Lets say I have an area of a picture to which I want to apply a adjustment layer such as Hue/Saturation. I select the area and create a mask. I then apply a Hue/Saturation adjustment layer.
The problem is that the adjustment layer affects the whole image rather than the masked area.
I am having an issue with clipping masks only affecting the intended layer no matter what color background I have on.
For example - I have some lettering that I want to apply a gradient map adjustment layer on. In order to only affect the type layer I hover between the adjustment layer and the type layer while holding Option + click to get the double b+w circles to clip it.
When I clip my ad layer, I don't get my effect. The only way I see the adjustment gradient effect is if I unclip my adjustment layer, but then this affects my ENTIRE background rather than just the type.
Is there a trick to keep the adjustment effect without affecting the rest of the layers no matter what color background I have? Adjustment gradients seem to work best on black backgrounds only. The problem is that my original document has a red background so I HAVE to clip it in order for the gradient not to affect my red background. But even on a black background, I have to unclip the ad layer to see the effect. This is weird.
I could flatten my document and extract my type with all its effect glory and just import it into my original doc, but selecting and extracting blurred type would be a big slap on the head.
One thing I have never understood is: why use layer masks and adjustment layers, instead of simply creating a copy of the subject layer (the one I want to make changes to) and experimenting with that? It's quick (Ctrl-J), I can do it as many times as I want, I'm not affecting my Background layer. If I like the changes, I can keep them. I can switch the copy on and off to compare with the Background layer. I can do any type of blend or combination I desire. I can insert Gradient layer(s), select any part of the copy and (Ctrl-J) create a new layer containing only the selected part. I can adjust size, rotate, do anything.
It almost seems that "layer mask" and "adjustment layer" are mainly another layer of terminology; how they are intrinsically different from or superior to working with copies of the Background layer?
this worked until yesterday. I didn't install any software on the pc or change any settings that I can think of. I'm using photoshop cs2. I've rebooted the computer several times and I've quit/restarted photoshop several times.
when I create an adjustment layer, I cannot paint black in the mask area. I can fill with black and paint white. if, after filling black and painting white, I press D (to swap foreground/background colors), I can paint, a paintbrush thing shows up in the history, but it won't change. if I press D again, and paint some more white, it shows up in white. likewise, if I choose black another way (eyedropper, setting rgb to 0,0,0), it behaves the same. likewise, if I don't start out by filling black, and I just try to paint black on the white mask, it behaves the same (doesn't work).
if I create a new layer, I can paint black on it. If I switch to the pencil tool rather than the brush tool, I can pencil black into my adjustment layer masks.
any suggestions?
or what info can I get for you so you have a good place to start?
In PS CS5 when Adjustments panel is selected un the Windows dropdown menu next to the adjustments panel tab there is a Masks tab. This is not the case with PS CS6 Beta. Why is this the case? Has Adobe excluded the Masks tab? I could not find the Masks tab under the Windows drop down menu?
View 1 Replies View RelatedWhen I try and apply a channel to an adjustment of my choosing, I get a red mask across the whole image and the alteration is global as opposed to the selection of the mask if that makes any sense? [URL] ........
View 7 Replies View RelatedI am trying to re-edit some of my birding photos (CR2 raw images). I have difficult masks that were created in LR3 and took alot of time due to feathers on a complicated background. I do not want to have to re-mask everything in LR4. When I have imported my files to LR4 the original LR3 mask is still present. However, the sliders for Temp, Tint, Hightlights, Shadows, Saturation, Noise, Moire and Defringe are missing. I want to do localized noise control to keep feather sharpness so I need the Noise slider.
If I work on a photo that had no LR3 mask all sliders are available. If a mask from LR3 exists I am missing sliders. URL...
How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
View 6 Replies View RelatedHow do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
I have now exactly the same problem as below with over 1000 images, I have saved them in .psd that has over 100 layers each. On top of those there is curves and levels layer that affects every layer below. I want to save all images to .jpg for videoedit with those curves at least. I don't want to merge same curves 100 times. Is there a solution in phothoshop cs5 or cs6 available? Would save alot of working hours. All I have got by this far is blank white images of adjustment layers and non adjusted jpg-files.
This discussion was opened in 2010 and I quess this is same problem:
"
How to merge adjustment layers to hundreds of layers?
Jul 28, 2010 10:38 AMSay I have a photoshop File with 100 layers.
And say I created 3 adjustment layers on top of those 100 layers to get the adjustments that i want for those layers. I'm happy with the adjustments but Then I NEED to merge those 3 adjustment layers to ALL those 100 layers.
Is there a way to easily permanently apply the adjustments to each of those layers without having to do it manually? I absolutely need to merge the adjustments to the seperate layers because of how the layers are being used in a seperate 3d program.
So far what I've been doing is duplicating the adjustment layers for each layer and merging them to said layers separately.. I wish I could just right click the adjustment layer and Tell it to merge to everylayer it affects or apply to every layer underneath it!
How can i erase part of an image gradually? i want to achieve sort of a fading effect...
View 2 Replies View RelatedI need to merge 2 adjustment layers with 2 image layers. When I do, the look changes. Are there ways to do this without changing the look? I have attached a screen capture of the layers affected. Additionally the "Stars" layer has a "Screen" blend mode. This is on a Mac.
View 2 Replies View Relatedi had a layer with text on it that was pretty transparent. if I cmd + click the layer i usually get a selection around the text, but somehow because of the transparency it selected very little of it, even though I can clearly see the letters very well.
then i tried adding a clipping mask above the transparent letter with a bit of color and the clipped layer would not eve show up. I had to unclip to see it.
