Illustrator :: Creating Multiple Gradients On The Same Object?
Mar 14, 2013
I am trying to apply multiple gradients to a leaf, or to any other object for that matter. Along the protruding edges I would like to apply a short gradient that points inward. I would like to repeat this gradient to every protruded edge, but each gradient would have to be manipulated independently. I have tried to do this using the Appearance Panel, by duplicating the fill. This works just fine but because the gradients are on different layers I can only see one gradient at a time, no way to see them all together.
The pic below is just an example, the colors/design are irrelevent.
When I try to move the gradient itself it seems to always jump back to where I picked it up, I can't place it exactly where I would like. As well, how can I control the wide of the gradient? As you can see in the pic, the protruding edges are quite narrow so the gradient should cover just that portion of the leaf.
View 3 Replies
ADVERTISEMENT
Jun 1, 2013
I've found this tutorial on adding multiple gradients to form a glassy text [URL]....and I never knew you could create multiple gradients on one object.
I can only manage to apply one gradient. On the tutorial it sounds easy to just draw a gradient, then draw another. However it is not that simple; I draw a gradient, then I attempt to draw the second, and it just moves the first gradient.
How does one draw multiple gradients on the same object?
View 7 Replies
View Related
Aug 28, 2012
Just as it states, how do I add 2, 3, even four gradients to one object. Each gradient will have some level of transparency to it.
I need it to work similiar to: masking a layer in photoshop, and then using gradients to "chip away" pieces of the layer. I suppose I could just use opacity mask in AI, but I didnt think of that until now. Anywho now I'm curious, can you do this with multiple gradients in AI?
I tried doing the basic "add fill" option then setting my gradients, but it doesnt preserve the transparency correctly.
View 16 Replies
View Related
Nov 30, 2013
I've been trying to make consistent gradients for a while now with no success. What I would like to do is make one gradient - say a dark red to light red - and then have a way to change the colors of that gradient without having to search for the correct hex colors for each one. So say I do the red gradient, then if there was some way to overlay something over it to change the colors instead of trying to find them myself.
I know you can do this in Photoshop, but I haven't figured out how to do it in AI. Perhaps there's an easier way I just haven't found yet. I've spent a long time trying to make gradients of different shades (reds, blues, etc.), but the problem is getting each color of the gradient to be about equal to the other ones.
View 5 Replies
View Related
Sep 28, 2013
I click the gradients panel and then the dropdown of gradients on the left side.
All I see is: White Black, Gold Dust, and Blue Sky.
I know AI has a ton more gradients premade than that so why aren't they in the list? How do I add more to that dropdown?
View 2 Replies
View Related
Jan 25, 2014
I'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?
View 3 Replies
View Related
May 20, 2011
I'm making userbars, and I'm using the trick to have multiple gradients in multiple layers. (I don't really think I'm doing it right though, first I make the whole first layer a certain colour, then go from the left with the next colour with the second colour transparent?) And for those layers, I'm trying to add the cloud effect (something to make it look nicer, I hate how lame/2d it looks without any effects) to all the layers with them blending into each other, but I eventually see one of the clouds effects under another effect/colour and it's just a big mess- I can see every colour mashed together. When I use the rectangle tool to select where the cloud effect goes, or the eraser to erase what I don't want, it looks kinda square like, and it doesn't blend with the other colour. ;-;
I have the plugins all downloaded btw.
View 7 Replies
View Related
Mar 9, 2009
what I'd like to do is to select the edge of a picture, and then extend the colors that are present in gradient fashion, based on the colors of the pixels at the edge.
For instance, here's a picture of the grand canyon:
How would I extend the left side with gradients that would match the colors of the pixels on the left edge, and all gradiate to black? (I'd blur or something later so that the transition from the picture to the gradient start appeared smoother)
View 1 Replies
View Related
Nov 2, 2013
Is there an easy way to create bleeds and trim marks for multiple objects on the same page?
For instance, I have a playing card that I've tiled across the page 6 times ( so that I can create 6 cards out of 1 page ). Each card needs it's own bleed/trim marks.
I'd also like to have printer registration marks for the page, as I have to print the card backings on another page and then glue the two pages together.
The only way I've found that I can do this is to manually create the trim marks for each object's bleed and just have them all within 1 artboard.
I tried doing it with multiple artboards within one larger artboard, but couldn't get that to work.
Is this something that just needs to be manually done?
View 8 Replies
View Related
May 8, 2013
If I already have an object selected and then click the "new layer" icon in the layers palette, the object I have selected deselects as soon as the new layer is created. Why is this? Also, it only happens on one of my computers, so I figured it was a setting that I'm missing but I certainly can't find it.
