GIMP :: Changes To Coloring Don't Show On Print
Jul 5, 2013The changes are quite evident on the screen but not at all on paper. I've flattened and saved the image as jpg before printing. Image is 300ppi. 4in x 6in.
View 3 Replies
ADVERTISEMENT
Photoshop :: Print-screen Paste Colors/PS Coloring Off By A Mile!
Aug 31, 2006If I do a print screen and paste, for instance, a website into Photoshop, the colors are off by a MILE. Everything appears all washed out, it's really awful.
I have PS CS at work, and am not having this problem. I uninstalled and reinstalled photoshop, and so far, none of the changes I've made in edit > color settings
GIMP :: Coloring With The Eraser?
Jan 21, 2014I just watched about coloring black and white photos had me using the eraser to add the color, he didn't explain why and I now need to know how to erase something if I don't like it.
View 1 Replies View RelatedGIMP :: Coloring The Lineart
Feb 22, 2012I'd love to color linearts with GIMP. But I have few problems. Actually only one. First my problem was that I was only allowed to use black/grey colors (so gotta change the photo as a RGB mode). Now I have new problem. You see, I've made few layers (layers for background, lineart, colors..) but when I'm trying to color the lineart (and I'm "in color layer") any of that color isn't showing?
I made the color layer as transparent. I don't know is the "lineart layer" transparent, but haven't seen a button where I could change its mode.
GIMP :: Coloring In Scanned Pages?
Mar 24, 2013I'm trying to get myself a little better with digital art, but still not too comfortable with the idea of doing the initial drawing without pen and paper. The only downside is that I can't really get those crisp colors with just pencil colors.
how do I go about setting things up to where I can color in a scanned, non-colored inked page, but without worrying about overlapping my inks and making it look messy in general. I imagine it would have something to do with copying and pasting new layers, but I just can't get a handle on what I'm supposed to do. I also know about messing with opacity to let outlines show through, but there's still the issue of color dulling the black when it overlaps.
GIMP :: Coloring B&W Image With Gradient Colors?
Jan 20, 2013I'm designing a banner for my gaming guild's forums. I have draw the logo/banner and textured it. After Desaturating the image im left with a nice B&W image.
I know of many ways to color the image but everytime that I do the color doesn't match the other colors we have on the forums.
What I want to do is color the image according to a color gradient that we use on the forums.
I would like to have the whitest pixels of the banner be the lightest color from the gradient(#c0a864) and the darkest pixels of the banner be the darkest color from the gradient(#917341). And have GIMP interpolate between those two colors for the other pixels in between the lighest/darkest.
Similar to how a Bumpmap works, only instead of simulating depth based on the range of colors from Black to White, I want it to colorize the banner.
GIMP :: Coloring Layers Based On Data Set
Jun 20, 2011I am hoping to utilize GIMP to map the results of a research project. Is it possible to color defined layers based on a data set? For example, is there a way to use GIMP features to edit an Adobe Illustrator editable map by importing an excel document containing two columns: one column containing the names of the defined layers and another column containing the color value in hex code. Based on this document, could I use GIMP to easily apply the colors to the layers?
View 2 Replies View RelatedGIMP :: Coloring Line Art Keeping The Lines
Jul 26, 2013My main art is drawing my own line arts the coloring them on gimp. I've successfully done it a few times and now haven't used gimp in a year. I'm pretty sure I'm doing everything right, but my transparent top layer over the original is not staying transparent when I try to color. I want the lines from the original to stay but it looks neater when I layer to color. Why is the top layer not staying transparent like I've had it before?
View 1 Replies View RelatedGIMP :: Invert Channel - Coloring Line Art
Feb 15, 2012I don't do a lot of digital coloring or painting but when I do it's very comic book style. I have a method I use (you hay have seen it at polykarbon.com.)
This is how it works. Get some good clean line art in RGB mode.
In Channels, duplicate the blue layer and INVERT it.
Go back to the Layer fill the whole image with white. Then create two new layers above the background layer.
On the top layer, go to Select and pick Load Selection. Pick Blue Copy. You see the marching ants.
Fill this selection with black. Now you have a layer of your line art, a middle layer on which you can color without messing them up, and then a background.
