Photoshop :: Two Adjustment Layers In Two Different Groups
Sep 25, 2012
I have a problem with my layers which I can not figure out how to solve.
see picture:
I have a group called: "Hele akvarier" " where I have used "Create new fill adjustment layer" - "Brightness / Contrast" to the layers which are under. (Layer 2, Original Copy, Original).Over is there are two layers named "Layer 3, Layer 1". These layers, I also need to use the "Brightness / Contrast" to they're going to look right, but the top "adjustment layer" affects all the layers under.
How do I get my layers divided into two groups, each with its "adjustment layer" to use each with its own settings?
How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
I have now exactly the same problem as below with over 1000 images, I have saved them in .psd that has over 100 layers each. On top of those there is curves and levels layer that affects every layer below. I want to save all images to .jpg for videoedit with those curves at least. I don't want to merge same curves 100 times. Is there a solution in phothoshop cs5 or cs6 available? Would save alot of working hours. All I have got by this far is blank white images of adjustment layers and non adjusted jpg-files.
This discussion was opened in 2010 and I quess this is same problem: " How to merge adjustment layers to hundreds of layers?
Jul 28, 2010 10:38 AMSay I have a photoshop File with 100 layers.
And say I created 3 adjustment layers on top of those 100 layers to get the adjustments that i want for those layers. I'm happy with the adjustments but Then I NEED to merge those 3 adjustment layers to ALL those 100 layers.
Is there a way to easily permanently apply the adjustments to each of those layers without having to do it manually? I absolutely need to merge the adjustments to the seperate layers because of how the layers are being used in a seperate 3d program.
So far what I've been doing is duplicating the adjustment layers for each layer and merging them to said layers separately.. I wish I could just right click the adjustment layer and Tell it to merge to everylayer it affects or apply to every layer underneath it!
I need to merge 2 adjustment layers with 2 image layers. When I do, the look changes. Are there ways to do this without changing the look? I have attached a screen capture of the layers affected. Additionally the "Stars" layer has a "Screen" blend mode. This is on a Mac.
Randomly on both of my computers. It happens on different versions of Photoshop, on WIN XP and WIN 7, so it's quite random. It happens everytime I want to duplicate layers, only when I duplicate them (or group) to new document. What to do about it?
I have this brand new PC, got it last week, i7 core, SSD drive, 16gb ram.When I open my PSD doc with my design (approx 43mb psd file) then the photoshop application spikes in memory usage, to 3.5gb (from 120mb), and moving groups and layers around is DEAD SLOW, horrible lag.
I had CS3 on my previous PC, which was Core2 Duo with 4gb ram, and the speeds there were similar on the same psd document.I've also tried CS5.1 on a similar PC hardware specs as my new PC, and moving groups and layers around is much faster.Is it just CS6? Why is this so slow?
I have recently ran into a few issues with Photoshop CS6. When working with Layer Groups and Blend Modes.
Here is what happens:
I am working with a document and have layers grouped into a folder. All is good when I merge that group any layers that I had with a blend mode change from that mode to Normal, thus messing up the merge. Another instance where I had this issue is if I had any hidden layers that were not displayed. If the layers were merged they would be changed from hidden to displayed. Again messing up the image and the merge. Not sure what do to here.
author one mask that effects multiple layers without using a group mask? Unfortunately I can't throw all the layers in a group and use a group mask in this case since the layers that I want to share the mask must be in different group folders. (I am using actions to export the results of each group to the different flattened files.) So I have similar but not identical layers in separate groups that I would like to share one authored mask. I also can't use smart objects because the layers are not identical.
how I can put my layers into groups now, but there are a few problems I've seen pop up.
First are foremost, when I disable the visibility on a group, if I use the move tool it will select layers from that group that were visible before the group was made invisible. Seriously, there is absolutely no reason whatsoever that I would ever want to move an individual layer that I can't see. This clearly is a glitch and needs to be fixed.
Second of all there is an issue with a layer's mode when it is in a group. For example, if a layer is set to multiply, if it is set in a group it will only multiply on layers within that group. Now this I can see a good use for, but honestly, it is not how I usually want to use layers. I'm not usually trying to separate the actual graphics in my image, I'm just trying to organize my massively long layer dialogue into something more useful. It's great to collect different aspects of my image and keep them all together. But basically every time I need a multiply layer or other effect, I need it to effect the whole image. To keep it effecting an entire image I have to make two separate groups, each above and below the layer, in order to organize my image.
Now, since there is certainly an advantage that could be given by not having such layers have any effect outside of their group, I can't argue that the feature should be removed. However, I do think it would be fantastic if a property could be added to a layer group that would allow for such layers to effect the image outside of the group or not.
The third thing I have to say about groups is linking. First of all, as it stands, when I activate linking on a layer group it has absolutely no effect, making the option redundant. However, what would be useful is if I could link an entire group to itself and then move every layer within a group in tandem.
Often times I want to move several groups of layers around so I can arrange a composition. For a simple example, maybe I have several images of characters, each built with a layer for flats, lighting, textures, etc. And to arrange the composition I want to move the whole character with all its layers to one spot, then grab another character with all of its layers to another spot.Conventionally, there are only two ways I can do this. Either I flatten each of those groups and move them as single layers, destroying my ability to alter them with any level of convenience, or I have to manually link every layer for that character, move it, un-link every layer, link all the layers in another character, and repeat.But it would be so much nicer if I could link all the layers within several groups, and move each group as a whole without moving any other layers.
Since the link option on a layer group doesn't do anything anyway, it seems reasonable to me that enabling it should have that exact effect. Using the same example, if I have each character in its own group, I activate the link option on all of those groups all at once, and then I can grab a layer on any group and that whole group will move, but not any other layers.Even if it automatically linked all the layers in that group to all other linked layers, it would still be much easier to activate and deactivate the link on just one group each time I move that one group, rather than each individual layer.