View 2 Replies
View Related
Sep 18, 2013
I'm working on an illustration of headphones and I need to make it look as thought the wire coming out of the headphones is sitting on a table and the light source is above and casting the shadow slightly to the left.I did the below test but it looks more like you are looking at the wire from an x/y axis.
View 2 Replies
View Related
Aug 20, 2013
I was trying to create a clipping mask from an object that is made from two shapes, and one has appearances but I had to resort to expand appearance, then use the object as a clipping mask.
Is there really no way to keep the dynamic appearances and use a layer as a clipping mask?
View 9 Replies
View Related
Apr 24, 2013
I want to create a dialog consisting of multiple buttons. As a result I want value which button was pressed by user.
The script (shortened to problematic part):
// I'm looping through elements on layer 'warstwa' from kolorStart to kolorStop, 'k' is used for number buttons
for (i = kolorStart, k = 0; i <= kolorStop; k++, i++) {
myButton[k] = myButtonGroup.add ("button", undefined, warstwa.pageItems[i].contents);
myButton[k].label = warstwa.pageItems[i].contents;
myButton[k].onClick = function () { wybranyKolor = myButton[k].label; myWindow.close(); }
}
The result:
But buttons don't work, wybranyKolor returning 'undefined'. If I change "wybranyKolor = myButton[k].label" to "wybranyKolor = myButton[k-1].label" I get proper answer but it is the same for all buttons so it looks that all buttons have the same action assigned. How to get each button to has unique name which can be passed to variable?
Probably I can achieve the same with radio buttons' list but with buttons it is one click less for the user.
View 7 Replies
View Related
Mar 19, 2013
I was editing a file in illustrator that a past designer set up and he set it up so that there are multiple lines in a column of text that are linked some how so that the first line of text can be edited and the rest will change with it.
View 2 Replies
View Related
Jun 2, 2013
I'm looking for a way to draw a single, solid object and then divide that object into multiple objects using the pen tool; not other objects.
Ex: Draw a solid cirlce, use the pen tool to draw lines over said circle (visually creating different shapes), then [do something] with both the original circle and the pen-drawn lines to actually create the new shapes/objects.
I've done this before by placing other OBJECTS over the original object and then using the divide or trim pathfinder toggles, but using other shapes (even the line tool) has its limitations.
View 4 Replies
View Related
Jun 27, 2012
I have a logo for an organization I volunteer for that I guess was originally made in such a way that it consists of a large number of "slices" on top of each other. I don't mean slices in the same meaning as the tool in Illustrator, but rather separate, horizontal objects on top of one another that together form the logo. They are not overlapping but have common anchor points.
Here is a crop of the logo file: [URL]....
How do I merge these slices into one object? I'd like to clean up the logo and the paths are quite hard to modify as it is
View 3 Replies
View Related
Mar 19, 2014
I'm trying to create a distressed look on an object that has a gradient mesh appliet to it. i've done this with regular objects but never on one with a gradient mesh. one of the steps in this process is to expand the object, but i'm not able to do so because the expand option is grayed out in the drop down menu.
normally after expanding the object i would use one of the artistic charcoal brushes to create a texture over the object in a different color. then i would select the brush strokes and expand apperance. then, using the pathfinder, i would merge the expanded brush strokes with the expanded object and then delete the brush stokes. what remains is the object with little cut-outs where the texture of the brush strokes used to be.
however i can't do this because i can't expand the object with a gradient mesh.
View 1 Replies
View Related
Apr 26, 2013
.... so as to be able to apply a fill over the whole object??
This might sound more obvious than it actually is in this case so i'll explain. My partners artwork contains a lot of linework and unfortunately, i can't get the degree of accuracy i need with a continous path. Therefore, the problem i have is joining lots of paths (some of which have endpoints joining midway through other paths) to make a single object with the strokes preserved, so i can apply a fill to the overall object or to individual sections.
I've tried unite, join and all the other commands that i'm aware of but all give undesired effects. I've tried using a compund path but all that does is make them act as one but still doesn't do what i need with regards to filling the object.
A simplified example of what i need to achieve is this...... create a square using 4 seperate paths and then a cross through the middle using more seperate paths to create a 4 box square. I need to be able to make this one object so i can fill each individual square a different colour if need be?
View 3 Replies
View Related
Jul 21, 2013
When I click and drag with the direct selection tool, I'm getting a drag on the object rather than a marque for selecting points. As soon as I click, the tool switches to the black arrow tool. Did I mess up a setting somewhere? I'm not using any modifier keys.