I haven't been able to do this in Gimp. I'm willing to learn a new coloring method but I really like this one. It's easy and fast and really allows for a lot of customization. You can color the lines, do masks, etc.
My problem is the part about INVERTING the channel.
GIMP :: Coloring Book App - Make Image Fillable
May 10, 2013New to GIMP! How to make an image ready for like a bucket or fill function. I am making a coloring book app so, I needed to make my images transparent PNG's so that the fill and drawing function are usable on them. I have made it transparent and added an alpha channel so I am able to draw on it, but fill it not so much.
View 2 Replies View RelatedGIMP :: Convert Photo To Line Art (coloring Book)
Mar 19, 2011How to do this? convert photo to line art (coloring book)
View 2 Replies View RelatedLightroom :: Print Doesn't Show A Selected Photo And Won't Print
Oct 13, 2012How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedGIMP :: Coloring Outline Drawing And Removing The Outline?
Jan 10, 2013I have a black-and-white outline drawing that I want to color in using the "Bucket Fill" tool. There are two things I'd like to do to make it easier:
1. Is there a way to prevent Bucket Fill from leaking through small gaps in the drawing? Usually what happens is, I fill in one region, and then suddenly a much larger region gets filled in. I then have to examine the borders of the region for a small opening, close the gap with black, and then try again. Is there a feature that lets me say e.g. "Don't fill through gaps less than 4 pixels wide"?
2. Once I'm done coloring, I want to remove the black outline to make a more realistic, less cartoony image. However, it's tedious to go and paint over every segment of the outline with the color of its adjoining regions. What I want to do is essentially: Replace every black pixel in the image with the color of the closest non-black pixel. Is there a feature that does this?
Also, if there are third-party plugins that do these things, that would work just as well.
Photoshop :: How To Show Actual Print Size
May 6, 2013I was watching a video about Photoshop and the pro broached the subject of how to set your PS preferences, so that you get a true representation of your documents print size. Seems this was a topic a while back and I'm not sure it was ever answered. Here is an explanation and the fix.
Seems that Adobe sets the default for screen resolution in Preferences/ Units and Rulers to 72ppi. Today's monitors are usually more than that, so when you tell PS to show you Print Size, it's going to show you something less than what it actually is. To fix this is actually pretty simple. Here's how.
1. Create a new document 9" x 9" @ 300ppi, use white for the background color.
2. In your zoom mode activate Print Size
3. Grab a tape measure and carefully measure what your seeing on the screen. If it is not 9x9, then your setting is not set properly in Preferences/Units and Rulers.
4. More than likely your measurement is smaller by a good bit. At this point, create a correction factor by dividing 9 by the actual measurement.
5. Then, in the Preferences as previously described, if 72ppi, multiply by the factor you just created and enter it exactly (not rounded) to the decimal point.
Now, when you ask PS to show Print Size it will show you the actual, not something less.
AutoCAD LT :: Print Preview In 2012 Show Lines?
Oct 26, 2011I've create drawing in model, after design I arrange it in layout tab. Once after finish, I want to print it but in print preview there are some lines show up direct to bottom right of paper. I look into drawing, there are not lines, I check there are no layer turn off
View 1 Replies View RelatedAutoCad :: Some Objects Hidden By Wipeout Show Up In Print?
Jul 22, 2011I still trying to get 2012 to configured like our previous version. Howcver, I noticed something odd. In several of our drawings I covered some objects with a wipeout. I then sent to the dwg to pdf driver, then printed the pdf. On screen the objects are covered, in the pdf on screen the objects are covered, but in the actual print from the pdf some of the objects are faintly visible. with the previous 2010 version of AC we used. The files are the same and the printer is the same.
View 9 Replies View RelatedAutoCad :: Trying To Show Only Portion Of Drawing In Layout To Print
Feb 2, 2014How to get only part of the drawing to show up to print. I've drawn a floor plan and have copied it several times. I have also drawn several patterns that represent a few different floor tile layouts and then put them over each floor plan and after some trimming I have a variety of options that someone can choose from for floor tile layout. I'd like to show each one on a separate sheet and of course when I go to layout the whole drawing comes over and how to only show one floor plan at a time.
