I used to be able to create groups of objects, and groups of groups, and be able to drill down to the object level by double clicking with the cursor. Now I can't. What would cause this?
View 22 RepliesI have a part that we will cut out on a CNC plasma machine that will undergo a drilling operation. We create all the parts that will be cut on the plasma in the sheet metal environment because of the simple flat pattern export. Our plasma machine has the ability to scribe lines and also create center punch marks. It distinguishes between cut lines, scribe lines, and center punch marks by layer name. I need a way to get the center points of the drill locations into their own layer.
View 9 Replies View RelatedI just discovered survey figure groups and am playing around with them. Great way to bring certain figures in & out. What seems crazy is that I have to check them on/off one at a time. Am I missing something or is this the only way to add figures to a figure group?
View 2 Replies View RelatedI am running Illustrator CS5 on a Laptop PC. I am constantly installing new fonts to work on customer projects...
I have noticed that sometimes the fonts appear in the font list in alphabetical order, and sometimes they appear either towards the top or bottom (not in order), or they are in a completely separate grouping at the bottom of the list. Is there any fix for this? I'd prefer that they all be in Alphabetical order if possible...
there is probably a simple solution to this but I am stuggling to create a paint group in CS of multiple paths. I have been stuck with doing some work on Illustrator 11, and not familiar with these old versions. I am a CS4-6 user and am used to the select all paths.... Live Paint ... good to go.What is the procedure in the earlier versions ? E.g., a compound path required ?
View 1 Replies View RelatedIf CC is a TRIAL program, why would you allow it to blow away layers and groupings when the doc is reopened in CS6? No I have to resinstall CC, open the doc, save it back down to CS6, and PRAY that the layers and groupings are intact. What a waste of my time.
View 2 Replies View RelatedI'm working on a proprietary project that has lettering with a white rectangle overlaid in Screen mode at about 35% to convey the idea of a metal surface to the viewer (similar to how the apps launch buttons in iOS have that glossy sheen). My question to you all is, when I have worked on the design in Illustrator and pulled it into AE the white box in Screen mode is visible and affects the layers below.
Now, I thought there was a way to isolate blending modes to groups or layers, so that anything outside of that group/layer would not be affected. Is this correct? My workaround at the moment is to boole the box so that the screening geometry fits to the lettering, — an arduous process. Attached is an example of the effect I am going for. Ideally I'd like to keep my screening box whole so that I can play with the angle of the faked reflection without having to go through the boole process again.
I'm in need of fitting 10 groups on a document so that all 10 groups take up the least amount of space. To do that some of the groups need to be rotated when doing this manually. Is there a way for Illustrator to do this automatically? Ditributing and rotating several groups to take up less space on a given document size?
View 1 Replies View RelatedIs there a way, to export grouped items out as a png file? I got like 19 artboards with a lot of groups on each. All these groups has to be png files, so I can animate them in After Effects.
Right now I am copy/pasting the groups into a new illustrator file saying "save for web and devices" but it takes to long time if there is an easier way
I jumped to CS6 from CS3 and am a bit confused. I create graphics for stock imagery and it is important to minize the amount of shapes. I created my first image with CS6 that has several gradients and my file is enormous because when I viewed it with "Overprint view" it showed that all gradients consisted of several paths contained in a clip group.
View 1 Replies View RelatedI just learned (after 16 years...) that it's been possible to drill down through successive compound objects within groups without using the new V7 feature "Edit inside".
I'd always used Ctrl+Click within a group to select the object in it I want, but could never select just a group that was within--only a single object. But apparently Ctrl+Click is only intended to select the bottom-most (leaf) object of the group (tree). If instead you use Ctrl+Alt+Click, you can click through each level of a group.
So for example if you made two groups of 3 objects and then grouped the two groups together, you can select the whole group first, then one of the other groups within, then one of the objects within that group.
I can't believe I didn't know this. Shows what I know. And what amazes me more is that I didn't figure it out given that you can Alt+Click to select through overlapping objects.
Is there a way to save an lllustrator color group as an ASE swatch library? When I try to do this, the entire library, including all the default swatches, are saved, when all I want are the particular swatches I've added to a new colour group. I want to be able to save swatch libraries for various clients, then be able to access them in InDesign and Photoshop as well. Or alternatively, is there a way to remove unwanted swatches from a swatch library once it's been saved? (Using CS6 on a Mac running 10.8.4)
View 5 Replies View RelatedI have a collection of color groups, that I am applying to grouped objects, but every time I change out the color group, it randomizes the order which the colors are applied.
In the kind of bulk work I'm doing, its really turning into an hours burner.
The specific process I'm using (I've tried several different ways with the same result)
1) Draw my art
2) Group the art
3) Create a new color group with my art selected.
4) Double click the color group and recolor.
