Sometimes I need to make corrections to pdf documents that are protected. The way I do it is printing them with bullzip printer and then I open the converted pdf document in Adobe Illustrator to make the corrections. But sometimes when I open the document in Illustrator most of it is blank or with very strange characters. You can see an example of these strange characters in URL...
View 2 RepliesCan 'Enable Profile Corrections' in Lens Corrections be checked as a default?
View 2 Replies View RelatedUnder Linear Curve, I do not have the "channel choice" option in LR4.4. (I just upgraded)
Also, I seem to be missing "Enable Profile Corrections" from Lens Corrections.
Can you make a members area using the password protected feature?
View 1 Replies View RelatedMy end result is to make corrections on a digital image and save to print.
Open image from digital camera
Duplicate
Crop, make any corrections
Image Size – change to the size I want and resolution to 300
Save and print
I have tried all the basics, deleting preferences etc.
View 1 Replies View Relatedis this possible to make it default for the all the documents of coreldraw something like gray tone despite of white. Â option existed in the options command but i have to go and has to choose the color. Â Its not like that, at once by default that white color is changed to the gray tint.
View 5 Replies View RelatedI have been struggling today with an issue I've encountered with my documents that I made in Illustrator, then had them uploaded to the web. The document displays big squares around all the paths in my document, containig text and gradients inside them.
Â
When I open the document on my laptop, using adobe reader, it displays correctly, with no hassles, but when I upload them to the web, or even drag and drop the document in to my browser, these big squares appear. I'v etried different PDF settings to try and fix this, but it's not working and as a temporary solution, the document was uploaded as a PNG.
Â
The document itself isn't linked to any =thing, it's just a document that opens when you click on the web button to view it, and then you can download the pdf document from the website.
I scanned a worksheet containing chemical structures with VueScan 9.3.14. I tried to use acrobat 11.0.5 along with the highlight tool to highlight parts of a chemical structure. Adobe did not recognize all parts of the chemical structure. Some parts (mostly single covalent bonds between 2 atoms) could be highlighted, but other's could not. Those parts which could not be highlight were important parts I was aiming to use acrobat's highlight tool for. I was hoping if something like the highlight tool in acrobat could be used in illustrator and/or other third party software.
View 2 Replies View Relatedhow to change the default font for new documents, but how to make it so that you have a preferred default font that overrides Myriad for any document you open. Is that even possible? I receive files from many different sources and most people just stick with Myriad. I need to change that font constantly in documents to Helvetica Bold and want the type tool to just stay there unless I manually change it myself.
View 3 Replies View RelatedHow can I turn hyphenation off for all documents? Is there a way to change the default setting to hyphenation off? I know how to turn it off for individual documents, but I want it to always be off.
View 1 Replies View RelatedI want to open a document and Force illustrator to open it using CM or MM as the Default Units.
Â
i.e If a client sends me an .ai file and they use Pt or Px, How can i get the document to open by default with Centimeters, I've changed it in Adobe preferences but it only applies to new documents.
I am struggling with color variation between different documents in AI. Even when both documents have been assigned the Adobe 1998 RGB color space, and colors are identically called out in RGB, my output varies between the documents. This is difficult as when I do color management is a "swatch" document to get my client approval, then insert that color into a different document, it changes. Any input?
View 2 Replies View RelatedI have two open files in illustrator and I want to use the eye dropper tool to select a color from one document and use it in the other. Is there a way to do this?
View 4 Replies View RelatedI have multiple documents that need to share the same swatches. I can't find a nice workflow for keeping them all in sync. At the moment I have a separate document that I use as a swatch library. Every time I change or add a swatch I have to resave the document as a swatch library, then re-import the library into every document that uses it, then reassign each swatch as changes are not picked up. This is really time consuming.
Â
I am looking for a way to have a single swatch library that is shared between multiple documents, all of which dynamically update when I make changes to the library in the same way that an AI file can be shared amongst multiple documents and will reflect any changes made. At the very least I want to be able to reimport a swatch library and have any object using one of the library swatches update. I have tried placing the library document in the files, but it seems swatches are not carried over.
Â
This is driving me crazy. It seems like once you share a swatch library there is no support whatsoever for edits to that swatch library being picked up by documents that use it even if you re-open the edited swatch library.
I created some sample pie charts for a client - had no problems with the document while it was open. It saved fine, I even saved it as an EPS. However, when I try to reopen the document, it gives me an error (whether I open the illustrator or eps file).
I haven't been able to track down the reason for it. It has 6 sample pie charts on it. The text and labels are simply text or lines drawn on a separate layer. The "hole" is simply a white circle on top of the chart. There isn't really anything complicated with it, so I'm not sure where the error is. I've already recreated this but had the same problem again.
Â
This does not happen for all pie charts - there is another file I created with other samples, and I've been able to reopen that. The odd thing is that even though I get the error, it seems to partially open the file - only a few of the elements show up.
For years, we've been printing large documents to our plotter without issue. Suddenly last week, nothing large will print.
Â
I've seen a few different error messages, and have tried different computers, and different versions of Illustrator, but nothing large will print.
