using illustrator cs5. making a pattern containing a pattern. i have some illustrations that i've put a simple polka dot pattern behind. in order for illustrator to accept it as pattern, i've been expanding the polka dot part before dragging it over to the swatches panel. however, when i do this it slows everything down tremendously and usually makes the system crash.
View 10 Replies View RelatedI have a drum scan of a 6cm x 6cm black and white negative with an emulsion defect that looks like a line pattern. It's pretty faint but noticeable (I'm printing 40" x 40").
How can I get rid of them ?
i want to use a diagonal line pattern like the one they use but im new to photoshop and i dont know how to create a diagonal patten.
View 5 Replies View RelatedI've tried 2 create a pattern similar. But the edges are jagged. And I can't find a tutorial on this (even though i swear that I saw one on this before).
View 2 Replies View RelatedI am using revit LT 2014 and just can't get a material to be be painted on a wall. I would like to apply a 6" veritcal line pattern to look like v-groove board - I create the material, applied the pattern, but when I use the paint function I get nothing
View 1 Replies View RelatedI would like the section line to have a special line type and color. How can this be changed?
View 1 Replies View RelatedHow to get the brick hatch pattern on my elevations to line up between levels. I have a two story residence with one wall the front that has brick all the up to the roof (the rest of the house has cement board side on the second story). My problem is that the brick pattern on the second floor wall does not line up with the brick pattern on the first floor.
I tried to just extend the first floor wall up to the roof, but I did not like how it wrapped around the corner of the second floor to tie in with the siding. Surely theres is a way to set the hatch patterns origin like in ACA so that all the bricks line up nice and pretty. Also would lining up the brick pattern on the quoins, which are, whatchamacallums... in-place-edit components?
is it possible to change the line patern of leaders in text notes, from solid to dash or another one? I know I can change the tick type but can´t find anything for the line.
View 2 Replies View Relatedhow to control the surface pattern line weights independently?
View 2 Replies View RelatedI had it before but because my computer crashed I had to redownload everything. I know bummer right? Well, anyways I need a grid maker that will automatically make me a 32x32 grid or any grid I chose to make my sprites with.
View 3 Replies View RelatedI've been using garment maker modifier for some time and soon the modifier is just not enabled anymore. Is not in the stack of modifiers and not in modifiers menu.
View 2 Replies View RelatedI am facing small problem with inverter drafting. I am unable to show hidden line of pattern by direct selection of all object . I have to select one by one item from pattern.
In my drawing there is tie rod item ( find attached file) i have shown hidden line of only this part . and i have to select all items one by one.
I have a series of pics create din photoshop but I need to turn it nto a simple animation, like stop frame, one still after the other. Can I create it in Photoshop? If not are there any programs out there that can do it for free? I am about to buy Flash but I want a free programme today, I'm using Mac OSX 10.4.9.
View 2 Replies View RelatedI am creating graphics like a scroll and need uneven edges without having to draw over everything (and wobbling) with lasoo tool. Is there another quick way to get an uneven effect?
View 2 Replies View RelatedI have some embedded images in Frame Maker that I need to edit in Photoshop. I copy the image from FM and paste it as a new image into Photoshop. Most of the time its OK, but sometimes it comes up like this, or worse.
It should look like this.
Pasting the image into any other program (i.e. Word, Visio, Paintbrush) works, but it takes more time to fix it, the size is usually off and needs adjusting, and the output is of lower quality.
In FM, the images that seem to do this are JPEG / Frame Vector or PNG / Frame Vector according to the Facets field.
Trail version of ProX5. I have made labels in a project and have set the text alignment to "center", but when I switch to the other label, it does not remember my text setting, sets back to left justify. Happens on both labels. Each time I go from one label to the next it asks me to save, I do this, but center justify still does not save.
View 3 Replies View Related