5) Save the swatches ----- so far so good
6) Double Click a different color group (or select from the Recolor panel) -- here the other color group (swatches) get applied, but every time I do it, the order of which color is applied to
I would like to divide the green leaves on the image below over the green object on the right so that the leaves create the shape of the lines. They have to fill the space of the green object at a similar shape as it is now.
I tried blend but since the leaves are grouped objects with gradient fills, but then this is the result.I need to divide the leaves along the green shape so they follow the shape.
I have a complex vector group of objects (logo) that uses text, paths, etc... I am duplicating this grouped object, and trying to design a press wall with the logo repeated multiple times. I duplicate the logo multiple times and place them on the page, but when I try to use the "distribute objects" tool, it breaks up my logo(s) into their consituent objects and distibutes the pieces on the page, which is very annoying... how do I keep my logo together AND be able to distribute it evenly across my banner?
View 10 Replies View RelatedI was wondering whether we can disable/enable any menu item/group in Illustrator? I am working on Illustrator CS4, 5 on windows. To be more specific, can we disable the kSaveMenuGroup, so that the save options appear disabled..?? I tried using the methods described in AIMenuSuite structure reference. But, this only disabled the pre-defined groups added by the plugins.
View 2 Replies View RelatedI am using Illustrator CS5.5 on a Mac.
Sometimes, after moving stuff around (groups, layers or artboards), I notice that hidden objects didn't move with everything else.
How this can be if no objects are locked ?I cannot make this happen on purpose with a simple example and it is really annoying not to be sure that everything was moved properly.
How one would go about ungrouping all groups on an active layer with JavaScript?
View 5 Replies View RelatedI'm having trouble getting a script together where I can ungroup all groups in a document, then put everything under a single group. Everyhting I'm working with has a single layer, but for some of the arts I'm importing have groups within groups ect. To run certain actions I've made properly after I need eveything to be in one, single group.
I searched for an answer and found this (wirtten by Carlos Canto)
function ungroup(whereToUngroup, group) // where to ungroup? layer, document, other group?
{
for (i=group.pageItems.length-1; i>=0; i--)
group.pageItems[i].move(whereToUngroup, ElementPlacement.PLACEATBEGINNING);
}
But I'm having trouble getting it to work.
I create all of my lineart for illustrations, in Adobe Illustrator. I use the pen tool in combination with the line width tool to create line weight. Once I have completed all of the line work, I select everything and Expand. This results in not having fills for teh areas of the illustration which need to be colored.
From there, what I do is select everything > livepaint > make. I then fill in each area with a base color, using the live paint bucket tool. Once completed, I again select everything > expand. This leaves me fills that I can select indivually to apply gradients and work with directly.
This process works great until I expand the live paint group. After expanding, there is a very thin white border everywhere that two seperate colors meet. This only happens after expanding, it does not happen when it is still a live paint group. I have tried every option in the expand window, and get the same result.
I have exported the completed work in several formats ( .jpg, eps, .png ) and the lines are still there.
I need to copy shapes over from Illustrator to Powerpoint. Now I'd like to maintain my groups so that I can ungroup them later in Powerpoint. Is that possible? Ideally, Illustrator would copy them in a way for me to change handle positions in Powerpoint later on.
View 17 Replies View RelatedSo I was wondering if there is a way to have a different group for a set of fonts. URL....In that screenshot you have different groups of brushes you can easily click, am I able to do something like this for fonts?
View 3 Replies View Relatedhow I can put my layers into groups now, but there are a few problems I've seen pop up.
First are foremost, when I disable the visibility on a group, if I use the move tool it will select layers from that group that were visible before the group was made invisible. Seriously, there is absolutely no reason whatsoever that I would ever want to move an individual layer that I can't see. This clearly is a glitch and needs to be fixed.
Second of all there is an issue with a layer's mode when it is in a group. For example, if a layer is set to multiply, if it is set in a group it will only multiply on layers within that group. Now this I can see a good use for, but honestly, it is not how I usually want to use layers. I'm not usually trying to separate the actual graphics in my image, I'm just trying to organize my massively long layer dialogue into something more useful. It's great to collect different aspects of my image and keep them all together. But basically every time I need a multiply layer or other effect, I need it to effect the whole image. To keep it effecting an entire image I have to make two separate groups, each above and below the layer, in order to organize my image.
Now, since there is certainly an advantage that could be given by not having such layers have any effect outside of their group, I can't argue that the feature should be removed. However, I do think it would be fantastic if a property could be added to a layer group that would allow for such layers to effect the image outside of the group or not.
The third thing I have to say about groups is linking. First of all, as it stands, when I activate linking on a layer group it has absolutely no effect, making the option redundant. However, what would be useful is if I could link an entire group to itself and then move every layer within a group in tandem.
