Illustrator :: Making A Map-style Blowup Section?
Sep 26, 2013
I'm working on a vector map and I'd like to be able to take a section of it and blow it up to the corner in typical map manner. I was able to accomplish what I was trying to do in Photoshop: [URL] but 1. it's pretty obvious where the non-vectored parts are, and 2. I'd like to keep the workflow for these as simple as possible (i.e. in a single program). I got part of the way there with the Crop pathfinder tool, but it only includes shapes and not paths in the cropped selection (so no roads or rivers).
View 2 Replies
ADVERTISEMENT
Mar 26, 2012
C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
View 1 Replies
View Related
Jul 27, 2010
We have a project where the alignment is not in the center of the section (it's along one edge of the project), but we want the Title Annotation ("STA. 165+00") to show up in the center of the sections.
If you choose "Center" justification in the style, it "centers" it about the zero offset, which in our case is actually the left side.
Is there any way to truly center this call, short of turning it OFF and manually creating separate labels?
Unfortunately, I can't use "Center" and give it a "Y" offset, because the alignment does vary slightly (±30 feet) within these 250' cross sections - which would cause the label to vary by that much also...
View 2 Replies
View Related
Sep 18, 2012
Every time I go into Section Editor while working on my corridor I have to reset my Code Set Style Selection. Its not even like I am exiting and re entering the drawing, just the Section Editor. Is there a specific place C3D looks for that style when you enter the editor?
Civil 3D 2014
i7-3930K Overclocked
32 GB Ram
Windows 7 Professional
View 2 Replies
View Related
Jul 8, 2011
I want to section my assemblies to show some internal detail, but sometimes it is hard to tell what is part of the cut and what isn't.
Is it possible to colour the sectioned area red instead of having it look like a slice through a block on concrete?
By the way, this is in the model environment, not the drawing environment.
Windows 7 Pro (X64)
Intel(R) core (TM) i7-2600 CPU @ 3.40GHz
16.0 GB RAM
Nvidia Quadro 600
Autodesk Inventor 2013 Professional Ultimate Design Suite
View 4 Replies
View Related
Mar 29, 2012
I've been having the issue with code set style and making the section view to look the way I want. I created a new code set style and it shows perfectly the way I want in the assembly. When I create the section views, I specify the sections to have the same code set style, but for some reason, it shows up in a different color.
I provided an example showing the fence line as an assembly and in section view. For "mysterious" reasons, the color is different in the section view than in the assembly. And I've checked many time in the section view properties and assembly properties to make sure that both are displaying the same code set style.
View 5 Replies
View Related
Feb 26, 2013
I have a slab with a edge style for a thicken slab (haunch). I have the materials for both objects identical. When I make a 2d section, the slab on top of the haunch does not clean up with the haunch on the bottom. When I go ACA out of the box slab & slab edge styles, there is a thicken slab (slab with haunch) live section the way it should look. I can't reproduce it even when I bring it in to my drw. from the out-of-box Does it have something to do with 2d section? This might sound simple but I'm just not able to figure it out how to make things cleanup.
View 1 Replies
View Related
Jul 11, 2012
How would I go about creating a cross-section band style in C3D 2012 like the one attached?
View 6 Replies
View Related
Apr 17, 2013
I have section views created from corridor model that also have had materials computed. The cut and fill areas are hatched solid and I want them set as another hatch style but after attempting to adjust the pattern it does not change. How does one change this and have it show? Civil 3d 2013 is currently being used but may have to back track to 2009.
Dell Precision T3500
Windows 7 x 64
Intel Xeon @ 3.07 GHz
12 GB RAM
NVIDIA Quadro 4000
Civil 3D 2013
View 7 Replies
View Related
Jul 3, 2012
My problem now is that i have piles of gravel & sand, i got the volume on each pile for and now want to make a cross section drawing showing the elevations on them. I went to section views and create mutiple views but it asks me for a aligment, but i just want to base the drawing off the contours of the piles (elevations)
View 5 Replies
View Related
Feb 26, 2012
What I would like to achieve is a section band style for bulk earthworks and simple access roads that shows the design level at Grade Breaks only. The problem I am having is that Grade Breaks are being recognised as where the sample line crosses a triangle, not where the the grade actually changes/crosses a feature line.
