I'm new to Adobe Illustrator (CS5) and, as the topic says, have an very basic question: how to hide a shape behind another shape? (say a star shape behind a rectangle)
I've looked up on tutorials and such and from what I've seen, the layers order containing each of the objects decides how the occlusion should occur, however I've tried doing that but with no luck, am I missing something here?
i created three circles which overlap at certain points, and each of the spaces is filled in with a different color. i need to hide the thin, black outline of the circles. i have made sure that there is no stroke, but it's still there.
View 10 Replies View RelatedI'm using CS3 on a Mac.
I outlined my text and subtracted it (and the tree image) from the black background. When I did this both appear thinner - particularly the tree.
If I then take the original version and the new subtracted version, and view them both overlayed one on top of the other in wire frame (outline) mode, there is no difference in the actual lines.
It seems to be a problem with the way illustrator previews the images. This wouldn't concern me, but when I export the file as a jpeg, the lines also appear thinner in the export.
I can create a manual solution by offsetting the path before subtracting, but this isn't ideal.
What does it mean when Illustrator v.15.1.0 ceases to contract a shape using offset paths and will only expand a shape? Seems like only yesterday I could render both ways. Wait a minute, it was only yesterday! Why would it suddenly stop funtioning?
View 3 Replies View RelatedI have two layers on the bottom I have text, and on the top I have a shape.
How do I make the shape transparent so the shape may be filled with the background color?
I'm trying to repurpose some artwork and am running into an issue. In the image below, I simply want to delete the bottom right corner of the blue box so that the orange background is visible along the right edge of the curved shape and the blue box is visible along the left edge of the curved shape. But I cannot figure out how to do this. I've tried all the Pathfinder choices and none work. How can I do this? CS6, Windows 7.
View 12 Replies View RelatedI'm trying to cover a section of letters that have been outlines with a red box over a serif for a homework project. HOWEVER. Everytime I do this, it looks like I have it all lined up and when I make another point, the points move on its own to be off and not cover the object Say I complete the box and try to cover the object by just dragging and dropping, it will avoid that area and move it off to one side or the other but never align with the actual object I'm trying to cover for a smooth and even coverage. Trying to get the red box to cover the black serif and it won't do it.
View 6 Replies View RelatedIn PS i can Magic wand selection shape from one layer, drop to sub layer and copy that selected shape from that sub layer. How do I do this in illistrator, and moreover, from multiple layer at the same time.
For instance, in PS = Import an image of gold - select a text phrse with wand - drop to gold - copy paste = gold text.
In Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
This works correctly in CS4, but not in CS6 (don't know about CS5).
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
I want to make a vector shape from a path. Is there a way to bypass having to define a new custom shape? I just want to quickly add the vector shape to a new layer, but I don't need it defined as it'll just be used once.
View 5 Replies View RelatedShape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
I just read the thread the thread "...plus ask about erasers" but it doesn't answer my question about combining shapes to remove unwanted portions - or at least I didn't quite understand it. Here's my issue. I've created a nice "background" image with ripples and live effects, but it has gaps, and isn'tthe right shape. I need to erase parts of it and clip it to the right shape, but every time I try to do this using the slice tool, it puts the gaps back into the image! Attached is my image and the shape I want to clip it to.
I just tried converting the ripple shape to a bitmap copy and then slicing the shape - that doesn't get me the rippled effect I want - just the shape I already have. Then, I tried just creating the water ripples in my shape - but again that leaves gaps and when I try to "slice" them away it does all kinds of weird things to the shape..
any way to delete more than a single shape at a time from a shape collection file, other like step by step with the option key? I have one collection with about 400 shapes and would like to save it to some "groups", like people, arrows, devices..
View 1 Replies View RelatedSince the release of Photoshop CC the "Live Shape Properties" has basically chosen when it does and does not want to show up.... sometimes I even create a new shape to replace the old one and it STILL does not show the live shape properties... how hard is it to make sure the options are available at all times? I opt for a discount since this is a half working application and the features you highlighted barely function...
View 1 Replies View RelatedI just installed CD on my daughter's computer and her shape tool only allows for a free form selection by following the cursor in a free form way. My install allows for a rectangular click-and-drag type of selection. I see no options for this tool Is her install bad?
View 5 Replies View Relatedi am trying to draw an aircraft and after drawing the windows, i got stuck. i am trying to revolve a shape around the shape of the window (oval) but it won't recognise that shape as an axis. i can't click it. is there a solution to this?
here is a screenshot for extra info!
