GIMP :: How To Print 4" X 6" Photograph
Mar 28, 2012
I'm trying to print a 4" X 6" photograph from Gimp to my Canon Pixma MG6120 using the rear paper holder (that's probably not relevant).
I believe there is no setting in Gimp or on the Pixma that I have not set to 4" X 6"' (a couple of hundred times if I may be allowed a small bitch). However when the print preview comes up it shows 8.5 X 11. Maybe it's a printer issue or maybe it's something I'm doing in Gimp but I cannot figure it out.
I love Gimp although currently having some kind of problem with Python 2.6.6 (totally another issue).
View 5 Replies
ADVERTISEMENT
May 8, 2011
I am looking to extract natural noise from a photographs material and create a black and white layer out of it, but I am new to photoshop and unsure how to proceed with this.
For example, here is a photograph of a hard plastic gun.
I have seen on forums where users will find a good reference image and use it to create a new black and white noise picture utilizing the reference.
For instance the hard plastic noise from the gun, might look like this once extracted and done correctly.
how to produce something such as this?
View 2 Replies
View Related
Aug 13, 2012
How do you add texture to a photograph?
View 1 Replies
View Related
May 17, 2011
Is it possible to save the things I did to edit a photograph as a single file (preset or script maybe?) so that I can apply same to another photograph or as a batch process to more than one photograph?
View 1 Replies
View Related
Oct 26, 2012
For some reason I cannot print the whole of an image onto an A4 sheet of paper. I have 2 problems
a) I want the image to be exactly the size of the paper (with no margin). I have removed the margin from the printer dialogue and used the 'print size' command to make the image the right size for an A4 image. The print preview shows there's no margin, but the print still has a small margin.
I am losing about 10 columns of pixels from the left side of the image. Once again the whole image is shown in the preview, but the print has data missing. This still happens when I reduce the size of the image so that there's plenty of room on the paper.
View 2 Replies
View Related
Mar 16, 2012
I have managed to reset the print size for smaller images (7,5 by 5 centimetres) and they have worked fine. But now I need a print 90 mm (9cm) by 150mm (15 cm) and even after unlocking the chain the print comes out at 150 by 115 mm...I've tried it about 50 times now and it's always the same.
View 1 Replies
View Related
Jun 25, 2012
When I scan an image, in this case a standard A4 size, and do modifications with Gimp I am making progress in getting a reasonably good result but when I try to print out the final image I would like it to be precisely the exact same size as the original . As it turns out the scan becomes slightly smaller than the original and when I print to A4 paper I get an ugly border. which is either a hard line paper edge or slightly contrasting color (not the pure white original border around my picture).
How to change the size of the image once my scanner puts it into Gimp so that it will correspond with the original, or even overlap by a tiny amount, to eliminate the awful edges. Do I adjust the size of the canvas or the image, or both, and if so what are the tools to use. I've tried some Gimp tools that say they adjust the size of the image but they seem to shrink it in relation to the canvas instead of expanding it. Intuitively, since the image consists of pixels, it would seem there should be a simple way to increase the spaces between all the pixels so that the image increases in size. However I'm discovering that Gimp can be quite counter intuitive.
View 1 Replies
View Related
Sep 30, 2011
i was reading a post in which it says Gimp is not recommended for Print..
View 3 Replies
View Related
Jun 10, 2011
Gimp is 2.6.11 (with the print bug fixed!?)
Printer is Kodak ESP5200 All in One, operating in wireless mode.
Op sys is Windows 7.
Symptom: any print request from GIMP results in the printer stuck at 0% spooled.
Going to other (native) Windoze applications for printing really sucks. The built in print function scales to whatever it thinks convenient. Windows Paint also does ambiguous scaling. All I want is an exact scale print ... and GIMP used to do this very well.
Clarification added: GIMP handles dimensions perfectly, and all I want is for it to print. I have no interest / desire to push the image in to some other application just to get it printed.
View 4 Replies
View Related
Apr 20, 2012
I have a printer A0 format and i want to print picture A0 size on it. But when I try to setup the "Page Setup" only A4 is possible.