Â
When trying to print, I currently get the following:
Â
I've also seen an error suggesting not enough memory is available, which is bogus. And I think another error that was more vague, something to the effect of "can't print"
Â
I've setup a clean install of illustrator on a clean windows install, same issue. I setup an alternate print server with our rip software, same software we've been using for years. Same error on the alternate server.
Â
Nothing changed, and it's effecting everything here, and new installs. I don't know what happened, but this is getting critical, we need the ability to print.
When I make a pattern on a document and save it, it shows up fine. BUT when I go to my other documents, it doesn't show up on the swatch list for that document (it ONLY shows up on the swatch palette where I made the pattern). It also doesn't show up if I make a new document.
View 1 Replies View RelatedI have recently upgraded to CS6. I have attempted printing full documents in illustrator ( I tried a 12.5x18 document). In the print dialog box there is a preview of the full sized document however when I print it only prints 10 inches of the document. I am printing to a Canon IRadv- c5030/5035.
View 1 Replies View RelatedIs there a way to prevent Ai CS5 from re-opening documents after a crash?
Â
I think a specific document is causing Ai to crash, so after Ai crashes, it tries to re-open the file when I restart Ai, then it crashes again - ad infinitum!
When pasting between illustrator documents all formatting is lost and images do not move over.example, working on a new flyer, I often borrow from existing flyers since copy and pricing is good, just usually making flyers that have different combinations of products etc.
Â
So I select some text boxes and images from one illustrator document, control copy and then try to control v into another illustrator document and all that gets pasted is the text which is formulated. You'd think i had copied and pasted something from notepad.
Â
The problem does not happen 100% of the time, but it's like 50/50 it seems.Sometimes when the problem occurs, I'll spam control c a few times and then control v will paste as you'd expect. But the problem occurs whether I use control c, or edit copy.I'm using CS3..It even happens when I try to cut and paste within the same document.
I run AI CS6. I open new document and prepare two shapes and fill them up with Pantone colors for reference, for my design. I procced to make some work, name cards for example.
Â
Now I want to send the card to my printer, while I work on the rest of colleterals. So I open new document, identical to the one I oppened 30 minutes ago. I don't change color setting or anything. But when I paste the cards to new document, they change color.When I sample the colors, the Color Pallet identifes them correctly by thier pantone number.
Is it possible, when you have three different documents open, to zoom in all three documents simultaneously? Or to move around with the hand tool in all documents simultaneously?
Â
I'm running Illustrator CS5/CS6
I'm trying to open some AMD partner logos, and they're in EPS format. I tried opening them in PSPX2 originally, and it gave the error that "This PostScript file is either not valid or contains unsupported features" so I tried PSPX3 and the same thing is happening. I tried opening them in Notepad to see if there was anything in there to identify the program that was used to create them and it appears to be Illustrator 13. I don't have Illustrator 13, so how do I resolve this issue with PSPX3?
View 3 Replies View RelatedWhen I open an Illustrator file with many layers, nested groups, etc. I have to spend the first minute or so closing all the nested layers in the layers palette.
I've searched for a preference but can't find anything to tell Illustrator to open with all layer triangles closed. Is this possible?
Why is Adobe Illustrator CS 6 so slow when I want save a document with many and great images. Very much slower than Freehand.
View 10 Replies View RelatedIt seems as though the axes in my Illustrator CS4 installation are rotated. Whenever I create a new object, the new object is rotated about -5.2º. When constraining the rotation of objects, the rotation is never square to the document edge. How do I fix this?
View 2 Replies View RelatedWorking on Adobe CS6..A sign maker has asked me to submit my artwork for different signs (quite a few of them, in different-sizes) as EPS with crop/trim marks.
Â
For instance: The size of this sign is 24"x24" with a .25" bleed. The Artboard shows the right size, and the crop marks show uo as they should. But once I let go of the Artboard, no crop marks show on my screen.
Â
Any crop mark I try adding via the Object ("Create Trim Marks") or Effect menu for crop marks, both cases would create them around the BLEEDS, rather than the REAL ARTBOARD, which, of course, defies the purpose of a crop or trim mark...
Â
I usually submit files for production saved as PDF w/bleeds & crop marks, but this sign maker wants them as EPS.Is there a way around it, other than create those marks manually?
I have a Macbook Pro ver. 10.6.8 i7 Core, 8 Gb Ram, and I am running Adobe Illustrator CS6.
Â
I have a document that is 18" x 42" and contains drop shadows. It was created using CS6. When I apply a graphic style (gradient and drop shadow) It has a progress bar that says "Drop Shadow" and it fills up and freezes. I recreated the document, and I am having the same issue repeatedly.
Â
In order to do what I needed, I had to ungroup the letters recieving the graphic style and apply it to each letter individually. If I try applying it to more than one object, the freeze happens again.
Â
I saved the file I created, and now I can not open it. On load it has a progress bar that says "Drop Shadow" and it fills up and freezes.
Â
I can open the same document in CS4 on the same system with no issues, it takes less than 5 seconds to load.
Got this Problem since 16.0 to 16.0.1 update. I´m working on a MacPro with OS X 10.6.8.
View 3 Replies View Relatedis there a preference so that I can turn off documents opening full screen?
View 4 Replies View Related