View 2 Replies
View Related
Nov 27, 2012
Is there a way to create an object/group in Illustrator and then copy it across one document in multiple places (multiple art boards, etc.) - allowing the designer to then update the original and seeing the changes cascade to all copies?
I know this can be done using InDesign by linking an Illustrator file and making subsequent updates to that Illustrator file. But I do not want to use InDesign, I want to use Illustrator. What I want is much like creating Symbols in Flash, updating one will cascade throughout the file.
View 6 Replies
View Related
Aug 25, 2012
1. original
2. doubled horizontal size of the line
I'm using scatter brush to draw multiple lines with random size and angle(image 1.), and trying to increase only the horizontal size(image 2.), keeping the interval the same. But when I do, the interval is also increased since 'Spacing' option follows the size of the base object. I could adjust and decrease the spacing value, but the problem is, spacing option cannot go below 1%. So if want to increase the line size and maintain the interval, there's no way to do it. expending then scaling could work, but that's not what I want.
View 4 Replies
View Related
Nov 30, 2012
[URL]....to look like this USA flag. [URL] ....NO photoshop. [URL] ....
What i had to do is make each "gradient section" a different "shape", and make it exactly the right angle to contour with the flag.
I can do up and down gradients fine (even though it takes forever)how to do is the gradients that dont go up and down all the way.I could do this in about 3 seconds in photoshop, but I'm just about ready to give up in illustrator..
View 4 Replies
View Related
Jul 30, 2010
I have been continuously since buying CS5/Illustrator. Our company had its logo designed by another firm, and it has been my job to use it in brochures and marketing collateral. The logo uses a two instances of a radial gradient applied to two separate elements of the logo. The gradients are off-center. However, when I place the file into a document, save, close and re-open, boom! the gradient is reset to center, throwing off the logo. This has happened when I have least expected it, and even resulted in a very expensive reprint.
I have converted the file to different formats: EPS, JPEG and PDF, but with the first, there is a loss of image quality, and with PDF, the gradient still moves out of place.
View 17 Replies
View Related
Nov 15, 2013
I'm currently working on some icons for our new agency website... When try to export files with gradients, which assigned to nicely named graphic styles, illustrator keeps exporting a strange st-class for every new gradient i'm generating and refuses to assign my class, like:
<style type="text/css">
.testStyle{fill:url(#SVGID_1_);} //my class with a useless gradient
.st0{fill:url(#testrect_1_);} // class generated by illustrator
</style>
<linearGradient id="SVGID_1_" gradientUnits="userSpaceOnUse" x1="0" y1="0" x2="1" y2="0"> // useless gradient with no height?!
<stop offset="0" style="stop-color:#FFFFFF"/>
<stop offset="1" style="stop-color:#000000"/>
[code]....
When i change the code by myself, it works properly. But it's actually no option to change every svg by hand...
View 3 Replies
View Related
Nov 17, 2012
I frequently find myself recreating gradients created in illustrator using Photoshop. however, even when using the exact settings for color, opacity, and location, they never come out the same. is there some rule of thumb or some logic as to how those two applications create gradients and how to better approximate them?
View 5 Replies
View Related
Jan 9, 2004
the darker part of the ear where the black line starts and ends .. i want to make gradient............ is that possible .. or is there a technique to create that effect?
View 2 Replies
View Related
Jul 2, 2012
Is there a setting or preference that I can change so that my gradients with transparency set in them do not change to opacity masks after saving and closing?
View 2 Replies
View Related
Dec 30, 2013
I am new to Illustrator and am trying to create a 3D dish that looks silver on one side and gold on the other. Is there a way I can do this? If I want to add further shapes to the top of this dish is it better to add these before applying the 3D effect? If so is it possible to apply the gradients to only part of the shape?
Alternatively would it be possible to use the gradient mesh in concave shape. The default mesh is convex. Is there an easy way to change this to concave?
View 14 Replies
View Related
Aug 18, 2013
I'm trying to create several different colored orbs that will have a consistent look using gradients. I've been playing around with Kuler and some other apps trying to pick the right shades for each orb to get a nice smooth transition, but I'm having a tough time picking the right colors for each of the gradient stops.
View 15 Replies
View Related
Sep 8, 2011
I tried to import from Adobe Ilustrator CS3 to Corel Draw X5 and certain gradients, probably the most complex ones, get pixelated. Is there a solution to this? I tried exporting in Illustrator to every possible format and then importing to Corel but nothing solved my problem.
View 14 Replies
View Related
Jul 3, 2012
I was wondering with cs6 whether it would finally be possible to assign gradients on stroke by pen pressure so you can do stuff like darken lines by pressure just like a real pencil for example.
View 4 Replies
View Related