How to setup to print A0 to A0 in scale 1:1?
View 1 Replies
View Related
Oct 23, 2012
I put a picture in gimp and when I go to print it it isn't a size anything like the picture in gimp. It's sometimes way bigger or smaller . How do I resize the picture to the size I want to print it.
View 3 Replies
View Related
Jul 5, 2013
The changes are quite evident on the screen but not at all on paper. I've flattened and saved the image as jpg before printing. Image is 300ppi. 4in x 6in.
View 3 Replies
View Related
Apr 2, 2013
What I want to do is make a Ruler. In particular a Ruler that goes up to 360. This is going to be a Liner Setting Circle that I am going to use to wrap a Dobsonian Base with. So these are going to be in Degrees.
My plan was to try and break up each degree in to 20 increments. I was hoping to used the (Filter>Render>Pattern>Grid) feature to do this in layers. To have 3 Layers overlapping. One are 360 for the main degree marks. One at 3600 for the increments of 2 between each degree. One 7200 for the increments of 1 between each degree.
View 5 Replies
View Related
Mar 26, 2013
I have watched another person move a signature from one location to another and then clone the area where he took it from. This was so that I could crop a painting for print to fit a certain size and needed to. It will happen quite a bit for me, as artists sign fairly close to the bottom edge generally.
View 5 Replies
View Related
Oct 31, 2012
I'm new and I have been using GIMP 2.6. Is there any possible way to print double sided?
View 1 Replies
View Related
Oct 27, 2010
I am using an r1900 Epson a3 printer. I am trying to print my images on A3 paper however no matter what settings i change they always appear as a4. I have change the scale, fit to canvas and page set up all with no effect.
View 1 Replies
View Related
Oct 13, 2012
Brand new GIMP user. I have been able to layer my pictures to create the effect I want. My problem is PRINTING. I can print but it is only printing half of the picture. Trying to print 4x6. If I flip the setup on my printer to landscape it only shows the bottom of the picture and it is not centered, the right size, and is on the top middle of my 4x6 photo paper. If I leave at portrait, it only hows the right side of the picture and, again, is the worng size and on the left side of the photo paper. Obviously I am missing something very basic?
View 1 Replies
View Related
Mar 8, 2012
I'm a very new user to GIMP but have been using paint shop pro for quite some time - I still use version 7
Here's the situation: I received a pdf that I want to print so I imported it into gimp. It's 8.5x11 at 100dpi & two pages. So I imported it as two images (not layers) at same resolution settings. White out the unnecessary images go to print and then to printer preferences. 300 dpi is the smallest resolution on my printer so I also select 8.5x11 paper & 'sale to fit.' The resulting image is so large that approx only the top-left quarter of the doc prints.
OK, so in GIMP I go to 'Print Size' change the image resolution to 300 pixels: same result, exactly
Print size isn't it, lets try 'Scale Image' at 300 pixels. Same result again...
I tried both settings above with 'scale to fit' (printer) on & off with absolutely no changes to the printed image... very strange. Is gimp overriding my printer settings? If so how do I correct this?
Interestingly, when I re-sized the images in gimp (or thats what I thought I was doing with 'print size' & 'scale image') the size of the view-able image on the desktop in the application window did not change... the size of the window stayed the same, the zoom percentage did not change & most importantly the image did not change.
Finally, I checked if the original image prints correctly in Adobe Reader: No problem and it prints fine. Unfortunately, while I have what I need, I'm not one to give up that easily and want to know if the issue is the printer, gimp.
Why I can't get the image to print in GIMP at the correct size?
Windows XP Home SP3 - I just reformatted the hard drive last week so everything is a new clean install
Hp Officejet 4215 all-in-one
GIMP 2.4.7
View 3 Replies
View Related
Jun 9, 2011
Is it possible to add a custom paper size to Gimp? I have a new HP wide format printer and was looking for a capability to customize the paper size. Hewlett Packard and Microsoft have said that the customization of paper size is application specific even though Microsoft tells you can customize paper size through server properties , which on my XP machine will not save the custom settings.
