So I was wondering if there is a way to have a different group for a set of fonts. URL....In that screenshot you have different groups of brushes you can easily click, am I able to do something like this for fonts?
View 3 RepliesI am running Illustrator CS5 on a Laptop PC. I am constantly installing new fonts to work on customer projects...
I have noticed that sometimes the fonts appear in the font list in alphabetical order, and sometimes they appear either towards the top or bottom (not in order), or they are in a completely separate grouping at the bottom of the list. Is there any fix for this? I'd prefer that they all be in Alphabetical order if possible...
I just discovered survey figure groups and am playing around with them. Great way to bring certain figures in & out. What seems crazy is that I have to check them on/off one at a time. Am I missing something or is this the only way to add figures to a figure group?
View 2 Replies View RelatedI just learned (after 16 years...) that it's been possible to drill down through successive compound objects within groups without using the new V7 feature "Edit inside".
I'd always used Ctrl+Click within a group to select the object in it I want, but could never select just a group that was within--only a single object. But apparently Ctrl+Click is only intended to select the bottom-most (leaf) object of the group (tree). If instead you use Ctrl+Alt+Click, you can click through each level of a group.
So for example if you made two groups of 3 objects and then grouped the two groups together, you can select the whole group first, then one of the other groups within, then one of the objects within that group.
I can't believe I didn't know this. Shows what I know. And what amazes me more is that I didn't figure it out given that you can Alt+Click to select through overlapping objects.
I want to see "resent" fonts when choosing, be able to type letter to get down the list quickly, group similar fonts, etc. Maybe have a magnifying glass attached to cursor to see fonts better.... Why have this not been done?
View 1 Replies View RelatedOnce I installed windows 7, while I WAS using PSE 9, I had the tiny font problem. I stopped using PSE for 2 years. I just installed PSE 11. Though better, the Font is still way smaller than I would like. Maybe it's just tougher for seniors? Can they not make the font adjustable? I was told there is no way to increase the size of the font?
View 4 Replies View RelatedIt used to be that I very rarely used fonts within CS5 but recently I have. I realized that all of the fonts supposedly included with CS5 are not available via my drop down menu.
I then found these fonts in Windows/fonts so I copied all of those fonts into Program Files/Common Files/Adobe/Fonts. These unavailble fonts are now listed in that folder but are still not available via the dropdown menu in PS CS5.
I've recently read that the fonts don't really even NEED to be in the Program Files/Common Files/Adobe/Fonts folder and that PS should actually make all of the fonts in Windows/Fonts available via the dropdown menu. Yes, I have restarted PS after copying the files and also tried rebooting my PC after copying the files. The fonts are still not available via the drop down text menu within PS even though all of them are now in both locations.
I have put some new fonts into C:/windows/fonts and they have come up in other programs e.g. Microsoft office but they are not showing up in photoshop.
i am using vista home premium with SP1 and it is 32bit and photoshop cs4.
fonts withs parts of letter missing in a few fonts when sent to cut/plot
View 10 Replies View Relatednever knew there has a font folder in the user profile for Gimp until I wiped my user profile and moved all patterns, gradients, brushes, etc I have been putting in the program folder to the user profile folder because I read on here that it is better to keep all that stuff in the user profile folder of Gimp... my question is, what is the difference between installing your fonts into the system and placing them into the fonts folder in Gimp (besides all programs being able to use them)?? I've been installing all my fonts into the system I wanna use in Gimp... is it better to use the font folder in the Gimp user profile or to install them into the system?
View 1 Replies View Relatedwill not allow me to attach screen shot from grab. Image not allowed is error message
View 3 Replies View Relatedhow to get Gimp to only showfonts from the user/fonts file rather than the vast amount of system fonts.
I think you should read the original mail again. Hint: "system fonts not shown" is not the problem, but the desired outcome.I have accidentally read a "not" into the original mail, thus it became "to get Gimp to *not* only show fonts from the user/fonts file"
The configuration to check is the fonconfig settings then, for example the the global, system-wide fonts.conf file. It may contain references to the global font directories, for example /usr/share/fonts/usr/X11R6/lib/X11/fonts. URL....