Often times I want to move several groups of layers around so I can arrange a composition. For a simple example, maybe I have several images of characters, each built with a layer for flats, lighting, textures, etc. And to arrange the composition I want to move the whole character with all its layers to one spot, then grab another character with all of its layers to another spot.Conventionally, there are only two ways I can do this. Either I flatten each of those groups and move them as single layers, destroying my ability to alter them with any level of convenience, or I have to manually link every layer for that character, move it, un-link every layer, link all the layers in another character, and repeat.But it would be so much nicer if I could link all the layers within several groups, and move each group as a whole without moving any other layers.
Since the link option on a layer group doesn't do anything anyway, it seems reasonable to me that enabling it should have that exact effect. Using the same example, if I have each character in its own group, I activate the link option on all of those groups all at once, and then I can grab a layer on any group and that whole group will move, but not any other layers.Even if it automatically linked all the layers in that group to all other linked layers, it would still be much easier to activate and deactivate the link on just one group each time I move that one group, rather than each individual layer.
I am using Revit 2012 and am trying to keep track of where all the groups are used in the project. Instead of clicking through all drawings to check, is there a quick way where I can find such information?
View 6 Replies View RelatedHow can I merge two separate sequences of photos into one sequence? In other words I have 10 photos in total sorted into 2 groups, I want to merge photo number 1 with photo number 5, 2 with 6 etc. Can it be done through batch or would I have to do it manually? Is there an import action that would allow me to chose the sequential photo each time?
View 1 Replies View RelatedI have a problem with my layers which I can not figure out how to solve.
see picture:
I have a group called: "Hele akvarier" " where I have used "Create new fill adjustment layer" - "Brightness / Contrast" to the layers which are under. (Layer 2, Original Copy, Original).Over is there are two layers named "Layer 3, Layer 1". These layers, I also need to use the "Brightness / Contrast" to they're going to look right, but the top "adjustment layer" affects all the layers under.
How do I get my layers divided into two groups, each with its "adjustment layer" to use each with its own settings?
How can I tween a Group of Groups to scale?
I use my Pshop groups in a similar fashion to how Flash uses Display Object Containers. I have one group containing the rest of my groups serving as a 'master group' so I can perform global transformations to all of my layers. For some reason, it stopped letting me scale.
Using frame animation (yes I'm using frame on purpose, not motion), I would like to get the master group to tween a scale and tranlate. I can get it to translate it's XY coordinates, but for some reason the scale doesn't work anymore. It was working before but not now. I even tried converting the group to a smart object but that doesn't work, and that's fine, I try to avoid smart objects where possible.
How to get this to work or what I might have done wrong to the file?
Everytime I try to duplicate groups in photoshop cs6 to another open PSD file it usually works, but lately whenever I try to do it it only gives my the option to duplicate the groups to either a brand new file (an untitled file) or to the original file (that i'm duplicating the groups from). It won't allow me to duplicate them to another open PSD file.
For example, (in case i'm not being clear), say I have 2 files open such as A.psd and B.psd but i want to duplicate a bunch of groups i created in A.psd to B.psd. When i click on the groups i want to duplicate and the option box opens- in the destination box it only gives me the option of duplicating the groups to either A.psd (which is useless) or to a new file. It doesn't give the option to duplicate the groups to B.psd. It only gives the option if it's just a layer. I either have to merge groups into one layer or make them into a smart object and use the duplicate layer option instead. It's become a annoying problem because I want my groups to just duplicate. I shouldn't have to merge them in order to send them into another file. It has always worked until now.
When I try to move layers or groups under an open layer group, it ends up inside that group instead. For example:Drag Group 3 between Group 1 and Group 2. It ends up inside Group 2, below Layer 2.Drag Group 3 between Background and Group 1. It ends up inside Group 1, below Layer 1.The only workarounds are:Close the layer group.Use Cmd-[ to move it "down" once more.
It seems to me there should be a more intuitive way to move layers, based on the indentation of the groups. Dragging a layer on a divider in the green area should move it at the top level, above background.Dragging a layer in the blue area should move it inside Group 1.Dragging a layer in the magenta area should move it inside Group 2.
Dragging a layer in the orange area should move it inside Group 3.The appropriate section of the divider should highlight to indicate where the layer will end up (currently the entire divider is highlighted)
Using LT 2014. If I select a few lines and group them, I can select that group, right click, and ungroup them. No problem.
If I group a few lines, then make another group of a few lines, then group the two groups together, then the right click menu will no longer allow me to choose ungroup. Also on the ribbon, the ungroup icon will not operate.
Before this I had LT 2011 (and before that) and I was able to group/ungroup multiple grouped objects at will. So this appears to be a glitch that was introduced since then.
How do I ungroup multiple groups?
I'm making an image which has a lot of layers, so I wondered if it is possible to group a few layers so they appear as one layer? Merging them won't work, then the layer styles vanish,
View 6 Replies View Related