I am using Illustrator CS3 on a Mac 10.5.8.
I am trying to create a compound shape from a compound shape I have prepared.
The first part works okay. I can combine the hexagon-compound-shape I have created from multiple hexagon shapes.
I then want to cut away the edges on a part of the compound shape (using a box of 4 rectangles), which is supposed to give me a rectangle with only the lines from the compund-shape inside this rectangle (image 1).
But when I cut away the box around my hexagon-compound-shape (using the Pathfinder window), the hexagon-compound shape inside behaves strangely, with only some of the lines showing and other lines missing (image 2).
I would like the rectangles to simply just cut away the lines that the rectangles are covering, and leave behind the lines in my hexagon-compound-shape, as they appeared in image 1, and not having hexagon-compound-shape changing which lines appear and disappear.
Here when ever i click on the editable poly modifier again this happens, now im pretty sure this is not supposed to happen,
i tried searching the internet and several forums but no results (maybe im just missing some 3dsmax vocabulary so i didnt coin the term for it)
How do i use a specific shape to carve out a primary shape
e.g. putting a sphere inside a box (sphere is protruding from all 6 faces) and carving out the box
Edit: changed the image to a link and added the scene file as an attachmentbutcher_knife.zip
Is it possible to fill a shape with a gradient fill so it goes up to all edges and gradually get darker/lighter inwards? For example, If I have a star shape, can I have a gradient fill in the shape of a 'star'?
View 1 Replies View RelatedI am trying to distort/shape a photo to fit into another shape, in the shape of a shield. Its something that would be reused on otehr pictures.
2 things i would like to do, first is of course as above
the otehr, is there any way to creat like a rubber stamp or a cutting tool, that once I have the shape I want created, I can use that to copy/cut/paste that image shape from otehr images also ?
This is something that has bugged me for ages. Sometimes i have real problems making a circular hole in another shape. I would normally use 'back minus front', but when i do this a lot of the time Corel adds the nodes into the shape but it doesn't actually cut out the area. Hopefully the graphics here will explain this better.
So i want to cut the three white circles from the blue background, but you can see the results:
The odd thing is this doesn't always happen. If i just draw a square and a circle, and cut one from the other, it works fine. Also, is there an easy way to 'punch' out the nodes that it has left in there to make the hole in the shape?
Is it possible to creat a selection with scissors for example and then drag that shape somewhere else to cut it there.
I need to cut a piece of wall in a difficult shape inbetween things. so thats why i want top creat that difficult shape and then cut it from the wall.
Or am I getting it totally wrong and should i try another method?
I can't transform my shape in Illustartor CC. i.e - I have a rectangle which I can neither scale, nor rotate.
View 9 Replies View RelatedI have imported some vector triangle shapes from Sketchup into Illustrator. I have never used Illustrator before and wondering is there a way that I can find out the exact length of one of the sides of the vector triangles?
View 7 Replies View RelatedFor combining shapes, isn't the Shape Builder tool essentially the same thing as using Unite in the Pathfinder? Is there some other advantage to using it?
View 1 Replies View Related I don't know the right keywords. If I make an art brush, say two solid rectangles when I apply this to a shape such as a square or star, there is a corner/point that doesn't seem connected, I get a gap/split. I'm guessing it is where the brush has started/ended along the path. These shapes are closed though right? Is there a way to avoid the gap/split? I noticed if I use the pen tool to give the point handles it'll seem connected, however now the shape is not a corner.
I know I can also use the appearance panel and set two strokes aligned along the outside, but this does not seem easy to update sizes, say I had 7 strokes for a rainbow for example each at 5 pt and wanted to update that to 7pt I would have to manually update each one? I also don't think I can use the appearance panel to set up a gradient stroke that flows along the path, such as a square with rounded corners applied, when I tried with the appearance panel it was as if it was masking a gradient beneath it.
I am using CS6, though I'm planning to switch to CC.
Editing someone else's file
They have a Square with an oval in the middle used as a clipping mask
When I click on the object, I can only modify the outside square, not the inside oval
What kind of a shape is this, and can I edit the oval? I don't use Illustrator much.
I want to 'imprint' a shape with text. The result being that the words in that shape will show whatever background color the shape is placed upon.
View 17 Replies View Related