If you comment those out, then you can (and have to) add all font directories in GIMP's settings, for example.
How do I include 'Edge Web Fonts' (not Google Web Fonts) into Edge Animate?
View 18 Replies View RelatedHow can I merge two separate sequences of photos into one sequence? In other words I have 10 photos in total sorted into 2 groups, I want to merge photo number 1 with photo number 5, 2 with 6 etc. Can it be done through batch or would I have to do it manually? Is there an import action that would allow me to chose the sequential photo each time?
View 1 Replies View RelatedI have a problem with my layers which I can not figure out how to solve.
see picture:
I have a group called: "Hele akvarier" " where I have used "Create new fill adjustment layer" - "Brightness / Contrast" to the layers which are under. (Layer 2, Original Copy, Original).Over is there are two layers named "Layer 3, Layer 1". These layers, I also need to use the "Brightness / Contrast" to they're going to look right, but the top "adjustment layer" affects all the layers under.
How do I get my layers divided into two groups, each with its "adjustment layer" to use each with its own settings?
How can I tween a Group of Groups to scale?
I use my Pshop groups in a similar fashion to how Flash uses Display Object Containers. I have one group containing the rest of my groups serving as a 'master group' so I can perform global transformations to all of my layers. For some reason, it stopped letting me scale.
Using frame animation (yes I'm using frame on purpose, not motion), I would like to get the master group to tween a scale and tranlate. I can get it to translate it's XY coordinates, but for some reason the scale doesn't work anymore. It was working before but not now. I even tried converting the group to a smart object but that doesn't work, and that's fine, I try to avoid smart objects where possible.
How to get this to work or what I might have done wrong to the file?
Everytime I try to duplicate groups in photoshop cs6 to another open PSD file it usually works, but lately whenever I try to do it it only gives my the option to duplicate the groups to either a brand new file (an untitled file) or to the original file (that i'm duplicating the groups from). It won't allow me to duplicate them to another open PSD file.
For example, (in case i'm not being clear), say I have 2 files open such as A.psd and B.psd but i want to duplicate a bunch of groups i created in A.psd to B.psd. When i click on the groups i want to duplicate and the option box opens- in the destination box it only gives me the option of duplicating the groups to either A.psd (which is useless) or to a new file. It doesn't give the option to duplicate the groups to B.psd. It only gives the option if it's just a layer. I either have to merge groups into one layer or make them into a smart object and use the duplicate layer option instead. It's become a annoying problem because I want my groups to just duplicate. I shouldn't have to merge them in order to send them into another file. It has always worked until now.
When I try to move layers or groups under an open layer group, it ends up inside that group instead. For example:Drag Group 3 between Group 1 and Group 2. It ends up inside Group 2, below Layer 2.Drag Group 3 between Background and Group 1. It ends up inside Group 1, below Layer 1.The only workarounds are:Close the layer group.Use Cmd-[ to move it "down" once more.
It seems to me there should be a more intuitive way to move layers, based on the indentation of the groups. Dragging a layer on a divider in the green area should move it at the top level, above background.Dragging a layer in the blue area should move it inside Group 1.Dragging a layer in the magenta area should move it inside Group 2.
Dragging a layer in the orange area should move it inside Group 3.The appropriate section of the divider should highlight to indicate where the layer will end up (currently the entire divider is highlighted)
I'm making an image which has a lot of layers, so I wondered if it is possible to group a few layers so they appear as one layer? Merging them won't work, then the layer styles vanish,
View 6 Replies View RelatedI have a bunch of group folders and I know there is a way to close all the group folders.
View 2 Replies View RelatedI need to do to add some people to a group shot. I used the lasso and got the part of the first person I want to use, free transformed it to the size I need, but i can't seem to add him to the back row. I know I'm forgetting something simple, but I'm just blank.