Note: This page, even though it is not a Microsoft page, shows what Microsoft tells you to do. [URL]
View 6 Replies
View Related
Jul 28, 2011
I've been trying to print an image I made with GIMP in cyan colour, but the printer prints it in green. I even tried to print at Staples, but it still comes out in either green or regular blue. How to fix this discrepancy? Shouldn't you be able to print the image exactly as it is shown in GIMP or is there an issue involving JPEG files?
View 3 Replies
View Related
Aug 18, 2013
Just recently moved to Gimp. I like it but I am struggling. Millions of questions, but to start: How can I alter the resolution of and image without changing its physical size. I am trying to keep to a print size of 7x5", and reduce the resolution to 300pixel/inch. When I go to: 'set image print resolution' and change the X and Y resolution, the 'Print Size' changes with it. I have tried everything I can think of. I have make a new file at the correct resolution and pasted the image in, but the colors in the photos changed, so I dumped that idea.
View 1 Replies
View Related
May 14, 2012
If a picture can be resized to print in a different size? I am trying to print a 5x7 and I have scoured the tools in Gimp and even tried to do it through my printer to no avail!
View 5 Replies
View Related
Mar 12, 2013
As I understand, Gimp make GTK, used in Gnome. GTK provides a dialog for selecting a printer and specifying the options for that printer. My problem is that whenever I'm faced with this dialog, it's a completely random set of settings; it's not the printer defaults (specified in CUPS) and it's not the last-used settings either for the user or the application.
It's a big productivity issue when I regularly print documents and high res photos and need to change ~10 or so options each time. Invariably I forget to change one of them and have to print something twice.
Is there any way to control these default print settings? I'd like it to pick up the CUPS defaults for the print queue selected.
View 3 Replies
View Related
Jun 25, 2011
My end goal is to have a PDF image that is 13in(h) x 19in(w).
Image / Print Size is exactly 13x19. However, when I print to a PDF printer, and set the page size within the Print Preferences to Custom 13x19, I still get a much larger page than the image is.
I see message boards say to use File / Page Setup and select a Custom Print size. I do not see this as an option.
I've tried saving to PNG and then opening in other programs, but it makes the image much larger, and it affects the set-up.
View 1 Replies
View Related
Aug 13, 2012
I am trying to resize an A4 immage so that it will print on 4 A4 sheets, making it an A3. I have tried but I did'nt manage to do it, it resized it back to A4.
View 1 Replies
View Related
Jan 2, 2012
Any way to improve a photo in GIMP so that it can be printed in larger formats? Enlarging seems to be okay, adding a black bg and setting layer mode to overlay also seems to have worked, but as I am aiming at selling my photos, I want to be 100% sure I deliver a good enough product!
View 1 Replies
View Related
Jan 17, 2013
I understand GIMP may not be the best program to use to create business cards but as a start-up I need a cheap/free program!! Anyway I have designed the cards and am having them professionally printed but when I did a test print on my home computer, the quality seems very poor. Mainly the text is blurry. It looks fine on my screen though.
View 1 Replies
View Related
Mar 12, 2013
I can't figure out how to map a PHOTOGRAPH to a perspective grid and it's driving me CRAZY!!! I can make shapes or text or anything map to the grid, but the photo's won't even be selected by the selector tool. What am I doing wrong???
View 7 Replies
View Related
Nov 25, 2012
How do I put my name on a photograph in Lightroom 2.4
View 2 Replies
View Related
Jul 16, 2012
How i could create Leopard and Candy/Sugar Lips. i Know how to create Rainbow lips but not sure how to create leopard or candy/sugar lips.
View 2 Replies
View Related
Aug 18, 2011
I'm trying to print a landscape image but the image is reduced when printed. I open a new A4 sized template and make my image but when it comes time to print the image is smaller on the page than A4. Is there an easy solution to this? I have messed around with orientation both in GIMP and my printer settings, I have used the printers' "fit to page" setting and tried everything I can think of.
View 4 Replies
View Related