If I make an Adjustment Layer, I notice that it effects EVERY layer underneath it. Is the only way to apply that adjustment layer to layers you WANT is to drag those layers under the adjustment, and then hold ALT and click the line BETWEEN the adjustment layer and the layer you want affected, thus making it a "Clipping?" layer?
I want to insert a layer into one of my video groups. But when I do I want all of the layers in all of the selected groups to move holding therei relative position. e.g. i have a text layer positioned at a certain time in a Clip B. I want to insert another clip right before this clip which will shove Clip B to the right. I want the text layer to move also keeping its relative position to Clip B. The text clip is in a different video group from that of the underlying layer that is being shoved over.Restated, I want to hold all the clips and layers in position so that when I insert another clip everything moves holding their positions relative to each other.
i can't be the only one who thinks it's nuts that when 'auto-select > layers' is selected and i drag to select a bunch of layers, i also select layers that are turned off and/or locked, can i?i just confirmed that this IS not the case with CS6 -- locked or hidden layers are not selected upon dragging to select exposed layers.
is this a bug, or a bit of new functionality that i am failing to grasp? i did notice that in CC, on right-click there is the new option to "isolate layers", but this seems to just isolate & unclutter layers within the layers panel.
If CC is a TRIAL program, why would you allow it to blow away layers and groupings when the doc is reopened in CS6? No I have to resinstall CC, open the doc, save it back down to CS6, and PRAY that the layers and groupings are intact. What a waste of my time.
So impressed with the quick answer from my last question that I have another. In Photoshop CC (think it's the same in CS6 . .) is there a shortcut for closing the adjustment layer panel instead of having to move the cursor over and press on the cross. I used to be able to just press return in Photoshop CS3
I use adjustment layers (curves) to modify the tonal scale of my files. In CS5 I could command click on the image with the eyedropper and a corresponding point would be placed on the tone curve in the curves window. When I try this in CS 6 (command click) the curves window collapses. What should I be doing differently.
1.) I have a portrait of two persons. They are treated differently so I have them on separate layers with layer masks. So the new retouched background gets through. These layers are:
P1 and P2.
2.) The background is:
B
3.) I have some color correction adjustment layers.
a.) Some of these are just for P1:
C1
b.) Some of these iare just for P2:
C2
c.) Some of these are just for B:
CB
----------------------------
I now place my layers this way:
Group1{ C1 P1 (linked as a clipping group)} , Group2{ C2 P2 (linked as a clipping group)} , GroupB{ CB B }
That works OK.
----------------------------
Question:
I also have some color correction adjustment layers that is for both P1 and P2 but not for B.
How do I place them ?
I do not want to place them both in Group1 and in Group2.
how to make an adjustment to a specific Photoshop layer (in this case a tweaking the color on a person extracted from the background by green screen) without affecting the other layers. I have tried Adobe help but can't seem to find the solution.
Whenever i try to add adjustment layers on my gifs, the result of the adjustment only comes in effect on the first frame, even when the adjustment layer is on the very top?
In CS5 alt clicking in an adjustment layer (eg curves) permitted naming the layer and making a clipping path This does not happen in CS6.How do you do that in CS6?
Lets say I have an area of a picture to which I want to apply a adjustment layer such as Hue/Saturation. I select the area and create a mask. I then apply a Hue/Saturation adjustment layer.
The problem is that the adjustment layer affects the whole image rather than the masked area.
I'm having trouble recovering a few things that used to work really well in CS3 and before. How do I do the following in CS4?
1. Control-tab used to cycle through adjustment points in a curve and I could then use arrow keys to move adjustment points around. Control-tab does nothing in CS4 and I don't see a way to set it with keyboard shortcut settings.
2. In CS3 and earlier I could edit the settings of an adjustment layer and clicking OK would save the changes AND add a history entry. In CS4 it seems that adding the history layer is implicit. Is there a better way than selecting some other layer and going back? I can't find a keyboard shortcut that adds a history entry (e.g. hitting enter) that is equivalent to clicking OK. The "reset to previous state" button in the adjustment panel seems to hold only the previous state.
How do I make adjustment layers 1 & 2 apply to all layer below them, but have adjustment layers 3 & 4 only apply to the indented layers below them -- layers 4, 5 & 6? That is adjustment layers 3 & 4 should apply to layers 5 & 6 but, not apply to the background layer.
I'm not sure if this is an intended feature of PS, but I have relied on it heavily in the past and now I can't get it to work any more! Basically, when optimising photos, I will make an adjustment layer, levels, curves, whatever, which will globally alter the image.
I forget why I tried, but I found that using the eraser to erase parts of the adjustment layer would reveal the original state beneath, enabling me to make subtle tonal adjustments by feel. Sure there are many ways to achieve similar results with layer masks, history brush, whatever, but this method suits my way of working and is so simple. Problem is, it won't work any more - nothing to do with updating PS as I have been using CS since it came out.
Messing with layer masks has sometimes brought this feature back, sometimes not, but unfortunately only temporarily and I can't work out what I did anyway!! When it does work, you can see the erased parts in the layer thumbnail and of course in the history palette, but when it won't, you still see the erase step in the palette, but nothing happens to the image.
What is the difference between Mask layers and Adjustment layers? I work with Photoshop Elements 2.0 and really dont know what a Mask layer is or if it is exactly the same thing as Adjustment layers.
I've never had trouble erasing through adjustment layers (ie a levels or curves layer), but as of today, I am unable to erase through any adjustment layers. The history log shows I'm using the eraser tool, but nothing happens within the layer I'm trying to erase. I don't seem to have a problem erasing through duplicate background layers.