A have a number of simple platforms, that I have created using an infill from feature lines, usually these platforms are surrounded entirely by feature lines of the same height. As to be expected, Civil 3d creates a few flat triangles, and as a consequence, all of the points where the sample line crosses these show up on my band style. Is there any way to achieve this band style?
View 2 Replies
View Related
Nov 12, 2013
It's possible to do a cut view with the cup part with a different view style from the other "not Cut" half.
I achieve that, whit the cut view + normal view croped hover the cut view... but this isn´t a accurate process...
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
View 5 Replies
View Related
Mar 1, 2014
Is it possible to cut out a section of a Placed PNG in Illustrator without doing a Trace Bitmap?
View 4 Replies
View Related
Mar 10, 2013
I have created two images that have gradients applied to them and want to join them together with the gradients.I can't stretch the image because the lighter gradient follows and I just want that on the outside edges of both as shown in the image.
In effect - i want to take a small slice of the darker gradient and continue it on the x-axis to the other image without distorting the gradient effects.
View 2 Replies
View Related
Sep 11, 2013
I want to cut (or copy) a section from an image on my artboard, but I can't see to find a way to do it. For example, in Microsoft paint I can use the select tool to draw a rectangle around part of the image and Copy or Cut that selection into the clipboard and paste it back.
I know I can cut this out and paste it onto an Artboard, but I am curious about the capability in Illustrator.
View 15 Replies
View Related
Feb 6, 2013
I have an object that i need to cut a section out of the middle and bring the two remaining sections together.
View 5 Replies
View Related
Jul 29, 2013
I have made a circular crest type image with a uniquely defined stroke (so it looks like a stamp). I want only the outside of the stroke to be bump and the inside be smooth (of the circle). Before I was just layering other white circles over it but now I need the inside to be transparent. Is there a way I can convert my stroke into an object so I can easily erase the bumpy inside? How else can I get around this? Top image is what I have, bottom image is what I want. Only to have a transparent center.
View 5 Replies
View Related
Dec 9, 2013
I am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies
View Related
Nov 1, 2013
I'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
View 1 Replies
View Related
Feb 20, 2013
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies
View Related
May 21, 2012
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
View 8 Replies
View Related
Jul 17, 2013
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
Sep 24, 2012
The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
View 6 Replies
View Related
Mar 15, 2014
Why Can't I make a New Graphic Style in Illustrator CC? Nothing works. I've tried several options to make a Graphic Style. Even tried to copy another and change it.
View 3 Replies
View Related
Dec 2, 2012
I had a good piece of it today when all I wanted to do was a simple basic brush stroke. But instead Illustrator forced a weird fancy stroke no matter how many times I tried to change the settings. URL....
View 1 Replies
View Related
Aug 13, 2012
I am getting font style(like regular, bold, italic etc) like this-
while (count < fontCount) {//loop , which iterate throgh used fonts.
ATE::IFont currentFont = fontRefArray.Item(count);
if (!currentFont.IsNull()) {
FontRef fontRef = currentFont.GetRef();
AIFontKey fontKey = NULL;
result = sAIFont->FontKeyFromFont(fontRef, &fontKey);
result = sAIFont->GetUserFontName(fontKey, fontname, 50);
result = sAIFont->GetPostScriptFontName(fontKey, psname, 50);
result = sAIFont->GetFontStyleName(fontKey, stylename, 50);
result = sAIFont->GetFontFamilyUIName(fontKey, familyname, 50);
}
For some fonts(not all the fonts) , Style name is comming as empty string, however for other fonts its working. Not sure why its working for some fonts and not for others. Other font properties are coming fine for all fonts.When its failing, result is not kNoErr, but i dont know that how to get the exact error?
View 4 Replies
View Related
Aug 2, 2012
is there a way to do trimming autocad style?
View 2 Replies
View Related
Jul 26, 2013
I'm studying design but I have some trouble with this simple thing. I don't know how to achieve this effect in the best and natural way possible.. Is that a brush? how do you call this shape/brush.
View 7 Replies
View Related
Nov 19, 2011
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies
View Related
Aug 12, 2013
In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies
View Related
Mar 5, 2012
I think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
View 3 Replies
View Related