View 1 Replies View RelatedHave tried at least three different key combos using workspace, keyboard shortcuts.Have set them up successfully but they don't seem to want to close tab groups.I have set up other special keyboard shortcuts (like flatten image) which work great
View 4 Replies View RelatedI'm not talking about simply making a layer folder with various elements grouped inside. What I'm trying to do is create different screen instances of a website using a feaure that turns on specific layers, allowing me to save that "layer visible" combination. I did this a few years ago and now cannot remember how it was done. To give an example:
I have a layer folder called "main navigation" in my Photoshop file. This main navigation folder has tons of sublayer elements that include the menu itself, hover states, drop down states, etc. I have another layer folder that contains elements for a specific web page.
What I used to do was this: I could turn on one of the specific web page folders, then turn on the active state element in my Main Navigation folder. So now the page looks as if it would for that specific screen instance. At this point, I was able to create a "Layer Group" that saved this specific set of layers that were turned on (visible), and name it.
Does this feature still exist in Photoshop? I can't seem to find it anywhere, or find any documentation on how to implement it.
Is this possible with some keyboard shortcut? Seems like that should be possible...
View 2 Replies View RelatedHas created a 10 layer groups in Photoshop (there are multiple layers in the group layer.)
10 Photoshop layer groups
I try to save the JPG file to 10. How can I batch or automatically save?
How can color correction be applied to a GROUP of layers?
View 3 Replies View RelatedI resized it to fit the background notepad and made several identical copies of the texture layer, their only difference being different values for "blend if underlying layer", so that the texture smoothly ends with the underlying notepad on each side (as there are luminosity differences both on the notepad and the notepads background).
That looks fine for "normal blending" (dont worry about the messy bottom, it will be cropped when everythings done). But I actually need the texture to be multiplied with the background layer. Obviously setting each layer to multiply isnt going to cut it because they would multiply each other, too. So I need to either put all the layers into a smart object (option 1) or option 2, which Ill resort to here put all layers into a group set to multiply, since this way all of the layers in the group are put together first and the composite group is then treated as a single image and blended with the rest of the image, using multiply.
... whereas I rather expected the result to look like this (I only roughly masked the edges for demonstration purposes):
To me it seems, as if putting the group would nullify the "blend if underlying layer" settings for each layer. Besides, the same happens if I use a smart object instead of the group (option 1). I dont see why this should happen at all.
So my questions: Is this behaviour deliberate? And if so, can somebody explain ?
a solution to get to the last screenshot (without masking manually obviously) ?
I have a image that has many layers that are grouped by folders and I've just exported it to .psd and after opening the exported file to check it, I see that the Group Layers cannot be opened. I've also tested this in an on-line Photoshop program (I can't install the actual Photoshop in my computer).
Adobe Photoshop CS be able to open the Group Layers and edit them?
How can I unstack an entire group of images all at once. It's a real pain to do it one at a time especially if you have hundreds. I have some stacked and some unstacked images in a group. If I 'select all' I can't unstack the stacked ones. If I select more than one stacked image I can't unstack both at the same time.
View 5 Replies View RelatedLooks that I have similar problem with my PSE11. I just can't open a group in imported files. The screens shows that : [URL]
I'm working on laptop with WIN8 64 bit, and I tried to delete prefrences with no success.
By the way, I downloaded the trial of the regular Photoshop CC and everything is just fine!
As I am using Layer Comps more frequently, i find myself frequently needing to toggle the visibility of layer groups, which contain several sub-groups. I tried all the shift + cmd + option - click variations, but none seems to do the trick.
here an example:
Visibility Type Name
OFF Group Row
ON Group Button 1
OFF Text Help!
OFF Shape Bg
ON Group Button 2
OFF Text Help Please!
OFF Shape Bg
so what i am looking for is a short-cut so that when i click on the visibility of the Group Row, it will turn on the visibility of all the layers contained.