I am having trouble aligning two layers that have layer masks on them. At the moment, the Align Left Edge tool is aligning the layers based off the entire contents of the layer, and not the mask, resulting in the layers not appearing aligned at all. Is there something I can do to tell the Align tool to take the masks into account?
I am using CS6.
So I have been trying to learn to be as non destructive as possible..one problem I've recently had is that when I try to merge layers, I will lose the mask that was on one of the layers.
View 10 Replies View RelatedIf I make an Adjustment Layer, I notice that it effects EVERY layer underneath it. Is the only way to apply that adjustment layer to layers you WANT is to drag those layers under the adjustment, and then hold ALT and click the line BETWEEN the adjustment layer and the layer you want affected, thus making it a "Clipping?" layer?
View 7 Replies View RelatedSo impressed with the quick answer from my last question that I have another. In Photoshop CC (think it's the same in CS6 . .) is there a shortcut for closing the adjustment layer panel instead of having to move the cursor over and press on the cross. I used to be able to just press return in Photoshop CS3
View 2 Replies View RelatedI use adjustment layers (curves) to modify the tonal scale of my files. In CS5 I could command click on the image with the eyedropper and a corresponding point would be placed on the tone curve in the curves window. When I try this in CS 6 (command click) the curves window collapses. What should I be doing differently.
View 2 Replies View RelatedI was wondering how you can make an adjustment layer in CS2 only affect the one layer beneath it, not every layer.
View 8 Replies View Related1.)
I have a portrait of two persons. They are treated differently
so I have them on separate layers with layer masks.
So the new retouched background gets through.
These layers are:
P1 and P2.
2.)
The background is:
B
3.)
I have some color correction adjustment layers.
a.)
Some of these are just for P1:
C1
b.)
Some of these iare just for P2:
C2
c.)
Some of these are just for B:
CB
----------------------------
I now place my layers this way:
Group1{ C1 P1 (linked as a clipping group)} ,
Group2{ C2 P2 (linked as a clipping group)} ,
GroupB{ CB B }
That works OK.
----------------------------
Question:
I also have some color correction adjustment layers
that is for both P1 and P2 but not for B.
How do I place them ?
I do not want to place them both in Group1 and in Group2.
I Want to have them in just one place.
how to make an adjustment to a specific Photoshop layer (in this case a tweaking the color on a person extracted from the background by green screen) without affecting the other layers. I have tried Adobe help but can't seem to find the solution.
I am using Photoshop CS4.
Whenever i try to add adjustment layers on my gifs, the result of the adjustment only comes in effect on the first frame, even when the adjustment layer is on the very top?
View 3 Replies View RelatedIn CS5 alt clicking in an adjustment layer (eg curves) permitted naming the layer and making a clipping path This does not happen in CS6.How do you do that in CS6?
View 4 Replies View RelatedI have a problem with my layers which I can not figure out how to solve.
see picture:
I have a group called: "Hele akvarier" " where I have used "Create new fill adjustment layer" - "Brightness / Contrast" to the layers which are under. (Layer 2, Original Copy, Original).Over is there are two layers named "Layer 3, Layer 1". These layers, I also need to use the "Brightness / Contrast" to they're going to look right, but the top "adjustment layer" affects all the layers under.
How do I get my layers divided into two groups, each with its "adjustment layer" to use each with its own settings?
Suddenly, the adjustment layers I am trying to use have no effect. Moving the sliders has no effect.
View 2 Replies View RelatedWhat method do you guys use in applying an Adjustment layer to MULTIPLE Layers but NOT everything underneath it?
I tried using clipping masks, but I think my solution isn't "the best way".
I'm having trouble recovering a few things that used to work really well in CS3 and before. How do I do the following in CS4?
1. Control-tab used to cycle through adjustment points in a curve and I could then use arrow keys to move adjustment points around. Control-tab does nothing in CS4 and I don't see a way to set it with keyboard shortcut settings.
2. In CS3 and earlier I could edit the settings of an adjustment layer and clicking OK would save the changes AND add a history entry. In CS4 it seems that adding the history layer is implicit. Is there a better way than selecting some other layer and going back? I can't find a keyboard shortcut that adds a history entry (e.g. hitting enter) that is equivalent to clicking OK. The "reset to previous state" button in the adjustment panel seems to hold only the previous state.
How do I make adjustment layers 1 & 2 apply to all layer below them,
but have adjustment layers 3 & 4 only apply to the indented layers
below them -- layers 4, 5 & 6? That is adjustment layers 3 & 4 should
apply to layers 5 & 6 but, not apply to the background layer.
I'm not sure if this is an intended feature of PS, but I have relied on it heavily in the past and now I can't get it to work any more!
Basically, when optimising photos, I will make an adjustment layer, levels, curves, whatever, which will globally alter the image.
I forget why I tried, but I found that using the eraser to erase parts of the adjustment layer would reveal the original state beneath, enabling me to make subtle tonal adjustments by feel. Sure there are many ways to achieve similar results with layer masks, history brush, whatever, but this method suits my way of working and is so simple.
Problem is, it won't work any more - nothing to do with updating PS as I have been using CS since it came out.
Messing with layer masks has sometimes brought this feature back, sometimes not, but unfortunately only temporarily and I can't work out what I did anyway!! When it does work, you can see the erased parts in the layer thumbnail and of course in the history palette, but when it won't, you still see the erase step in the palette, but nothing happens to the image.
What is the difference between Mask layers and Adjustment layers? I work with Photoshop Elements 2.0 and really dont know what a Mask layer is or if it is exactly the same thing as Adjustment layers.
View 9 Replies View Related