View 4 Replies View RelatedLightroom :: Picture Do Not Show In Print Module After Upgrading?
May 22, 2012Picture do not show in Print module after I upgrade the frm LR3 to LR 4
View 2 Replies View RelatedInDesign :: Print Dialog Takes Forever To Show Up
Apr 2, 2014Every time need to Print on IdesignCS2 and press the print dialogue it takes for ages before it shows up. I have a feeling that its due to the excessive amount of printer drivers installed. Where can i find them to delete them cause i don't use them!
View 4 Replies View RelatedAutoCAD Print / Plot :: Show Only Specific Paper Size
Aug 19, 2011How to set the printer setting in Autocad that only show ISO paper size only? Currently i am using HP DESIGNJET 800 42 and when i need to do plotting, it show me a bunch of unnessary of paper size list as shown in attachment.
View 9 Replies View RelatedAutoCAD Civil 3D :: Background Mask Doesn't Show / Print
Jun 17, 2012I'm on Civil3d 2010. I have a drawing where i have background masks on most of my text - everything works great. Then I did a "Save As" to give the drawing a new name. After working in it for a day or so, I noticed that all of the text masks don't show. When I hover over mtext (or blocks with mtext), a border shows around the text (only when hovering). But bottom line is the background mask doesn't show at all or print. The original drawing is still fine.
I've checked and this has nothing to do with line merge in the pc3 file etc.
AutoCAD Print / Plot :: 2 Of 3 Viewports In Paper Space Do Not Show Up?
Mar 11, 20082 of 3 viewports in paper space do not show up in print preview, nor will they print. The viewports are all on the same layer, defpoint layer. Even if I create 3 new viewports and erase the old ones, still can only print preview one viewport and only one viewport will print.
View 6 Replies View RelatedIllustrator :: Display / Show/ Print Point Or Anchor Coordinates In CS5
Mar 21, 2013I don't simply want to see the coordinates when I hover over a point. I want the coordinates actually showing on the document. Is there a plug-in that can accomplish this easily?
View 4 Replies View RelatedIllustrator :: Print With Black Border To Show Page Edge?
Nov 8, 2012I'm printing a letter size document from illustrator at 50% size. All pages have a white background so I would like to have the document print with a black rule/ border around it so I can tell what it will look like. Is there a way to do this without manually putting a rule around all 25 existing artboards? Or is there a way to do this in the Acrobat pdf I'm outputting from this doc?(CS5)
View 3 Replies View RelatedPhotoshop Elements :: 9 Fails To Show Preview - Unable To Print?
Mar 24, 2014Changed printer from HP to Canon today and cannot get into the print from PSE 9 mac - no image on photo. I re-installed PSE 9 and still the problem remains.
View 3 Replies View RelatedIllustrator :: Show Print Tiling Menu Option Not Working
Jan 24, 2014I'm having an issue with the "Show Print Tiling" menu option not working at all.
I have setup a bleed for my document and have even tried a settings reset.
CorelDRAW Graphics Suite X4 :: When Mirror Horizontally And Print Text Will Not Show Up
Aug 4, 2013When I mirror horizontally and print the text will not show up. I can print fine Vertical, normal but not horizontal?
View 2 Replies View RelatedLightroom :: Print Module - Show Single Pages In Custom Package?
Jul 20, 2013I'm using Lr4.
I'd like to prepare a multiple pages package in the Print Module. I need to view each single page, as because every time I add new page the cells become smaller and it's hard to arrange the images well.
GIMP :: Font Won't Show Up (OSX)
Aug 15, 2013I'm using MAC OSX.
I downloaded a font called Palace Script in ttf format. I found my fonts folder in Gimp and copied the font file to the fonts folder.
Then I restarted Gimp.
The font does not show up when I try to select it.
I also tried installing the font using the font manager and it installed, and I can only use it Pages.
GIMP :: Wrap Map Doesn't Show
Feb 12, 2012Wrap Map doesn't show. I installed Python.
View 5 Replies View RelatedGIMP :: Can't Get Font Size To Show Up
Nov 6, 2012I do love GIMP but having a serious problem. When I go to use text, I simply can't get the font size to show up so I can adjust it.
PS using 2.6, this laptop can't do 2.8.